Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAdvanced reduced-order models for moisture diffusion in porous media
126
0
0.0
(
0
)
Authors
Suelen Gasparin
Ask ChatGPT about the research
No Arabic abstract
It is of great concern to produce numerically efficient methods for moisture diffusion through porous media, capable of accurately calculate moisture distribution with a reduced computational effort. In this way, model reduction methods are promising approaches to bring a solution to this issue since they do not degrade the physical model and provide a significant reduction of computational cost. Therefore, this article explores in details the capabilities of two model-reduction techniques - the Spectral Reduced-Order Model (Spectral-ROM) and the Proper Generalised Decomposition (PGD) - to numerically solve moisture diffusive transfer through porous materials. Both approaches are applied to three different problems to provide clear examples of the construction and use of these reduced-order models. The methodology of both approaches is explained extensively so that the article can be used as a numerical benchmark by anyone interested in building a reduced-order model for diffusion problems in porous materials. Linear and non-linear unsteady behaviors of unidimensional moisture diffusion are investigated. The last case focuses on solving a parametric problem in which the solution depends on space, time and the diffusivity properties. Results have highlighted that both methods provide accurate solutions and enable to reduce significantly the order of the model around ten times lower than the large original model. It also allows an efficient computation of the physical phenomena with an error lower than 10^{-2} when compared to a reference solution.
rate research
Read More
This paper proposes the use of a Spectral method to simulate diffusive moisture transfer through porous materials as a Reduced-Order Model (ROM). The Spectral approach is an a priori method assuming a separated representation of the solution. The method is compared with both classical Euler implicit and Crank-Nicolson schemes, considered as large original models. Their performance - in terms of accuracy, complexity reduction and CPU time reduction - are discussed for linear and nonlinear cases of moisture diffusive transfer through single and multi-layered one-dimensional domains, considering highly moisture-dependent properties. Results show that the Spectral reduced-order model approach enables to simulate accurately the field of interest. Furthermore, numerical gains become particularly interesting for nonlinear cases since the proposed method can drastically reduce the computer run time, by a factor of 100, when compared to the traditional Crank-Nicolson scheme for one-dimensional applications.
Accurate numerical simulations of interaction between fluid and solid play an important role in applications. The task is challenging in practical scenarios as the media are usually highly heterogeneous with very large contrast. To overcome this computational challenge, various multiscale methods are developed. In this paper, we consider a class of linear poroelasticity problems in high contrast heterogeneous porous media, and develop a mixed generalized multiscale finite element method (GMsFEM) to obtain a fast computational method. Our aim is to develop a multiscale method that is robust with respect to the heterogeneities and contrast of the media, and gives a mass conservative fluid velocity field. We will construct decoupled multiscale basis functions for the elastic displacement as well as fluid velocity. Our multiscale basis functions are local. The construction is based on some suitable choices of local snapshot spaces and local spectral decomposition, with the goal of extracting dominant modes of the solutions. For the pressure, we will use piecewise constant approximation. We will present several numerical examples to illustrate the performance of our method. Our results indicate that the proposed method is able to give accurate numerical solutions with a small degree of freedoms.
Multispecies contaminant transport in the Earths subsurface is commonly modelled using advection-dispersion equations coupled via first-order reactions. Analytical and semi-analytical solutions for such problems are highly sought after but currently limited to either one species, homogeneous media, certain reaction networks, specific boundary conditions or a combination thereof. In this paper, we develop a semi-analytical solution for the case of a heterogeneous layered medium and a general first-order reaction network. Our approach combines a transformation method to decouple the multispecies equations with a recently developed semi-analytical solution for the single-species advection-dispersion-reaction equation in layered media. The generalized solution is valid for arbitrary numbers of species and layers, general Robin-type conditions at the inlet and outlet and accommodates both distinct retardation factors across layers or distinct retardation factors across species. Four test cases are presented to demonstrate the solution approach with the reported results in agreement with previously published results and numerical results obtained via finite volume discretisation. MATLAB code implementing the generalized semi-analytical solution is made available.
We analyse a PDE system modelling poromechanical processes (formulated in mixed form using the solid deformation, fluid pressure, and total pressure) interacting with diffusing and reacting solutes in the medium. We investigate the well-posedness of the nonlinear set of equations using fixed-point theory, Fredholms alternative, a priori estimates, and compactness arguments. We also propose a mixed finite element method and rigorously demonstrate the stability of the scheme. Error estimates are derived in suitable norms, and numerical experiments are conducted to illustrate the mechano-chemical coupling and to verify the theoretical rates of convergence.
We study several iterative methods for fully coupled flow and reactive transport in porous media. The resulting mathematical model is a coupled, nonlinear evolution system. The flow model component builds on the Richards equation, modified to incorporate nonstandard effects like dynamic capillarity and hysteresis, and a reactive transport equation for the solute. The two model components are strongly coupled. On one hand, the flow affects the concentration of the solute; on the other hand, the surface tension is a function of the solute, which impacts the capillary pressure and, consequently, the flow. After applying an Euler implicit scheme, we consider a set of iterative linearization schemes to solve the resulting nonlinear equations, including both monolithic and two splitting strategies. The latter include a canonical nonlinear splitting and an alternate linearized splitting, which appears to be overall faster in terms of numbers of iterations, based on our numerical studies. The (time discrete) system being nonlinear, we investigate different linearization methods. We consider the linearly convergent L-scheme, which converges unconditionally, and the Newton method, converging quadratically but subject to restrictions on the initial guess. Whenever hysteresis effects are included, the Newton method fails to converge. The L-scheme converges; nevertheless, it may require many iterations. This aspect is improved by using the Anderson acceleration. A thorough comparison of the different solving strategies is presented in five numerical examples, implemented in MRST, a toolbox based on MATLAB.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
