Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userReference-Free Single-Point Holographic Imaging and Realization of an Optical Bidirectional Transducer
172
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
One of the fundamental limitations in photonics is the lack of a bidirectional transducer that can convert optical information into electronic signals or vice versa. In acoustics or at microwave frequencies, wave signals can be simultaneously measured and modulated by a single transducer. In optics, however, optical fields are generally measured via reference-based interferometry or holography using silicone-based image sensors, whereas they are modulated using spatial light modulators. Here, we propose a scheme for an optical bidirectional transducer using a spatial light modulator. By exploiting the principle of time-reversal symmetry of light scattering, two-dimensional reference-free measurement and modulation of optical fields are realized. We experimentally demonstrate the optical bidirectional transducer for optical information consisting of 128 x 128 spatial modes at visible and short-wave infrared wavelengths.
rate research
Read More
We propose and experimentally demonstrate a method of polarization-sensitive quantitative phase imaging using two photo detectors. Instead of recording wide-field interference patterns, finding the modulation patterns maximizing focused intensities in terms of the polarization states enables polarization-dependent quantitative phase imaging without the need for a reference beam and an image sensor. The feasibility of the present method is experimentally validated by reconstructing Jones matrices of various samples including a polystyrene microsphere, a maize starch granule, and a rat retinal nerve fiber layer. Since the present method is simple and sufficiently general, we expect that it may offer solutions for quantitative phase imaging of birefringent materials.
Using conventional refraction-based optical lens, it is challenging to achieve both high-resolution imaging and long-working-distance condition. To increase the numerical aperture of a lens, the working distance should be compensated, and vice versa. Here we propose and demonstrate a new concept in optical microscopy that can achieve both high-resolution imaging and long-working-distance conditions by utilising a scattering layer instead of refractive optics. When light passes through a scattering layer, it creates a unique interference pattern. To retrieve the complex amplitude image from the interference pattern without introducing a reference beam, we utilised a speckle-correlation scattering matrix method. This property enables holographic microscopy without any lens or external reference beam. Importantly, the proposed method allows high-resolution imaging with a long working distance beyond what a conventional objective lens can achieve. As an experimental verification, we imaged various microscopic samples and compared their performance with off-axis digital holographic microscopy.
Ultrathin lensless fibre endoscopes offer minimally invasive investigation, but they mostly operate as a rigid type due to the need for prior calibration of a fibre probe. Furthermore, most implementations work in fluorescence mode rather than label-free imaging mode, making them unsuitable for medicine and industry. Herein, we report a fully flexible ultrathin fibre endoscope taking 3D holographic images of unstained tissues with 0.87-{mu}m spatial resolution. Using a bare fibre bundle as thin as 200-{mu}m diameter, we design a lensless Fourier holographic imaging configuration to selectively detect weak reflections from biological tissues, a critical step for stain-free reflectance imaging. A unique algorithm is developed for calibration-free holographic image reconstruction, allowing us to image through a narrow and curved passage regardless of fibre bending. We demonstrate endoscopic reflectance imaging of unstained rat intestine tissues that are completely invisible to conventional endoscopes. The proposed endoscope will expedite more accurate and earlier diagnosis than before with minimal complications.
Optical clocks are not only powerful tools for prime fundamental research, but are also deemed for the re-definition of the SI base unit second as they now surpass the performance of caesium atomic clocks in both accuracy and stability by more than an order of magnitude. However, an important obstacle in this transition has so far been the limited reliability of the optical clocks that made a continuous realization of a timescale impractical. In this paper, we demonstrate how this situation can be resolved and that a timescale based on an optical clock can be established that is superior to one based on even the best caesium fountain clocks. The paper also gives further proof of the international consistency of strontium lattice clocks on the $10^{-16}$ accuracy level, which is another prerequisite for a change in the definition of the second.
Low-loss transmission and sensitive recovery of weak radio-frequency (rf) and microwave signals is an ubiquitous technological challenge, crucial in fields as diverse as radio astronomy, medical imaging, navigation and communication, including those of quantum states. Efficient upconversion of rf-signals to an optical carrier would allow transmitting them via optical fibers dramatically reducing losses, and give access to the mature toolbox of quantum optical techniques, routinely enabling quantum-limited signal detection. Research in the field of cavity optomechanics has shown that nanomechanical oscillators can couple very strongly to either microwave or optical fields. An oscillator accommodating both functionalities would bear great promise as the intermediate platform in a radio-to-optical transduction cascade. Here, we demonstrate such an opto-electro-mechanical transducer utilizing a high-Q nanomembrane. A moderate voltage bias (<10V) is sufficient to induce strong coupling between the voltage fluctuations in a rf resonance circuit and the membranes displacement, which is simultaneously coupled to light reflected off its metallized surface. The circuit acts as an antenna; the voltage signals it induces are detected as an optical phase shift with quantum-limited sensitivity. The half-wave voltage is in the microvolt range, orders of magnitude below that of standard optical modulators. The noise added by the membrane is suppressed by the electro-mechanical cooperativity C~6800 and has a temperature of 40mK, far below 300K where the entire device is operated. This corresponds to a sensitivity limit as low as 5 pV/Hz^1/2, or -210dBm/Hz in a narrow band around 1 MHz. Our work introduces an entirely new approach to all-optical, ultralow-noise detection of classical electronic signals, and sets the stage for coherent upconversion of low-frequency quantum signals to the optical domain.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
