Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userOn the performance of large monolithic LaCl3(Ce) crystals coupled to pixelated silicon photosensors
69
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We investigate the performance of large area radiation detectors, with high energy- and spatial-resolution, intended for the development of a Total Energy Detector with gamma-ray imaging capability, so-called i-TED. This new development aims for an enhancement in detection sensitivity in time-of-flight neutron capture measurements, versus the commonly used C6D6 liquid scintillation total-energy detectors. In this work, we study in detail the impact of the readout photosensor on the energy response of large area (5050 mm2) monolithic LaCl3(Ce) crystals, in particular when replacing a conventional mono-cathode photomultiplier tube by an 88 pixelated silicon photomultiplier. Using the largest commercially available monolithic SiPM array (25 cm2), with a pixel size of 66 mm2, we have measured an average energy resolution of 3.92% FWHM at 662 keV for crystal thicknesses of 10, 20 and 30 mm. The results are confronted with detailed Monte Carlo (MC) calculations, where both optical processes and properties have been included for the reliable tracking of the scintillation photons. After the experimental validation of the MC model, se use our MC code to explore the impact of different a photosensor segmentation (pixel size and granularity) on the energy resolution. Our optical MC simulations predict only a marginal deterioration of the spectroscopic performance for pixels of 33 mm2.
rate research
Read More
The Lanthanum Halide scintillator detectors have been widely used for nuclear spectroscopy experiments because of their excellent energy and time resolutions. Despite having these advantages, the intrinsic alpha and beta contaminations in these scintillators pose a severe limitation in their usage in rare-event detections. In the present work, pulse shape discrimination (PSD) with a fast digitizer has been shown to be an efficient method to separate the effect of alpha contamination from the spectrum. The shape of the beta spectrum has been generated with the help of Monte Carlo based simulation code, and its contribution has been eliminated from the spectrum. The reduction in the background events generated by both intrinsic beta and alpha activities has been demonstrated. The present study will encourage the application of these detectors in low cross-section measurement experiments relevant to nuclear astrophysics.
We report the long term performance of the photosensors, 143 one-inch R8520-406 and 37 three-inch R11410-MOD photomultipliers from Hamamatsu, in the first phase of the PandaX dual-phase xenon dark matter experiment. This is the first time that a significant number of R11410 photomultiplier tubes were operated in liquid xenon for an extended period, providing important guidance to the future large xenon-based dark matter experiments.
Silicon photomultipliers (SiPMs) are potential solid-state alternatives to traditional photomultiplier tubes (PMTs) for single-photon detection. In this paper, we report on evaluating SensL MicroFC-10035-SMT SiPMs for their suitability as PMT replacements. The devices were successfully operated in a liquid-xenon detector, which demonstrates that SiPMs can be used in noble element time projection chambers as photosensors. The devices were also cooled down to 170 K to observe dark count dependence on temperature. No dependencies on the direction of an applied 3.2 kV/cm electric field were observed with respect to dark-count rate, gain, or photon detection efficiency.
We have developed a neutron imaging sensor based on an INTPIX4-SOI pixelated silicon device. Neutron irradiation tests are performed at several neutron facilities to investigate sensors responses for neutrons. Detection efficiency is measured to be around $1.5$% for thermal neutrons. Upper bound of spatial resolution is evaluated to be $4.1 pm 0.2 ~mu$m in terms of a standard deviation of the line spread function.
As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
