Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMechanical oscillations in lasing microspheres
348
0
0.0
(
0
)
Added by
Daniel Navarro Urrios
Publication date
2017
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
We investigate the feasibility of activating coherent mechanical oscillations in lasing microspheres by modulating the laser emission at a mechanical eigenfrequency. To this aim, 1.5% Nd3+:Barium-Titanium-Silicate microspheres with diameters around 50 {mu}m were used as high quality factor (Q>10^6) whispering gallery mode lasing cavities. We have implemented a pump-and-probe technique in which the pump laser used to excite the Nd3+ ions is focused on a single microsphere with a microscope objective and a probe laser excites a specific optical mode with the evanescent field of a tapered fibre. The studied microspheres show monomode and multi-mode lasing action, which can be modulated in the best case up to 10 MHz. We have optically transduced thermally-activated mechanical eigenmodes appearing in the 50-70 MHz range, the frequency of which decreases with increasing the size of the microspheres. In a pump-and-probe configuration we observed modulation of the probe signal up to the maximum pump modulation frequency of our experimental setup, i.e., 20 MHz. This modulation decreases with frequency and is unrelated to lasing emission, pump scattering or thermal effects. We associate this effect to free-carrier-dispersion induced by multiphoton pump light absorption. On the other hand, we conclude that, in our current experimental conditions, it was not possible to resonantly excite the mechanical modes. Finally, we discuss on how to overcome these limitations by increasing the modulation frequency of the lasing emission and decreasing the frequency of the mechanical eigenmodes displaying a strong degree of optomechanical coupling.
rate research
Read More
We reveal the existence of optical super-resonance modes supported by dielectric microspheres. These modes,with field-intensity enhancement factors on the order of 10^4-10^5, can be directly obtained from analytical calculations. In contrast to usual optical resonances, which are related to the poles of the electric and magnetic scattering amplitudes, super-resonance modes are related to the poles of the internal field coefficients, obtained for specific values of the size parameter. We also reveal the connection of these super-resonances in the generation of magnetic nanojets and of giant magnetic fields in particles with high refractive index.
The diffraction limit is a fundamental barrier in optical microscopy, which restricts the smallest resolvable feature size of a microscopic system. Microsphere-based microscopy has proven to be a promosing tool for challenging the diffraction limit. Nevertheless, the microspheres have a low imaging contrast in the air, which hinders the application of this technique. In this Letter, we demonstrate that this challenge can be effectively overcome by using partially Ag-plated microspheres. The deposited Ag film acts as an aperture stop that blocks a portion of the incident beam, forming a photonic hook with oblique near-field illumination. Such a photonic hook significantly enhanced imaging contrast, as experimentally verified by imaging Blu-ray disc surface and silica particle arrays.
We report on lasing at visible wavelengths in arrays of ferromagnetic Ni nanodisks overlaid with an organic gain medium. We demonstrate that by placing an organic gain material within the mode volume of the plasmonic nanoparticles both the radiative and, in particular, the high ohmic losses of Ni nanodisk resonances can be compensated. Under increasing pump fluence, the systems exhibit a transition from lattice-modified spontaneous emission to lasing, the latter being characterized by highly directional and sub-nanometer linewidth emission. By breaking the symmetry of the array, we observe tunable multimode lasing at two wavelengths corresponding to the particle periodicity along the two principal directions of the lattice. Our results pave the way for loss-compensated magnetoplasmonic devices and topological photonics.
Silicon photonics in the near-Infra-Red, up to 1.6 um, is already one of key technologies in optical data communications, particularly short-range. It is also being prospected for applications in quantum computing, artificial intelligence, optical signal processing, where complex photonic integration is to be combined with large-volume fabrication. However, silicon photonics does not yet cover a large portion of applications in the mid-IR. In the 2 to 5 um wavelength range, environmental sensing, life sensing, and security all rely on optical signatures of molecular vibrations to identify complex individual chemical species. The markets for such analysis are huge and constantly growing, with a push for sensitivity, specificity, compactness, low-power operation and low cost. An all-group-IV, CMOS-compatible mid-IR integrated photonic platform would be a key enabler in this wavelength range. As for other wavelengths, such a platform should be complete with low-loss guided interconnects, detectors, modulators, eventually, and most importantly efficient and integrated light sources. This chapter reviews recent developments in the fields of mid-IR silicon-compatible optically and electrically pumped lasers, light emitting diodes and photodetectors based on Ge, GeSn and SiGeSn alloys. It contains insights into the fundamentals of these developments, including band structure modelling, material growth and processing techniques.
Propagation of light in a highly scattering medium is among the most fascinating optical effect that everyone experiences on an everyday basis and possesses a number of fundamental problems which have yet to be solved. Conventional wisdom suggests that non-linear effects do not play a significant role because the diffusive nature of scattering acts to spread the intensity, dramatically weakening these effects. We demonstrate the first experimental evidence of lasing on a Raman transition in a bulk three-dimensional random media. From a practical standpoint, Raman transitions allow for spectroscopic analysis of the chemical makeup of the sample. A random Raman laser could serve as a bright Raman source allowing for remote, chemically specific, identification of powders and aerosols. Fundamentally, the first demonstration of this new light source opens up an entire new field of study into non-linear light propagation in turbid media, with the most notable application related to non-invasive biomedical imaging.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
