Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userLocalized surface plasmon resonance (LSPR) and refractive index sensitivity of vacuum evaporated nanostructured gold thin films
279
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The plasmonic properties of vacuum evaporated nanostructured gold thin films having different types of nanoparticles are presented. The films with more than 6 nm thickness show presence of nanorods having non cylindrical shape with triangular base. Two characteristics plasmon bands have been recoreded in absorption spectra. First one occurs below 500 nm and other one at higher wavelength side. Both the peaks show dependence on the dielectric property of surroundings. The higher wavelength localized surface plasmon resonance (LSPR) peak shifts to higher wavelength with an increase in the nanoparticle size, surface roughness and refractive index of the surrounding (Methylene Blue dye coating). This shows that such thin films can be used as sensor for organic molecules with a refractive index sensitivity ranging from 250 - 305 nm/RIU (Refractive Index Unit).
rate research
Read More
We report a direct observation of segregation of gold atoms to the near surface regime due to 1.5 MeV Au2+ ion impact on isolated gold nanostructures deposited on silicon. Irradiation at fluences of 6x10^13, 1x10^14 and 5x10^14 ions cm-2 at a high beam flux of 6.3x1012 ions cm-2 s-1 show a maximum transported distance of gold atoms into the silicon substrate to be 60, 45 and 23 nm, respectively. At a lower fluence (6x1013 ions cm-2) transport has been found to be associated with the formation of gold silicide (Au5Si2). At a high fluence value of 5x10^14 ions cm-2, disassociation of gold silicide and out-diffusion lead to segregation of gold to defect - rich surface and interface region.
Tin sulphide thin films of p-type conductivity were grown on glass substrates. The refractive index of the as grown films, calculated using both Transmission and ellipsometry data were found to follow the Sellmeier dispersion model. The improvement in the dispersion data obtained using ellipsometry was validated by Wemple-Dedomenico (WDD) single oscillator model fitting. The optical properties of the films were found to be closely related to the structural properties of the films. The band-gap, its spread and appearance of defect levels within the band-gap intimately controls the refractive index of the films.
We discuss four important aspects of 1.5 MeV Au2+ ion-induced flux dependent sputtering from gold nanostrcutures (of an average size 7.6 nm and height 6.9 nm) that are deposited on silicon substrates: (a) Au sputtering yield at the ion flux of 6.3x10^12 ions cm-2 s-1 is found to be 312 atoms/ion which is about five times the sputtering yield reported earlier under identical irradiation conditions at a lower beam flux of 10^9 ions cm-2 s-1, (b) the sputtered yield increases with increasing flux at lower fluence and reduces at higher fluence (1.0x10^15 ions cm-2) for nanostructured thin films while the sputtering yield increases with increasing flux and fluence for thick films (27.5 nm Au deposited on Si) (c) Size distribution of sputtered particles has been found to vary with the incident beam flux showing a bimodal distribution at higher flux and (d) the decay exponent obtained from the size distributions of sputtered particles showed an inverse power law dependence ranging from 1.5 to 2.5 as a function of incident beam flux. The exponent values have been compared with existing theoretical models to understand the underlying mechanism. The role of wafer temperature associated with the beam flux has been invoked for a qualitative understanding of the sputtering results in both the nanostructured thin films and thick films.
In this letter, we study how coupling between AuNPs and ZnO thin films affects their emission properties. The emission intensity of ZnO thin films changes when Al2O3 spacer layer of different thickness are included in ZnO/Au films, consistent with theoretical predictions. The emission properties are also controlled using the polarization of the excitation source. Emission properties depended on the polarization of the excitation source because of the surface plasmon resonance of AuNPs. The photoluminescence anisotropy of these systems shows that enhanced photoluminescence can be achieved through coupling of the emission from ZnO with the surface plasmon resonance of AuNPs.
Plasmon drag effect is studied theoretically and experimentally in gold films with a sine-wave height profile. Numerical simulations based on the modified electromagnetic momentum loss approach are shown to correctly describe the photoinduced voltage associated with propagating surface plasmon polaritons. Direct proportionality of energy and momentum transfer in interactions of plasmons and free electrons in metal is proven to be valid for surfaces with relatively low height modulation amplitudes. The effect is also discussed in frames of an equivalent circuit model, which can provide qualitative description for surfaces with random roughness.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
