Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userVapor-Liquid-Solid Growth of Monolayer MoS2 Nanoribbons
88
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Chemical vapor deposition (CVD) of two-dimensional (2D) materials such as monolayer MoS2 typically involves the conversion of vapor-phase precursors to a solid product in a process that may be described as a vapor-solid-solid (VSS) mode. Here, we report the first demonstration of vapor-liquid-solid (VLS) growth of monolayer MoS2 yielding highly crystalline ribbon-shaped structures with a width of a few tens of nanometers to a few micrometers. The VLS growth mode is triggered by the reaction between molybdenum oxide and sodium chloride, which results in the formation of molten Na-Mo-O droplets. These droplets mediate the growth of MoS2 ribbons in the crawling mode when saturated with sulfur on a crystalline substrate. Our growth yields straight and kinked ribbons with a locally well-defined orientation, reflecting the regular horizontal motion of the liquid droplets during growth. Using atomic-resolution scanning transmission electron microscopy (STEM) and second harmonic generation (SHG) microscopy, we show that the ribbons are homoepitaxially on monolayer MoS2 surface with predominantly 2H- or 3R-type stacking. These findings pave the way to novel devices with structures of mixed dimensionalities.
rate research
Read More
Vapor transportation is the core process in growing transition-metal dichalcogenides (TMDCs) by chemical vapor deposition (CVD). One inevitable problem is the spatial inhomogeneity of the vapors. The non-stoichiometric supply of transition-metal precursors and chalcogen leads to poor control in products location, morphology, crystallinity, uniformity and batch to batch reproducibility. While vapor-liquid-solid (VLS) growth involves molten precursors at the growth temperatures higher than their melting points. The liquid sodium molybdate can precipitate solid MoS2 monolayers when saturated with sulfur vapor. Taking advantage of the VLS growth, we achieved three kinds of important achievements: (a) 4-inch-wafer-scale uniform growth of MoS2 flakes on SiO2/Si substrates, (b) 2-inch-wafer-scale growth of continuous MoS2 film with a grain size exceeding 100 um on sapphire substrates, and (c) pattern (site-controlled) growth of MoS2 flakes and film. We clarified that the VLS growth thus pave the new way for the high-efficient, scalable synthesis of two-dimensional TMDC monolayers.
Monolayer molybdenum disulphide (MoS$_2$) is a promising two-dimensional (2D) material for nanoelectronic and optoelectronic applications. The large-area growth of MoS$_2$ has been demonstrated using chemical vapor deposition (CVD) in a wide range of deposition temperatures from 600 {deg}C to 1000 {deg}C. However, a direct comparison of growth parameters and resulting material properties has not been made so far. Here, we present a systematic experimental and theoretical investigation of optical properties of monolayer MoS$_2$ grown at different temperatures. Micro-Raman and photoluminescence (PL) studies reveal observable inhomogeneities in optical properties of the as-grown single crystalline grains of MoS$_2$. Close examination of the Raman and PL features clearly indicate that growth-induced strain is the main source of distinct optical properties. We carry out density functional theory calculations to describe the interaction of growing MoS$_2$ layers with the growth substrate as the origin of strain. Our work explains the variation of band gap energies of CVD-grown monolayer MoS$_2$, extracted using PL spectroscopy, as a function of deposition temperature. The methodology has general applicability to model and predict the influence of growth conditions on strain in 2D materials.
Recently, monolayer SnS, a two-dimensional group IV monochalcogenide, was grown on a mica substrate at the micrometer-size scale by the simple physical vapor deposition (PVD), resulting in the successful demonstration of its in-plane room temperature ferroelectricity. However, the reason behind the monolayer growth remains unclear because it had been considered that the SnS growth inevitably results in a multilayer thickness due to the strong interlayer interaction arising from lone pair electrons. Here, we investigate the PVD growth of monolayer SnS from two different feed powders, highly purified SnS and commercial phase-impure SnS. Contrary to expectations, it is suggested that the mica substrate surface is modified by sulfur evaporated from the Sn2S3 contaminant in the as-purchased powder and the lateral growth of monolayer SnS is facilitated due to the enhanced surface diffusion of SnS precursor molecules, unlike the growth from the highly purified powder. This insight provides a guide to identify further controllable growth conditions.
Monolayers of transition metal dichalcogenides (TMDCs) are atomically thin direct-gap semiconductors with potential applications in nanoelectronics, optoelectronics, and electrochemical sensing. Recent theoretical and experimental efforts suggest that they are ideal systems for exploiting the valley degrees of freedom of Bloch electrons. For example, Dirac valley polarization has been demonstrated in mechanically exfoliated monolayer MoS2 samples by polarization-resolved photoluminescence, although polarization has rarely been seen at room temperature. Here we report a new method for synthesizing high optical quality monolayer MoS2 single crystals up to 25 microns in size on a variety of standard insulating substrates (SiO2, sapphire and glass) using a catalyst-free vapor-solid growth mechanism. The technique is simple and reliable, and the optical quality of the crystals is extremely high, as demonstrated by the fact that the valley polarization approaches unity at 30 K and persists at 35% even at room temperature, suggesting a virtual absence of defects. This will allow greatly improved optoelectronic TMDC monolayer devices to be fabricated and studied routinely.
A phase-field crystal model based on the density-field approach incorporating high-order interparticle direct correlations is developed to study vapor-liquid-solid coexistence and transitions within a single continuum description. Conditions for the realization of the phase coexistence and transition sequence are systematically analyzed and shown to be satisfied by a broad range of model parameters, demonstrating the high flexibility and applicability of the model. Both temperature-density and temperature-pressure phase diagrams are identified, while structural evolution and coexistence among the three phases are examined through dynamical simulations. The model is also able to produce some temperature and pressure related material properties, including effects of thermal expansion and pressure on equilibrium lattice spacing, and temperature dependence of saturation vapor pressure. This model can be used as an effective approach for investigating a variety of material growth and deposition processes based on vapor-solid, liquid-solid, and vapor-liquid-solid growth.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
