Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userInkjet Printed Wire-Grid Polarizers for the THz Frequency Range
286
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We have investigated the use of inkjet printing technology for the production of THz range wire-grid polarizers using time-domain terahertz spectroscopy (TDTS). Such technology affords an inexpensive and reproducible way of quickly manufacturing THz range metamaterial structures. As a proof-of-concept demonstration, numerous thin silver-nanoparticle ink lines were printed using a Dimatix DMP-2831 printer. We investigated the optimal printing geometry of the polarizers by examining a number of samples with printed wires of varying thickness and spacing. We also investigated the polarization properties of multiply-stacked polarizers.
rate research
Read More
Stacked layers of metal meshes embedded in a dielectric substrate are routinely used for providing spectral selection at THz frequencies. Recent work has shown that particular geometries allow the refractive index to be tuned to produce practical artificial materials. Here we show that by spatially grading in the plane of the mesh we can manufacture a Graded Index (GrIn) thin flat lens optimized for use at THz frequencies. Measurements on a prototype lens show we are able to obtain the parabolic profile of a Woods type lens which is dependent only on the mesh parameters. This technique could realize other exotic optical devices.
We report single and multiband linear polarizers for terahertz (THz) frequencies using cut-wire metamaterials (MM). The MMs are designed by finite element method, fabricated by electron beam lithography, and characterized by THz time-domain spectroscopy. The MM unit cells consist of single or multiple length cut-wire pads of gold on semi-insulating Gallium Arsenide for single or multiple band polarizers. The dependence of the resonance frequency of the single band polarizer on the length of the cut-wires is explained based a transmission line model.
The advancement of 3D-printing opens up a new way of constructing affordable custom terahertz (THz) components due to suitable printing resolution and THz transparency of polymer materials. We present a way of calculating, designing and fabricating a THz waveplate that phase-modulates an incident THz beam ({lambda}=2.14 mm) in order to create a predefined intensity profile of the optical wavefront on a distant image plane. Our calculations were performed for two distinct target intensities with the use of a modified Gerchberg-Saxton algorithm. The resulting phase-modulating profiles were used to model the polyactide elements, which were printed out with a commercially available 3D-printer. The results were tested in an THz experimental setup equipped with a scanning option and they showed good agreement with theoretical predictions.
We present an experimental and theoretical study of the optical properties of metal-dielectric-metal structures with patterned top metallic surfaces, in the THz frequency range. When the thickness of the dielectric slab is very small with respect to the wavelength, these structures are able to support strongly localized electromagnetic modes, concentrated in the subwavelength metal-metal regions. We provide a detailed analysis of the physical mechanisms which give rise to these photonic modes. Furthermore, our model quantitatively predicts the resonance positions and their coupling to free space photons. We demonstrate that these structures provide an efficient and controllable way to convert the energy of far field propagating waves into near field energy.
A well-defined insulating layer is of primary importance in the fabrication of passive (e.g. capacitors) and active (e.g. transistors) components in integrated circuits. One of the most widely known 2-Dimensional (2D) dielectric materials is hexagonal boron nitride (hBN). Solution-based techniques are cost-effective and allow simple methods to be used for device fabrication. In particular, inkjet printing is a low-cost, non-contact approach, which also allows for device design flexibility, produces no material wastage and offers compatibility with almost any surface of interest, including flexible substrates. In this work we use water-based and biocompatible graphene and hBN inks to fabricate all-2D material and inkjet-printed capacitors. We demonstrate an areal capacitance of 2.0 pm 0.3 nF cm^(-2) for a dielectric thickness of sim 3 mu m and negligible leakage currents, averaged across more than 100 devices. This gives rise to a derived dielectric constant of 6.1 pm 1.7. The inkjet printed hBN dielectric has a breakdown field of 1.9 pm 0.3 MV cm^(-1). Fully printed capacitors with sub-/mu m hBN layer thicknesses have also been demonstrated. The capacitors are then exploited in two fully printed demonstrators: a resistor-capacitor (RC) low-pass filter and a graphene-based field effect transistor.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
