Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userMagnetized Interstellar Molecular Clouds. I. Comparison Between Simulations and Zeeman Observations
247
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The most accurate measurements of magnetic fields in star-forming gas are based on the Zeeman observations analyzed by Crutcher et al. (2010). We show that their finding that the 3D magnetic field scales approximately as density$^{0.65}$ can also be obtained from analysis of the observed line-of-sight fields. We present two large-scale AMR MHD simulations of several thousand $M_odot$ of turbulent, isothermal, self-gravitating gas, one with a strong initial magnetic field (Alfven Mach number $M_{A,0}= 1$) and one with a weak initial field ($M_{A,0}=10$). We construct samples of the 100 most massive clumps in each simulation and show that they exhibit a power-law relation between field strength and density in excellent agreement with the observed one. Our results imply that the average field in molecular clumps in the interstellar medium is $<B_{tot}> sim 42 n_{H,4}^{0.65} mu$G. Furthermore, the median value of the ratio of the line-of-sight field to density$^{0.65}$ in the simulations is within a factor of about (1.3, 1.7) of the observed value for the strong and weak field cases, respectively. The median value of the mass-to-flux ratio, normalized to the critical value, is 70% of the line-of-sight value. This is larger than the 50% usually cited for spherical clouds because the actual mass-to-flux ratio depends on the volume-weighted field, whereas the observed one depends on the mass-weighted field. Our results indicate that the typical molecular clump in the ISM is significantly supercritical (~ factor of 3). The results of our strong-field model are in very good quantitative agreement with the observations of Li et al. (2009), which show a strong correlation in field orientation between small and large scales. Because there is a negligible correlation in the weak-field model, we conclude that molecular clouds form from strongly magnetized (although magnetically supercritical) gas.
rate research
Read More
We perform ideal MHD high resolution AMR simulations with driven turbulence and self-gravity and find that long filamentary molecular clouds are formed at the converging locations of large-scale turbulence flows and the filaments are bounded by gravity. The magnetic field helps shape and reinforce the long filamentary structures. The main filamentary cloud has a length of ~4.4 pc. Instead of a monolithic cylindrical structure, the main cloud is shown to be a collection of fiber/web-like sub-structures similar to filamentary clouds such as L1495. Unless the line-of-sight is close to the mean field direction, the large-scale magnetic field and striations in the simulation are found roughly perpendicular to the long axis of the main cloud, similar to 1495. This provides strong support for a large-scale moderately strong magnetic field surrounding L1495. We find that the projection effect from observations can lead to incorrect interpretations of the true three-dimensional physical shape, size, and velocity structure of the clouds. Helical magnetic field structures found around filamentary clouds that are interpreted from Zeeman observations can be explained by a simple bending of the magnetic field that pierces through the cloud. We demonstrate that two dark clouds form a T-shape configuration which are strikingly similar to the Infrared dark cloud SDC13 leading to the interpretation that SDC13 results from a collision of two long filamentary clouds. We show that a moderately strong magnetic field (M_A ~ 1) is crucial for maintaining a long and slender filamentary cloud for a long period of time ~0.5 million years.
We study the rotational properties of magnetized and self-gravitating molecular cloud cores formed in 2 very high resolution 3D molecular cloud simulations.The simulations have been performed using the code RAMSES at an effective resolution of 4096^3.One simulation represents a mildly magnetically-supercritical cloud and the other a strongly magnetically-supercritical cloud.A noticeable difference between the 2 simulations is the core formation efficiency (CFE) of the high density cores.In the strongly supercritical simulations the CFE is ~33 % per free-fall time of the cloud tff,cl, whereas in the mildly supercritical simulations this value goes down to ~6%/tff,cl. A comparison of the intrinsic specific angular momentum j3D distributions of the cores with the distribitions of j2D derived using synthetic 2D velocity maps of the cores,shows that the synthetic observations tend to overestimate the true value of j by a factor of ~10.The origin of this discrepancy lies in the fact that contrary to the intrinsic determination which sums up the individual gas parcels contributions to j, the determination of j using the observational procedure which is based on a measurement on the global velocity gradient under the hypothesis of uniform rotation smoothes out the complex fluctuations present in the 3D velocity field. Our results provide a natural explanation for the discrepancy by a factor ~10 observed between the intrinsic 3D distributions of j and the corresponding distributions derived in real observations.We suggest that measurements of j which are based on the measurement of the observed global velocity gradients may need to be reduced by a factor of ~10 in order to derive a more accurate estimate of j in the cores.
[Abridged] The Lupus I cloud is found between the Upper-Scorpius and the Upper-Centaurus-Lupus sub-groups, where the expanding USco HI shell appears to interact with a bubble currently driven by the winds of the remaining B-stars of UCL. We investigate if the Lupus I molecular could have formed in a colliding flow, and how the kinematics of the cloud might have been influenced by the larger scale gas dynamics. We performed APEX 13CO and C18O observations of three parts of Lupus. We compare these results to the atomic hydrogen data from the GASS HI survey and our dust emission results presented in the previous paper. Based on the velocity information, we present a geometric model for the interaction zone between the USco shell and the UCL wind bubble. We present evidence that the molecular gas of Lupus I is tightly linked to the atomic material of the USco shell. The CO emission in Lupus I is found mainly at velocities in the same range as the HI velocities. Thus, the molecular cloud is co-moving with the expanding USco atomic Hi shell. The gas in the cloud shows a complex kinematic structure with several line-of-sight components that overlay each other. The non-thermal velocity dispersion is in the transonic regime in all parts of the cloud and could be injected by external compression. Our observations and the derived geometric model agree with a scenario where Lupus I is located in the interaction zone between the USco shell and the UCL wind bubble. The kinematics observations are consistent with a scenario where the Lupus I cloud formed via shell instabilities. The particular location of Lupus I between USco and UCL suggests that counter-pressure from the UCL wind bubble and pre-existing density enhancements, perhaps left over from the gas stream that formed the stellar subgroups, may have played a role in its formation.
We present results of wide-field $^{12}$CO ($J = 2 - 1$) and $^{13}$CO ($J = 2 - 1$) observations toward the Aquila Rift and Serpens molecular cloud complexes (25$^circ < l < 33^circ$ and $1^circ < b < 6^circ$) at an angular resolution of 3$$.4 ($approx$ 0.25 pc) and at a velocity resolution of 0.079 km s$^{-1}$ with the velocity coverage of $-5$ km s$^{-1} < V_{rm LSR} <$ 35 km s$^{-1}$. We found that the $^{13}$CO emission better traces the structures seen in the extinction map and derived the $X_{rm ^{13}CO}$-factor of this region. Applying texttt{SCIMES} to the $^{13}$CO data cube, we identified 61 clouds and derived their masses, radii, and line widths. The line-width-radius relation of the identified clouds basically follows those of nearby molecular clouds. Majority of the identified clouds are close to virial equilibrium although the dispersion is large. By inspecting the $^{12}$CO channel maps by eye, we found several arcs which are spatially extended to 0.2 $-$ 3 degree in length. In the longitude-velocity diagrams of $^{12}$CO, we also found the two spatially-extended components which appear to converge toward Serpens South and W40 region. The existence of two components with different velocities and arcs suggests that large-scale expanding bubbles and/or flows play a role in the formation and evolution of the Serpens South and W40 cloud.
Red supergiant stars (RSGs) and yellow hypergiant stars (YHGs) are believed to be the high-mass counterparts of stars in the AGB and early post-AGB phases. We study the mass-loss in the post main-sequence evolution of massive stars, through the properties of their envelopes in the intermediate and warm gas layers. These are the regions where the acceleration of the gas takes place and the most recent mass-loss episodes can be seen. We used the HIFI instrument on-board the Herschel Space Observatory to observe sub-mm and FIR transitions of CO, water, and their isotopologues in a sample of two RSGs (NML Cyg and Betelgeuse) and two YHGs (IRC+10420 and AFGL 2343) stars. We present an inventory of the detected lines and analyse the information revealed by their spectral profiles. On the basis of the results presented in an earlier study, we model the CO and 13CO emission in IRC+10420 and compare it to a set of lines ranging from the mm, to the FIR. Red supergiants have stronger high-excitation lines than the YHGs, indicating that they harbour dense and hot inner shells contributing to these transitions. Consequently, these high-J lines in RSGs originate from acceleration layers that have not yet reached the circumstellar terminal velocity and have narrower profiles than their flat-topped lower-J counterparts. The YHGs tend to lack this inner component, in line with the picture of detached, hollow envelopes derived from studies at longer wavelengths. NH3 is only detected in two sources (NML Cyg, IRC+10420), which are also observed to be the strongest water-line emitters of the studied sample. In contrast, OH is detected in all sources and does not seem to correlate with the water line intensities. We show that the IRC+10420 model derived solely from mm low-J CO transitions is capable of reproducing the high-J transitions when the temperature in the inner shell is simply lowered by about 30%.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
