Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userAC susceptibility study of superconducting YBa2Cu3O7:Agx bulk composites (x = 0.0-0.20): The role of intra and inter granular coupling
111
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
We report the effect of silver addition on superconducting performance of bulk YBCO (YBa2Cu3O7) superconductor. All the studied samples are prepared by conventional solid-state reaction method. Rietveld fitted X-ray diffraction data confirmed the single phase formation for all the studied samples. Detailed AC susceptibility measurements as a function of driven AC amplitude (1Oe-17Oe) of these samples revealed the enhancement of grains coupling with increasing Ag content in YBCO+Agx composite system. 10wt% Ag added YBCO superconductors exhibited the optimum inter granular coupling. The Scanning Electron Microscopy (SEM) observations indicate an increase in the grains connectivity in terms of narrow grain boundaries for doped samples. The average grain size is found to increase with Ag doping. It is concluded that limited addition of Ag in bulk YBCO superconductor significantly improves the grains coupling and as result optimum superconducting performance. YBCO+Ag composites could prove to be potential candidates for bulk superconducting applications of the studied high Tc system.
rate research
Read More
We report high field (up to 13 Tesla) magneto transport R(T)H] of YBa2Cu3O7 (YBCO):Agx (x= 0.0, 0.1 and 0.2) composites. The transport properties are significantly improved by Ag doping on the insulating grain boundaries of YBCO. Pure and Ag diffused YBCO superconducting samples are synthesized through solid state reaction route. Both pure and Ag doped YBCO are superconducting at below 90K. Though, the Tc (R=0) of YBCO:Ag samples under applied field of 13 Tesla is around 65K, the same is 45K for pure YBCO under same applied field. The upper critical field [Hc2(0)], being estimated from R(T)H is around 70Tesla for pristine sample, and is above 190Tesla for Ag doped samples. The boarding of the resistive transition under applied magnetic field is comparatively less and nearly single step for Ag doped samples, while the same is clearly two step and relatively much larger for the pristine YBCO. The resistive broadening is explained on the basis of changed inter-granular coupling and thermally activated flux flow (TAFF). The TAFF activation energy (U0) is found to be linear with applied magnetic field for all the samples, but with nearly an order of magnitude less value for the Ag doped samples. Summarily, it is shown that inclusion of Ag significantly improves the superconducting performance of YBCO:Ag composites, in particular under applied field.
We have investigated the ac susceptibility of the spin triplet superconductor Sr$_2$RuO$_4$ as a function of magnetic field in various directions at temperatures down to 60 mK. We have focused on the in-plane field configuration (polar angle $theta simeq 90^{circ}$), which is a prerequisite for inducing multiple superconducting phases in Sr$_2$RuO$_4$. We have found that the previous attribution of a pronounced feature in the ac susceptibility to the second superconducting transition itself is not in accord with recent measurements of the thermal conductivity or of the specific heat. We propose that the pronounced feature is a consequence of additional involvement of vortex pinning originating from the second superconducting transition.
We report the effect of Ni doping on superconductivity of FeSe0.5Te0.5. The single crystal samples of series Fe1-xNixSe0.5Te0.5 (x=0.0, 0.01, 0.03, 0.05, 0.07, 0.10 and 0.20) are synthesized via vacuum shield solid state reaction route and high temperature heating followed by slow cooling. All the crystals of Fe1-xNixSe0.5Te0.5 series with x up to 0.20, i.e., 20% substitution of Ni at Fe site are crystallized in single phase tetragonal structure with space group P4/nmm. The electrical resistivity measurements revealed that Tc decreases fast with increase of Ni concentration in Fe1-xNixSe0.5Te0.5. Namely the superconducting transition temperature (Tc) being defined as resistivity =0 decrease from 12K to around 4K and 2K for x=0.01 and 0.03 samples respectively. For x=0.05 (5at% Ni at Fe site) though Tconset is observed in resistivity measurements but r{ho}=0 is not seen down to 2K. For x more than 0.07, neither the Tconset nor Tcr{ho}=0 is seen down 2K in R-T measurements. It is demonstrated that Ni doping at Fe site in FeSe0.5Te0.5 superconductor suppresses superconductivity fast. The rate of Tc depression is albeit non monotonic. Summarily, a systematic study on suppression of superconductivity with Fe site Ni doping in flux free gown FeSe0.5Te0.5 single crystals is presented in the current communication.
In this letter, we present the superconducting property characterization of a phase pure reasonably good quality YBa2Cu3O7-{delta} sample. Studied compound is crystallized in orthorhombic Pmmm space group with lattice parameters a, b, and c are 3.829(2) {AA}, 3.887(1) {AA} and 11.666(3) {AA} respectively. Bulk superconductivity is observed below 90K as evidenced by resistivity and dc/ac magnetization measurements. The resistivity under magnetic field ({rho}TH) measurements showed clearly both the intra-grain and inter-grain transitions, which are supplemented by detailed (varying frequency and amplitude) ac susceptibility studies as well. The upper critical field at 0K i.e., Hc2(0) being determined from {rho}TH measurements with 50% criteria of resistivity drope is ~ 70 Tesla. Studied polycrystalline YBa2Cu3O7-{delta} is subjected to detailed heat capacity (CP) studies. Cp exhibited well defined anomaly at below 90 K, which decreases with applied field. Though the Cp anomaly/peak at Tc reduces with applied field, the same is not completely suppressed in high applied fields of up to 12 Tesla. The Sommerfeld constant ({gamma}) and Debye temperature ({Theta}D) as determined from low temperature fitting of CP(T) data to Sommerfeld-Debye model, are 10.65 mJ/mole-K2 and 312.3 K respectively. The results are compared with existing literature on bulk polycrystalline superconducting YBa2Cu3O7-{delta} sample
There are numerous potential applications for superconducting tapes, based on YBa2Cu3O7-x (YBCO) films coated onto metallic substrates. A long established goal of more than 15 years has been to understand the magnetic flux pinning mechanisms which allow films to maintain high current densities out to high magnetic fields. In fact, films carry 1-2 orders of magnitude higher current densities than any other form of the material. For this reason, the idea of further improving pinning has received little attention. Now that commercialisation of conductors is much closer, for both better performance and lower fabrication costs, an important goal is to achieve enhanced pinning in a practical way. In this work, we demonstrate a simple and industrially scaleable route which yields a 1.5 to 5-fold improvement in the in-field current densities of already-high-quality conductors.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
