Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userHigh sensitivity refractive index sensor based on the semicircular bent fiber
73
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
A refractive index sensor based on a semicircular bent fiber is presented. The interference occurs between the cladding mode excited in the bending region and the core mode. Both the theoretical and experimental results show that the resonant dip wavelength decreases linearly with the increase of the refractive index of the surrounding environment. A high sensitivity of 1031 nm per refractive index unit is obtained over the refractive index range of 1.3324 to 1.3435 by using a bent fiber with a bending radius of 500 {mu}m.
rate research
Read More
The use of relatively simple structures to achieve high performance refractive index sensors has always been urgently needed. In this work, we propose a lithography-free sensing platform based on metal-dielectric cavity, the sensitivity of our device can reach 1456700 nm/RIU for solution and 1596700 nm/RIU for solid material, and the FOM can be up to 1234500 /RIU for solution and 1900800 /RIU for solid material, which both are much higher than most sensing methods. This sensor has excellent sensing performance in both TE and TM light, and suitable for integrated microfluidic channels. Our scheme uses a multi-layers structure with a 10 nm gold film sandwiched between prism and analyte, and shows a great potential for low-cost sensing with high performance.
A highly sensitive refractive index sensor based on grating-assisted strip waveguide directional coupler is proposed. The sensor is designed using two coupled asymmetric strip waveguides with a top-loaded grating structure in one of the waveguides. Maximum light couples from one waveguide to the other at the resonance wavelength, and the change in resonance wavelength with the change in refractive index of the medium in the cover region is a measure of the sensitivity. The proposed sensor would be an on-chip device with a high refractive index sensitivity of ~ 104 nm/RIU, and negligible temperature sensitivity (< 1nm/0C). The sensor configuration offers a low propagation loss, thereby enhancing the sensitivity. Variation of the sensitivity with the waveguide parameters of the proposed sensor have been studied to optimize the design.
We present a proof-of-concept experiment aimed at increasing the sensitivity of temperature sensors implemented with Fiber Bragg gratings by making use of a weak value amplification scheme. The technique requires only linear optics elements for its implementation, and appears as a promising method for extending the range of temperatures changes detectable to increasingly lower values than state-of the-art sensors can currently provide. The device implemented here is able to generate a shift of the centroid of the spectrum of a pulse of $mathrm{sim 0.035,nm/^{circ}C}$, a nearly fourfold increase in sensitivity over the same Fiber Bragg Grating system interrogated using standard methods.
Light confinement and amplification in micro- & nano-fiber have been intensively studied and a number of applications have been developed. However, the typical micro- & anno- fibers are usually free-standing or positioned on a substrate with lower refractive index to ensure the light confinement and guiding mode. Here we numerically and experimentally demonstrate the possibility of confining light within a microfiber on a high refractive index substrate. In contrast to the strong leaky to the substrate, we found that the radiation loss was dependent on the radius of microfiber and the refractive index contrast. Consequently, quasi-guiding modes could be formed and the light could propagate and be amplified in such systems. By fabricating tapered silica fiber and dye-doped polymer fiber and placing them on sapphire substrates, the light propagation, amplification, and laser behaviors have been experimentally studied to verify the quasi-guiding modes in microfer with higher index substrate. We believe that our research will be essential for the applications of micro- and nano-fibers.
Which systems are ideal to obtain negative refraction with no absorption? Electromagnetically induced transparency (EIT) is a method to suppress absorption and make a material transparent to a field of a given frequency. Such a system has been discussed in [1]; however the main limitations for negative refraction introduced are the necessity of resonant electric and magnetic dipole transitions, and the necessity of very dense media. We suggest using frequency translators in a composite system that would provide negative refraction for a range of optical frequencies while attempting to overcome the limitations discussed above. In the process of using frequency translators, we also find composite systems that can be used for refractive index enhancement.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
