Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userProducing High Concentrations of Hydrogen in Palladium via Electrochemical Insertion from Aqueous and Solid Electrolytes
59
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Metal hydrides are critical materials in numerous technologies including hydrogen storage, gas separation, and electrocatalysis. Here, using Pd-H as a model metal hydride, we perform electrochemical insertion studies of hydrogen via liquid and solid state electrolytes at 1 atm ambient pressure, and achieve H:Pd ratios near unity, the theoretical solubility limit. We show that the compositions achieved result from a dynamic balance between the rate of hydrogen insertion and evolution from the Pd lattice, the combined kinetics of which are sufficiently rapid that operando experiments are necessary to characterize instantaneous PdHx composition. We use simultaneous electrochemical insertion and X-ray diffraction measurements, combined with a new calibration of lattice parameter versus hydrogen concentration, to enable accurate quantification of the composition of electrochemically synthesized PdHx. Furthermore, we show that the achievable hydrogen concentration is severely limited by electrochemomechanical damage to the palladium and/or substrate. The understanding embodied in these results helps to establish new design rules for achieving high hydrogen concentrations in metal hydrides.
rate research
Read More
Electrochemical ion insertion involves coupled ion-electron transfer reactions, transport of guest species, and redox of the host. The hosts are typically anisotropic solids with two-dimensional conduction planes, but can also be materials with one-dimensional or isotropic transport pathways. These insertion compounds have traditionally been studied in the context of energy storage, but also find extensive applications in electrocatalysis, optoelectronics, and computing. Recent developments in operando, ultrafast, and high-resolution characterization methods, as well as accurate theoretical simulation methods, have led to a renaissance in the understanding of ion-insertion compounds. In this Review, we present a unified framework for understanding insertion compounds across time and length scales ranging from atomic to device levels. Using graphite, transition metal dichalcogenides, layered oxides, oxyhydroxides, and olivines as examples, we explore commonalities in these materials in terms of point defects, interfacial reactions, and phase transformations. We illustrate similarities in the operating principles of various ion-insertion devices ranging from batteries and electrocatalysts to electrochromics and thermal transistors, with the goal of unifying research across disciplinary boundaries.
Investigations within the local spin density functional theory (LSDF) of the intermetallic hydride system $ {rm CeRhSnH_x} $ were carried out for discrete model compositions in the range $ 0.33 leq x_H leq 1.33 $. The aim of this study is to assess the change of the cerium valence state in the neighborhood of the experimental hydride composition, $ {rm CeRhSnH_{0.8}} $. In agreement with experiment, the analyses of the electronic and magnetic structures and of the chemical bonding properties point to trivalent cerium for $ 1 leq x_H leq 1.33 $. In contrast, for lower hydrogen amounts the hydride system stays in an intermediate-valent state for cerium, like in $ {rm CeRhSn} $. The influence of the insertion of hydrogen is addressed from both the volume expansion and chemical bonding effects. The latter are found to have the main influence on the change of Ce valence character. Spin polarized calculations point to a finite magnetic moment carried by the Ce $ 4f $ states; its magnitude increases with $ x_H $ in the range $ 1 leq x_H leq 1.33 $.
Finding new ionic conductors that enable significant advancements in the development of energy-storage devices is a challenging goal of current material science. Aside of material classes as ionic liquids or amorphous ion conductors, the so-called plastic crystals (PCs) have been shown to be good candidates combining high conductivity and favourable mechanical properties. PCs are formed by molecules whose orientational degrees of freedom still fluctuate despite the material exhibits a well-defined crystalline lattice. Here we show that the conductivity of Li+ ions in succinonitrile, the most prominent molecular PC electrolyte, can be enhanced by several decades when replacing part of the molecules in the crystalline lattice by larger ones. Dielectric spectroscopy reveals that this is accompanied by a stronger coupling of ionic and reorientational motions. These findings, which can be understood in terms of an optimised revolving door mechanism, open a new path towards the development of better solid-state electrolytes.
This paper investigates some of the successes and failures of density functional theory in the study of high-pressure solid hydrogen at low temperature. We calculate the phase diagram, metallization pressure, phonon spectrum, and proton zero-point energy using three popular exchange-correlation functionals: the local density approximation (LDA), the Perdew-Burke-Ernzerhof (PBE) generalized gradient approximation, and the semi-local Becke-Lee-Yang-Parr (BLYP) functional. We focus on the solid molecular P$6_3$/m, C2/c, Cmca-12, and Cmca structures in the pressure range from $100<P<500$ GPa over which phases I, II and III are observed experimentally. At the static level of theory, in which proton zero-point energy is ignored, the LDA, PBE and BLYP functionals give very different structural transition and metallization pressures, with the BLYP phase diagram in better agreement with experiment. Nevertheless, all three functionals provide qualitatively the same information about the band gaps of the four structures and the phase transitions between them. Going beyond the static level, we find that the frequencies of the vibron modes observed above 3000 cm$^{-1}$ depend strongly on the choice of exchange-correlation functional, although the low-frequency part of the phonon spectrum is little affected. The largest and smallest values of the proton zero-point energy, obtained using the BLYP and LDA functionals, respectively, differ by more than 10 meV/proton. Including the proton zero-point energy calculated from the phonon spectrum within the harmonic approximation improves the agreement of the BLYP and PBE phase diagrams with experiment. Taken as a whole, our results demonstrate the inadequacy of mean-field-like density functional calculations of solid molecular hydrogen in phases I, II and III and emphasize the need for more sophisticated methods.
Conjugated polymer-based organic electrochemical transistors (OECTs) are being studied for applications ranging from biochemical sensing to neural interfaces. While new conjugated polymers are being developed that can interface digital electronics with the aqueous chemistry of life, the vast majority of high-performance, high-mobility organic transistor materials developed over the past decades are extremely poor at taking up biologically-relevant ions. Here we incorporate an ion exchange gel into an OECT, demonstrating that this structure is capable of taking up biologically-relevant ions from solution and injecting larger, more hydrophobic ions into the underlying polymer semiconductor active layer in multiple hydrophobic conjugated polymers. Using poly[2,5-bis(3-tetradecylthiophen-2-yl) thieno[3,2-b]thiophene] (PBTTT) as a model semiconductor active layer and a blend of the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM TFSI) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) as the ion exchange gel, we demonstrate more than a four order of magnitude improvement in OECT device transconductance and a one hundred-fold increase in ion injection kinetics. We demonstrate the ability of the ion exchange gel OECT to record biological signals by measuring the action potentials of a Venus flytrap plant. These results show the possibility of using interface engineering to open up a wider palette of organic semiconductor materials as OECTs that can be gated by aqueous solutions.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
