Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userArrayed van der Waals Vertical Heterostructures based on 2D GaSe Grown by Molecular Beam Epitaxy
83
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Vertically stacking two dimensional (2D) materials can enable the design of novel electronic and optoelectronic devices and realize complex functionality. However, the fabrication of such artificial heterostructures in wafer scale with an atomically-sharp interface poses an unprecedented challenge. Here, we demonstrate a convenient and controllable approach for the production of wafer-scale 2D GaSe thin films by molecular beam epitaxy. In-situ reflection high-energy electron diffraction oscillations and Raman spectroscopy reveal a layer-by-layer van der Waals epitaxial growth mode. Highly-efficient photodetector arrays were fabricated based on few-layer GaSe on Si. These photodiodes show steady rectifying characteristics and a relatively high external quantum efficiency of 23.6%. The resultant photoresponse is super-fast and robust with a response time of 60 us. Importantly, the device shows no sign of degradation after 1 million cycles of operation. Our study establishes a new approach to produce controllable, robust and large-area 2D heterostructures and presents a crucial step for further practical applications.
rate research
Read More
Two-dimensional (2D) materials exhibit a number of improved mechanical, optical, electronic properties compared to their bulk counterparts. The absence of dangling bonds in the cleaved surfaces of these materials allows combining different 2D materials into van der Waals heterostructures to fabricate p-n junctions, photodetectors, 2D-2D ohmic contacts that show unexpected performances. These intriguing results are regularly summarized in comprehensive reviews. A strategy to tailor their properties even further and to observe novel quantum phenomena consists in the fabrication of superlattices whose unit cell is formed either by two dissimilar 2D materials or by a 2D material subjected to a periodical perturbation, each component contributing with different characteristics. Furthermore, in a 2D materials-based superlattice, the interlayer interaction between the layers mediated by van der Waals forces constitutes a key parameter to tune the global properties of the superlattice. The above-mentioned factors reflect the potential to devise countless combinations of van der Waals 2D materials based superlattices. In the present feature article, we explain in detail the state-of-the-art of 2D materials-based superlattices and we describe the different methods to fabricate them, classified as vertical stacking, intercalation with atoms or molecules, moire patterning, strain engineering and lithographic design. We also aim to highlight some of the specific applications for each type of superlattices.
Van der Waals heterostructures, which explore the synergetic properties of two-dimensional (2D) materials when assembled into three-dimensional stacks, have already brought to life a number of exciting new phenomena and novel electronic devices. Still, the interaction between the layers in such assembly, possible surface reconstruction, intrinsic and extrinsic defects are very difficult to characterise by any method, because of the single-atomic nature of the crystals involved. Here we present a convergent beam electron holographic technique which allows imaging of the stacking order in such heterostructures. Based on the interference of electron waves scattered on different crystals in the stack, this approach allows one to reconstruct the relative rotation, stretching, out-of-plane corrugation of the layers with atomic precision. Being holographic in nature, our approach allows extraction of quantitative information about the three-dimensional structure of the typical defects from a single image covering thousands of square nanometres. Furthermore, qualitative information about the defects in the stack can be extracted from the convergent diffraction patterns even without reconstruction - simply by comparing the patterns in different diffraction spots. We expect that convergent beam electron holography will be widely used to study the properties of van der Waals heterostructures.
Van der Waals materials can be easily combined in lateral and vertical heterostructures, providing an outstanding platform to engineer elusive quantum states of matter. However, a critical problem in material science is to establish tangible links between real materials properties and terms that can be cooked up on the model Hamiltonian level to realize different exotic phenomena. Our review aims to do precisely this: we first discuss, in a way accessible to the materials community, what ingredients need to be included in the hybrid quantum materials recipe, and second, we elaborate on the specific materials that would possess the necessary qualities. We will review the well-established procedures for realizing 2D topological superconductors, quantum spin-liquids and flat bands systems, emphasizing the connection between well-known model Hamiltonians and real compounds. We will use the most recent experimental results to illustrate the power of the designer approach.
Recent works have revealed that van der Waals (vdW) epitaxial growth of 2D materials on crystalline substrates, such as hexagonal boron nitride (hBN), leads to formation of self-aligned grains, which results in defect-free stitching between the grains. However, how the weak vdW interaction causes strong limitation on orientation of grains is still not understood yet. In this work, we have focused on investigation of mechanism of self-alignment of MoS2 grains in vdW epitaxial growth on hBN. Through calculation based on density functional theory and the Lennard-Jones potential, we found that interaction energy between MoS2 and hBN strongly depends both on size and orientation of MoS2. We also found that, when size of MoS2 is ca. 40 nm, rotational energy barrier can exceed ~ 1 eV, which should suppress rotation to limit orientation of MoS2 even at growth temperature.
The development of van der Waals (vdW) crystals and their heterostructures has created a fascinating platform for exploring optoelectronic properties in the two-dimensional (2D) limit. With the recent discovery of 2D magnets, the control of the spin degree of freedom can be integrated to realize 2D spin-optoelectronics with spontaneous time-reversal symmetry breaking. Here, we report spin photovoltaic effects in vdW heterostructures of atomically thin magnet chromium triiodide (CrI3) sandwiched by graphene contacts. In the absence of a magnetic field, the photocurrent displays a distinct dependence on light helicity, which can be tuned by varying the magnetic states and photon energy. Circular polarization-resolved absorption measurements reveal that these observations originate from magnetic-order-coupled and thus helicity-dependent charge-transfer exciton states. The photocurrent displays multiple plateaus as the magnetic field is swept, which are associated with different spin configurations enabled by the layered antiferromagnetism and spin-flip transitions in CrI3. Remarkably, giant photo-magnetocurrent is observed, which tends to infinity for a small applied bias. Our results pave the way to explore emergent photo-spintronics by engineering magnetic vdW heterostructures.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
