Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userUltra-compact graphene plasmonic photodetector with the bandwidth over 110GHz
101
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Graphene-based photodetectors, taking advantage of high carrier mobility and broadband absorption in graphene, have recently experienced rapid development. However, their performances with respect to the responsivity and bandwidth are still limited by either weak light-graphene interaction or large resistance-capacitance product. Here, we demonstrate a waveguide coupled integrated graphene plasmonic photodetector on the silicon-on-insulator platform. Benefiting from plasmonic enhanced graphene-light interactions and subwavelength confinement of the optical energy, we present a small-footprint graphene-plasmonic photodetector with bandwidth beyond 110GHz and intrinsic responsivity of 360mA/W. Attributed to the unique electronic bandstructure of graphene and its ultra-broadband absorption, the operational wavelength range extending beyond mid-infrared, and possibly further, can be anticipated. Our results show that the combination of graphene with plasmonic devices has great potential to realize ultra-compact and high-speed optoelectronic devices for graphene-based optical interconnects.
rate research
Read More
Graphene has extraordinary electro-optic properties and is therefore a promising candidate for monolithic photonic devices such as photodetectors. However, the integration of this atom-thin layer material with bulky photonic components usually results in a weak light-graphene interaction leading to large device lengths limiting electro-optic performance. In contrast, here we demonstrate a plasmonic slot graphene photodetector on silicon-on-insulator platform with high-responsivity given the 5 um-short device length. We observe that the maximum photocurrent, and hence the highest responsivity, scales inversely with the slot gap width. Using a dual-lithography step, we realize 15 nm narrow slots that show a 15-times higher responsivity per unit device-length compared to photonic graphene photodetectors. Furthermore, we reveal that the back-gated electrostatics is overshadowed by channel-doping contributions induced by the contacts of this ultra-short channel graphene photodetector. This leads to quasi charge neutrality, which explains both the previously-unseen offset between the maximum photovoltaic-based photocurrent relative to graphenes Dirac point and the observed non-ambipolar transport. Such micrometer compact and absorption-efficient photodetectors allow for short-carrier pathways in next-generation photonic components, while being an ideal testbed to study short-channel carrier physics in graphene optoelectronics.
A fast silicon-graphene hybrid plasmonic waveguide photodetectors beyond 1.55 {mu}m is proposed and realized by introducing an ultra-thin wide silicon-on-insulator ridge core region with a narrow metal cap. With this novel design, the light absorption in graphene is enhanced while the metal absorption loss is reduced simultaneously, which helps greatly improve the responsivity as well as shorten the absorption region for achieving fast responses. Furthermore, metal-graphene-metal sandwiched electrodes are introduced to reduce the metal-graphene contact resistance, which is also helpful for improving the response speed. When the photodetector operates at 2 {mu}m, the measured 3dB-bandwidth is >20 GHz (which is limited by the experimental setup) while the 3dB-bandwith calculated from the equivalent circuit with the parameters extracted from the measured S11 is as high as ~100 GHz. To the best of our knowledge, it is the first time to report the waveguide photodetector at 2 {mu}m with a 3dB-bandwidth over 20 GHz. Besides, the present photodetectors also work very well at 1.55 {mu}m. The measured responsivity is about 0.4 A/W under a bias voltage of -0.3 V for an optical power of 0.16 mW, while the measured 3dB-bandwidth is over 40 GHz (limited by the test setup) and the 3 dB-bandwidth estimated from the equivalent circuit is also as high as ~100 GHz, which is one of the best results reported for silicon-graphene photodetectors at 1.55 {mu}m.
Topological photonics has revolutionized our understanding of light propagation, but most of current studies are focused on designing a static photonic structure. Developing a dynamic photonic topological platform to switch multiple topological functionalities at ultrafast speed is still a great challenge. Here we demonstrate an ultrafast reprogrammable plasmonic topological insulator, where the topological propagation route can be dynamically steered at nanosecond-level switching time, namely more than 10^7 times faster than the current state-of-the-art. This orders-of-magnitude improvement is achieved by using ultrafast electronic switches in an innovative way to implement the programmability. Due to the flexible programmability, many existing photonic topological functionalities can be integrated into this agile topological platform. Our work brings the current studies of photonic topological insulators to a digital and intelligent era, which could boost the development of intelligent and ultrafast photoelectric devices with built-in topological protection.
We present a graphene photodetector for telecom applications based on a silicon photonic crystal defect waveguide. The photonic structure is used to confine the propagating light in a narrow region in the graphene layer to enhance light-matter interaction. Additionally, it is utilized as split-gate electrode to create a pn-junction in the vicinity of the optical absorption region. The photonic crystal defect waveguide allows for optimal photo-thermoelectric conversion of the occurring temperature profile in graphene into a photovoltage due to additional silicon slabs on both sides of the waveguide, enhancing the device response as compared to a conventional slot waveguide design. A photoresponsivity of 4.7 V/W and a (setup-limited) electrical bandwidth of 18 GHz are achieved. Under a moderate bias of 0.4 V we obtain a photoconductive responsivity of 0.17 A/W.
A novel thin-film LiNbO3 (TFLN) electro-optic modulator is proposed and demonstrated. LiNbO3-silica hybrid waveguide is adopted to maintain low optical loss for an electrode spacing as narrow as 3 {mu}m, resulting in a record low half-wave-voltage length product of only 1.7 V*cm. Capacitively loaded traveling-wave electrodes (CL-TWEs) are employed to reduce the microwave loss, while quartz substrate is used in place of silicon substrate to achieve velocity matching. The fabricated TFLN modulator with a 5-mm-long modulation region exhibits a half-wave-voltage of 3.4 V and merely 1.3 dB roll-off in electro-optic response up to 67 GHz, and a 3-dB modulation bandwidth over 110 GHz is predicted.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
