Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userActive control of magnetoresistance of organic spin valves using ferroelectricity
235
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Organic spintronic devices have been appealing because of the long spin life time of the charge carriers in the organic materials and their low cost, flexibility and chemical diversity. In previous studies, the control of resistance of organic spin valves is generally achieved by the alignment of the magnetization directions of the two ferromagnetic electrodes, generating magnetoresistance.1 Here we employ a new knob to tune the resistance of organic spin valves by adding a thin ferroelectric interfacial layer between the ferromagnetic electrode and the organic spacer. We show that the resistance can be controlled by not only the spin alignment of the two ferromagnetic electrodes, but also by the electric polarization of the interfacial ferroelectric layer: the MR of the spin valve depends strongly on the history of the bias voltage which is correlated with the polarization of the ferroelectric layer; the MR even changes sign when the electric polarization of the ferroelectric layer is reversed. This new tunability can be understood in terms of the change of relative energy level alignment between ferromagnetic electrode and the organic spacer caused by the electric dipole moment of the ferroelectric layer. These findings enable active control of resistance using both electric and magnetic fields, opening up possibility for multi-state organic spin valves and shed light on the mechanism of the spin transport in organic spin valves.
rate research
Read More
Magnetoelectric coupling has been a trending research topic in both organic and inorganic materials and hybrids. The concept of controlling magnetism using an electric field is particularly appealing in energy efficient applications. In this spirit, ferroelectricity has been introduced to organic spin valves to manipulate the magneto transport, where the spin transport through the ferromagnet/organic spacer interfaces (spinterface) are under intensive study. The ferroelectric materials in the organic spin valves provide a knob to vary the interfacial energy alignment and the interfacial crystal structures, both are critical for the spin transport. In this review, we first go over the basic concepts of spin transport in organic spin valves. Then we introduce the recent efforts of controlling magnetoresistance of organic spin valves using ferroelectricity, where the ferroelectric material is either inserted as an interfacial layer or used as a spacer material. The realization of the ferroelectric control of magneto transport in organic spin valve, advances our understanding in the spin transport through the ferromagnet/organic interface and suggests more functionality of organic spintronic devices.
The spin absorption process in a ferromagnetic material depends on the spin orientation relativelyto the magnetization. Using a ferromagnet to absorb the pure spin current created within a lateralspin-valve, we evidence and quantify a sizeable orientation dependence of the spin absorption inCo, CoFe and NiFe. These experiments allow determining the spin-mixing conductance, an elusivebut fundamental parameter of the spin-dependent transport. We show that the obtained valuescannot be understood within a model considering only the Larmor, transverse decoherence and spindiffusion lengths, and rather suggest that the spin-mixing conductance is actually limited by theSharvin conductance.
A magnetic spin filter tunnel barrier, sandwiched between a non-magnetic metal and a magnetic metal, is used to create a new magnetoresistive tunnel device, somewhat analogous to an optical polarizer-analyzer configuration. The resistance of these trilayer structures depends on the relative magnetization orientation of the spin filter and the ferromagnetic electrode. The spin filtering in this configuration yields a previously unobserved magnetoresistance effect, exceeding 100%.
We present the analysis of the spin signals obtained in NiFe based metallic lateral spin valves. We exploit the spin dependent diffusive equations in both the conventional 1D analytic modeling as well as in 3D Finite Element Method simulations. Both approaches are used for extracting the spin diffusion length $l_{sf}^{N}$ and the effective spin polarization $P_{eff}$ in Py/Al, Py/Cu and Py/Au based lateral nano-structures at both $300,K$ and $77,K$. Both the analytic modeling and 3D Finite Element Method simulations give consistent results. Combination of both models provides a powerful tool for reliable spin transport characterization in all metallic spin valves and gives an insight into the spin/charge current and spin accumulations 3D distributions in these devices. We provide the necessary ingredients to develop the 3D finite element modeling of diffusive spin transport.
We use nanometer-sized point contacts to a Co/Cu spin valve to study the giant magnetoresistance (GMR) of only a few Co domains. The measured data show strong device-to-device differences of the GMR curve, which we attribute to the absence of averaging over many domains. The GMR ratio decreases with increasing bias current. For one particular device, this is accompanied by the development of two distinct GMR plateaus, the plateau level depending on bias polarity and sweep direction of the magnetic field. We attribute the observed behavior to current-induced changes of the magnetization, involving spin transfer due to incoherent emission of magnons and self-field effects.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
