Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userHigh precision nano scale temperature sensing using single defects in diamond
127
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Measuring local temperature with a spatial resolution on the order of a few nanometers has a wide range of applications from semiconductor industry over material to life sciences. When combined with precision temperature measurement it promises to give excess to small temperature changes caused e.g. by chemical reactions or biochemical processes. However, nanoscale temperature measurements and precision have excluded each other so far owing to the physical processes used for temperature measurement of limited stability of nanoscale probes. Here we experimentally demonstrate a novel nanoscale temperature sensing technique based on single atomic defects in diamonds. Sensor sizes range from millimeter down to a few tens of nanometers. Utilizing the sensitivity of the optically accessible electron spin level structure to temperature changes we achieve a temperature noise floor of 5 mK Hz$^{-1/2}$ for single defects in bulk sensors. Using doped nanodiamonds as sensors yields temperature measurement with 130 mK Hz$^{-1/2}$ noise floor and accuracies down to 1 mK at length scales of a few ten nanometers. The high sensitivity to temperature changes together with excellent spatial resolution combined with outstanding sensor stability allows for nanoscale precision temperature determination enough to measure chemical processes of few or single molecules by their reaction heat even in heterogeneous environments like cells.
rate research
Read More
We presented a high-sensitivity temperature detection using an implanted single Nitrogen-Vacancy center array in diamond. The high-order Thermal Carr-Purcell-Meiboom-Gill (TCPMG) method was performed on the implanted single nitrogen vacancy (NV) center in diamond in a static magnetic field. We demonstrated that under small detunings for the two driving microwave frequencies, the oscillation frequency of the induced fluorescence of the NV center equals approximately to the average of the detunings of the two driving fields. On basis of the conclusion, the zero-field splitting D for the NV center and the corresponding temperature could be determined. The experiment showed that the coherence time for the high-order TCPMG was effectively extended, particularly up to 108 {mu}s for TCPMG-8, about 14 times of the value 7.7 {mu}s for thermal Ramsey method. This coherence time corresponded to a thermal sensitivity of 10.1 mK/Hz1/2. We also detected the temperature distribution on the surface of a diamond chip in three different circumstances by using the implanted NV center array with the TCPMG-3 method. The experiment implies the feasibility for using implanted NV centers in high-quality diamonds to detect temperatures in biology, chemistry, material science and microelectronic system with high-sensitivity and nanoscale resolution.
Nanomechanical sensors and quantum nanosensors are two rapidly developing technologies that have diverse interdisciplinary applications in biological and chemical analysis and microscopy. For example, nanomechanical sensors based upon nanoelectromechanical systems (NEMS) have demonstrated chip-scale mass spectrometry capable of detecting single macromolecules, such as proteins. Quantum nanosensors based upon electron spins of negatively-charged nitrogen-vacancy (NV) centers in diamond have demonstrated diverse modes of nanometrology, including single molecule magnetic resonance spectroscopy. Here, we report the first step towards combining these two complementary technologies in the form of diamond nanomechanical structures containing NV centers. We establish the principles for nanomechanical sensing using such nano-spin-mechanical sensors (NSMS) and assess their potential for mass spectrometry and force microscopy. We predict that NSMS are able to provide unprecedented AC force images of cellular biomechanics and to, not only detect the mass of a single macromolecule, but also image its distribution. When combined with the other nanometrology modes of the NV center, NSMS potentially offer unparalleled analytical power at the nanoscale.
The ability to sensitively detect charges under ambient conditions would be a fascinating new tool benefitting a wide range of researchers across disciplines. However, most current techniques are limited to low-temperature methods like single-electron transistors (SET), single-electron electrostatic force microscopy and scanning tunnelling microscopy. Here we open up a new quantum metrology technique demonstrating precision electric field measurement using a single nitrogen-vacancy defect centre(NV) spin in diamond. An AC electric field sensitivity reaching ~ 140V/cm/surd Hz has been achieved. This corresponds to the electric field produced by a single elementary charge located at a distance of ~ 150 nm from our spin sensor with averaging for one second. By careful analysis of the electronic structure of the defect centre, we show how an applied magnetic field influences the electric field sensing properties. By this we demonstrate that diamond defect centre spins can be switched between electric and magnetic field sensing modes and identify suitable parameter ranges for both detector schemes. By combining magnetic and electric field sensitivity, nanoscale detection and ambient operation our study opens up new frontiers in imaging and sensing applications ranging from material science to bioimaging.
Solid-state quantum sensors are attracting wide interest because of their exceptional sensitivity at room temperature. In particular, the spin properties of individual nitrogen vacancy (NV) color centers in diamond make it an outstanding nanoscale sensor of magnetic fields, electric fields, and temperature, under ambient conditions. Recent work on ensemble NV-based magnetometers, inertial sensors, and clocks have employed $N$ unentangled color centers to realize a factor of up to $sqrt{N}$ improvement in sensitivity. However, to realize fully this signal enhancement, new techniques are required to excite efficiently and to collect fluorescence from large NV ensembles. Here, we introduce a light-trapping diamond waveguide (LTDW) geometry that enables both high fluorescence collection ($sim20%$) and efficient pump absorption achieving an effective path length exceeding $1$ meter in a millimeter-sized device. The LTDW enables in excess of $2%$ conversion efficiency of pump photons into optically detected magnetic resonance (ODMR) fluorescence, a textit{three orders of magnitude} improvement over previous single-pass geometries. This dramatic enhancement of ODMR signal enables broadband measurements of magnetic field and temperature at less than $1$ Hz, a frequency range inaccessible by dynamical decoupling techniques. We demonstrate $sim 1~mbox{nT}/sqrt{mbox{Hz}}$ magnetic field sensitivity for $0.1$ Hz to $10$ Hz and a thermal sensitivity of $sim 400 ~mumbox{K}/sqrt{mbox{Hz}}$ and estimate a spin projection limit at $sim 0.36$ fT/$sqrt{mbox{Hz}}$ and $sim 139~mbox{pK}/sqrt{mbox{Hz}}$, respectively.
Nanomagnetometry using the nitrogen-vacancy (NV) centre in diamond has attracted a great deal of interest because of the combined features of room temperature operation, nanoscale resolution and high sensitivity. One of the important goals for nano-magnetometry is to be able to detect nanoscale nuclear magnetic resonance (NMR) in individual molecules. Our theoretical analysis shows how a single molecule at the surface of diamond, with characteristic NMR frequencies, can be detected using a proximate NV centre on a time scale of order seconds with nanometer precision. We perform spatio-temporal resolution optimisation and also outline paths to greater sensitivity. In addition, the method is suitable for application in low and relatively inhomogeneous background magnetic fields in contrast to both conventional liquid and solid state NMR spectroscopy.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
