Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userA Hybrid RF-VLC System for Energy Efficient Wireless Access
245
0
0.0
(
0
)
Added by
Ammar Gharaibeh
Publication date
2018
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
In this paper, we propose a new paradigm in designing and realizing energy efficient wireless indoor access networks, namely, a hybrid system enabled by traditional RF access, such as WiFi, as well as the emerging visible light communication (VLC). VLC facilitates the great advantage of being able to jointly perform illumination and communications, and little extra power beyond illumination is required to empower communications, thus rendering wireless access with almost zero power consumption. On the other hand, when illumination is not required from the light source, the energy consumed by VLC could be more than that consumed by the RF. By capitalizing on the above properties, the proposed hybrid RF-VLC system is more energy efficient and more adaptive to the illumination conditions than the individual VLC or RF systems. To demonstrate the viability of the proposed system, we first formulate the problem of minimizing the power consumption of the hybrid RF-VLC system while satisfying the users requests and maintaining acceptable level of illumination, which is NP-complete. Therefore, we divide the problem into two subproblems. In the first subproblems, we determine the set of VLC access points (AP) that needs to be turned on to satisfy the illumination requirements. Given this set, we turn our attention to satisfying the users requests for real-time communications, and we propose a randomized online algorithm that, against an oblivious adversary, achieves a competitive ratio of $log(N)log(M)$ with probability of success $1 - frac{1}{N}$, where $N$ is the number of users and $M$ is the number of VLC and RF APs. We also show that the best online algorithm to solve this problem can achieve a competitive ratio of $log(M)$. Simulation results further demonstrate the advantages of the hybrid system.
rate research
Read More
One of the limitations of wireless sensor nodes is their inherent limited energy resource. Besides maximizing the lifetime of the sensor node, it is preferable to distribute the energy dissipated throughout the wireless sensor network in order to minimize maintenance and maximize overall system performance. Any communication protocol that involves synchronization of peer nodes incurs some overhead for setting up the communication. We introduce a new algorithm, e3D (energy-efficient Distributed Dynamic Diffusion routing algorithm), and compare it to two other algorithms, namely directed, and random clustering communication. We take into account the setup costs and analyze the energy-efficiency and the useful lifetime of the system. In order to better understand the characteristics of each algorithm and how well e3D really performs, we also compare e3D with its optimum counterpart and an optimum clustering algorithm. The benefit of introducing these ideal algorithms is to show the upper bound on performance at the cost of an astronomical prohibitive synchronization costs. We compare the algorithms in terms of system lifetime, power dissipation distribution, cost of synchronization, and simplicity of the algorithm. Our simulation results show that e3D performs comparable to its optimal counterpart while having significantly less overhead.
Visible Light Communication (VLC) is based on the dual use of the illumination infrastructure for wireless data communication. The major interest on this communication technology lies on its specific features to be a secure, cost-effective wireless technology. Recently, this technology has gained an important role as potential candidate for complementing traditional RF communication systems. Anyway a major issue for the VLC development is a deep comprehension of the noise and its impact on the received signal at the receiver. In this work, we present a simple but effective approach to analyze the noise and drastically reduce it through a signal processing method. In order to validate the effectiveness of this analytical approach, we have developed an USRP-based testbed. Experimental results have been carried out by evaluating the symbol error rate (SER) and show the effectiveness of the noise mitigation approach in different interference conditions and at different distance between the transmitter and the receiver.
Ambient backscatter has been introduced with a wide range of applications for low power wireless communications. In this article, we propose an optimal and low-complexity dynamic spectrum access framework for RF-powered ambient backscatter system. In this system, the secondary transmitter not only harvests energy from ambient signals (from incumbent users), but also backscatters these signals to its receiver for data transmission. Under the dynamics of the ambient signals, we first adopt the Markov decision process (MDP) framework to obtain the optimal policy for the secondary transmitter, aiming to maximize the system throughput. However, the MDP-based optimization requires complete knowledge of environment parameters, e.g., the probability of a channel to be idle and the probability of a successful packet transmission, that may not be practical to obtain. To cope with such incomplete knowledge of the environment, we develop a low-complexity online reinforcement learning algorithm that allows the secondary transmitter to learn from its decisions and then attain the optimal policy. Simulation results show that the proposed learning algorithm not only efficiently deals with the dynamics of the environment, but also improves the average throughput up to 50% and reduces the blocking probability and delay up to 80% compared with conventional methods.
Wireless Sensor Networks (WSNs) consist of large number of randomly deployed energy constrained sensor nodes. Sensor nodes have ability to sense and send sensed data to Base Station (BS). Sensing as well as transmitting data towards BS require high energy. In WSNs, saving energy and extending network lifetime are great challenges. Clustering is a key technique used to optimize energy consumption in WSNs. In this paper, we propose a novel clustering based routing technique: Enhanced Developed Distributed Energy Efficient Clustering scheme (EDDEEC) for heterogeneous WSNs. Our technique is based on changing dynamically and with more efficiency the Cluster Head (CH) election probability. Simulation results show that our proposed protocol achieves longer lifetime, stability period and more effective messages to BS than Distributed Energy Efficient Clustering (DEEC), Developed DEEC (DDEEC) and Enhanced DEEC (EDEEC) in heterogeneous environments.
We show that compact fully connected (FC) deep learning networks trained to classify wireless protocols using a hierarchy of multiple denoising autoencoders (AEs) outperform reference FC networks trained in a typical way, i.e., with a stochastic gradient based optimization of a given FC architecture. Not only is the complexity of such FC network, measured in number of trainable parameters and scalar multiplications, much lower than the reference FC and residual models, its accuracy also outperforms both models for nearly all tested SNR values (0 dB to 50dB). Such AE-trained networks are suited for in-situ protocol inference performed by simple mobile devices based on noisy signal measurements. Training is based on the data transmitted by real devices, and collected in a controlled environment, and systematically augmented by a policy-based data synthesis process by adding to the signal any subset of impairments commonly seen in a wireless receiver.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
