Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userScaling Deep Learning-based Decoding of Polar Codes via Partitioning
80
0
0.0
(
0
)
Added by
Sebastian Cammerer
Publication date
2017
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
The training complexity of deep learning-based channel decoders scales exponentially with the codebook size and therefore with the number of information bits. Thus, neural network decoding (NND) is currently only feasible for very short block lengths. In this work, we show that the conventional iterative decoding algorithm for polar codes can be enhanced when sub-blocks of the decoder are replaced by neural network (NN) based components. Thus, we partition the encoding graph into smaller sub-blocks and train them individually, closely approaching maximum a posteriori (MAP) performance per sub-block. These blocks are then connected via the remaining conventional belief propagation decoding stage(s). The resulting decoding algorithm is non-iterative and inherently enables a high-level of parallelization, while showing a competitive bit error rate (BER) performance. We examine the degradation through partitioning and compare the resulting decoder to state-of-the-art polar decoders such as successive cancellation list and belief propagation decoding.
rate research
Read More
A deep-learning-aided successive-cancellation list (DL-SCL) decoding algorithm for polar codes is introduced with deep-learning-aided successive-cancellation (DL-SC) decoding being a specific case of it. The DL-SCL decoder works by allowing additional rounds of SCL decoding when the first SCL decoding attempt fails, using a novel bit-flipping metric. The proposed bit-flipping metric exploits the inherent relations between the information bits in polar codes that are represented by a correlation matrix. The correlation matrix is then optimized using emerging deep-learning techniques. Performance results on a polar code of length 128 with 64 information bits concatenated with a 24-bit cyclic redundancy check show that the proposed bit-flipping metric in the proposed DL-SCL decoder requires up to 66% fewer multiplications and up to 36% fewer additions, without any need to perform transcendental functions, and by providing almost the same error-correction performance in comparison with the state of the art.
Fast SC decoding overcomes the latency caused by the serial nature of the SC decoding by identifying new nodes in the upper levels of the SC decoding tree and implementing their fast parallel decoders. In this work, we first present a novel sequence repetition node corresponding to a particular class of bit sequences. Most existing special node types are special cases of the proposed sequence repetition node. Then, a fast parallel decoder is proposed for this class of node. To further speed up the decoding process of general nodes outside this class, a threshold-based hard-decision-aided scheme is introduced. The threshold value that guarantees a given error-correction performance in the proposed scheme is derived theoretically. Analysis and hardware implementation results on a polar code of length $1024$ with code rates $1/4$, $1/2$, and $3/4$ show that our proposed algorithm reduces the required clock cycles by up to $8%$, and leads to a $10%$ improvement in the maximum operating frequency compared to state-of-the-art decoders without tangibly altering the error-correction performance. In addition, using the proposed threshold-based hard-decision-aided scheme, the decoding latency can be further reduced by $57%$ at $mathrm{E_b}/mathrm{N_0} = 5.0$~dB.
We exploit the redundancy of the language-based source to help polar decoding. By judging the validity of decoded words in the decoded sequence with the help of a dictionary, the polar list decoder constantly detects erroneous paths after every few bits are decoded. This path-pruning technique based on joint decoding has advantages over stand-alone polar list decoding in that most decoding errors in early stages are corrected. In order to facilitate the joint decoding, we first propose a construction of dynamic dictionary using a trie and show an efficient way to trace the dictionary during decoding. Then we propose a joint decoding scheme of polar codes taking into account both information from the channel and the source. The proposed scheme has the same decoding complexity as the list decoding of polar codes. A list-size adaptive joint decoding is further implemented to largely reduce the decoding complexity. We conclude by simulation that the joint decoding schemes outperform stand-alone polar codes with CRC-aided successive cancellation list decoding by over 0.6 dB.
Polar codes are a class of linear block codes that provably achieves channel capacity, and have been selected as a coding scheme for $5^{rm th}$ generation wireless communication standards. Successive-cancellation (SC) decoding of polar codes has mediocre error-correction performance on short to moderate codeword lengths: the SC-Flip decoding algorithm is one of the solutions that have been proposed to overcome this issue. On the other hand, SC-Flip has a higher implementation complexity compared to SC due to the required log-likelihood ratio (LLR) selection and sorting process. Moreover, it requires a high number of iterations to reach good error-correction performance. In this work, we propose two techniques to improve the SC-Flip decoding algorithm for low-rate codes, based on the observation of channel-induced error distributions. The first one is a fixed index selection (FIS) scheme to avoid the substantial implementation cost of LLR selection and sorting with no cost on error-correction performance. The second is an enhanced index selection (EIS) criterion to improve the error-correction performance of SC-Flip decoding. A reduction of $24.6%$ in the implementation cost of logic elements is estimated with the FIS approach, while simulation results show that EIS leads to an improvement on error-correction performance improvement up to $0.42$ dB at a target FER of $10^{-4}$.
In this paper we address the problem of selecting factor-graph permutations of polar codes under belief propagation (BP) decoding to significantly improve the error-correction performance of the code. In particular, we formalize the factor-graph permutation selection as the multi-armed bandit problem in reinforcement learning and propose a decoder that acts like an online-learning agent that learns to select the good factor-graph permutations during the course of decoding. We use state-of-the-art algorithms for the multi-armed bandit problem and show that for a 5G polar codes of length 128 with 64 information bits, the proposed decoder has an error-correction performance gain of around 0.125 dB at the target frame error rate of 10^{-4}, when compared to the approach that randomly selects the factor-graph permutations.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
