Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userProperties of polycrystalline nanoparticles with uniaxial and cubic types of magnetic anisotropy of individual grains
118
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The influence of the crystal structure inhomogeneities on the magnetic properties of cobalt nanoparticles with different aspect ratio and spherical nanoparticles of chromium dioxide, cobalt ferrite and magnetite has been studied by means of numerical simulation. The polycrystalline nanoparticles are modeled by means of subdivision of the nanoparticle volume into tightly bound single-crystal granules with randomly distributed directions of the easy anisotropy axes. The probability of appearance of quasi uniform and vortex states in sufficiently large assemblies of polycrystalline nanoparticles of various types have been calculated depending on the nanoparticle diameter. It is shown that the subdivision of a nanoparticle into single-crystal granules with different orientations of the easy anisotropy axes substantially reduces the effective single-domain diameters for particles with uniaxial type of anisotropy of individual granules. However, for particles with cubic type of magnetic anisotropy the influence of the crystal structure inhomogeneities on the equilibrium properties of the particles is not so important even for magnetically hard cobalt ferrite nanoparticles. It is practically absent for magnetically soft magnetite nanoparticles.
rate research
Read More
This paper reports on magnetometry and magnetoresistance measurements of MnSi epilayers performed in out-of-plane magnetic fields. We present a theoretical analysis of the chiral modulations that arise in confined cubic helimagnets where the uniaxial anisotropy axis and magnetic field are both out-of-plane. In contrast to in-plane field measurements (Wilson et al., Phys. Rev. B 86, 144420 (2012)), the hard-axis uniaxial anisotropy in MnSi/Si(111) increases the energy of (111)-oriented skyrmions and in-plane helicoids relative to the cone phase, and makes the cone phase the only stable magnetic texture below the saturation field. While induced uniaxial anisotropy is important in stabilizing skyrmion lattices and helicoids in other confined cubic helimagnets, the particular anisotropy in MnSi/Si(111) entirely suppresses these states in an out-of-plane magnetic field. However, it is predicted that isolated skyrmions with enlarged sizes exist in MnSi/Si(111) epilayers in a broad range of out-of-plane magnetic fields.
Interest in creating magnetic metamaterials has led to methods for growing superstructures of magnetic nanoparticles. Mesoscopic crystals of maghemite ($gammatext{-Fe}_2text{O}_3$) nanoparticles can be arranged into highly ordered body-centered tetragonal lattices of up to a few micrometers. Although measurements on disordered ensembles have been carried out, determining the magnetic properties of individual mesoscopic crystals is challenging due to their small total magnetic moment. Here, we overcome these challenges by utilizing sensitive dynamic cantilever magnetometry to study individual micrometer-sized $gammatext{-Fe}_2text{O}_3$ mesocrystals. These measurements reveal an unambiguous cubic anisotropy, resulting from the crystalline anisotropy of the constituent maghemite nanoparticles and their alignment within the mesoscopic lattice. The signatures of anisotropy and its orgins come to light because we combine the self-assembly of highly ordered mesocrystals with the ability to resolve their individual magnetism. This combination is promising for future studies of the magnetic anisotropy of other nanoparticles, which are too small to investigate individually.
Homogeneous single phase GdCrO3 nanoparticles are synthesized by a modified-hydrothermal synthesis. The sample shows a compensation temperature at 128 K, below which the DC magnetization becomes negative and positive at low temperatures due to the competition between the two sublattice magnetization. At Neel temperature (168K), the line width and the intensity show an abrupt transition, revealed from electron paramagnetic resonance spectroscopy.
Magnetic nanoparticles (NP) of magnetite (Fe3O4) coated with oleic acid (OA) and dodecanoic acid (DA) were synthesized and investigated through Transmission Electron Microscopy (TEM),magnetization M, and ac magnetic susceptibility measurements. The OA coated samples were produced with different magnetic concentrations (78, 76, and 65%) and the DA sample with 63% of Fe3O4. Images from TEM indicate that the NP have a nearly spherical geometry and mean diameter ~ 5.5 nm. Magnetization measurements, performed in zero field cooled (ZFC) and field cooled (FC) processes under different external magnetic fields H, exhibited a maximum at a given temperature TB in the ZFC curves, which depends on the NP coating (OA or DA), magnetite concentration, and H. The temperature TB decreases monotonically with increasing H and, for a given H, the increase in the magnetite concentration results in an increase of TB. The observed behavior is related to the dipolar interaction (DI) between NP which seems to be an important mechanism in all samples studied. This is supported by the results of the ac magnetic susceptibility Xac measurements, where the temperature in which X peaks for different frequencies follows the Vogel-Fulcher model, a feature commonly found in systems with dipolar interactions. Curves of H vs. TB/TB(H=0) for samples with different coatings and magnetite concentrations collapse into a universal curve, indicating that the qualitative magnetic behavior of the samples may be described by the NP themselves, instead of the coating or the strength of the dipolar interaction. Below TB, M vs. H curves show a coercive field (HC) that increases monotonically with decreasing temperature. The saturation magnetization (MS) follows the Blochs law and values of MS at room temperature as high as 78 emu/g were estimated, a result corresponding to ~80% of the bulk value. The overlap of M/MS vs. H/T curves for a given sample and the low HC at high temperatures suggest superparamagnetic behavior in all samples studied. The overlap of M/MS vs. H curves at constant temperature for different samples indicates that the NP magnetization behavior is preserved, independently of the coating and magnetite concentration.
Electrical resistivity rho, magnetic susceptibility chi, magnetization M and specific heat measurements are reported on a singlecrystalline sample of CePd5Al2, showing successive antiferromagnetic orderings at T_N1=4.1 K and T_N2=2.9 K. The temperature dependence of T_N1 shows a Kondo metal behavior with large anisotropy, rho_c/rho_a=3.2 at 20 K, and opening of a superzone gap along the tetragona c-direction below T_N1. Both T_N1 and T_N2 gradually increase with applying pressure up to 2.5 GPa. The data of chi(T) and M(B) in the paramagnetic state were analyzed using a crystalline electric field (CEF) model. It led to a Kramers doublet ground state with wave functions consisting primarily of |+-5/2>, whose energy level is isolated from the excited states by 230 and 300 K. This CEF effect gives rise to the large anisotropy in the paramagnetic state. In the ordered state, the uniaxial magnetic anisotropy is manifested as M_c/M_a=20 in B=5 T and at 1.9 K, and chi_c/chi_a=25 in B=0.1 T and at 4 K. This huge uniaxial magnetic anisotropy in the antiferromagnetic states can be interpreted in terms of isotropic magnetic interaction among the Ce^{3+} moments governed by the strong CEF. In powder neutron diffraction experiments, magnetic reflections were observed owing to the antiferromagnetic ordered states below T_N1, however, no additional reflection was found below T_N2.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
