Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userFlute-Model Acoustic Metamaterials with Simultaneously Negative Bulk Modulus and Mass Density
192
0
0.0
(
0
)
Added by
Xiaopeng Zhao professor
Publication date
2012
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
We experimentally constructed a three-dimensional flute-model molecular structure acoustic metamaterial(AM)from a periodic array of perforated hollow steel tubes (PHSTs) and investigated its transmission and reflection behaviors in impedance tube system. The AM exhibited a transmission peak and an inverse phase, thus exhibiting the local resonance of the PHSTs. Based on the homogeneous media theory, the effective bulk modulus and mass density of the AM were calculated to be simultaneously negative; the refractive index was also negative. PHST AM slab focusing experiments showed that the medium with a resonant structure exhibited a distinct metamaterial property.
rate research
Read More
We present a study of elastic metamaterial that possesses multiple local resonances. We demonstrated that the elastic metamaterial can have simultaneously three negative effective parameters, i.e., negative effective mass, effective bulk modulus and effective shear modulus at a certain frequency range. Through the analysis of the resonant field, it has been elucidated that the three negative parameters are induced by dipolar, monopolar and quadrupolar resonance respectively. The dipolar and monopolar resonances result into the negative band for longitudinal waves, while the dipolar and quadrupolar resonances cause the negative band for transverse waves. The two bands have an overlapping frequency regime. A simultaneously negative refraction for both longitudinal waves and transverse waves has been demonstrated in the system.
Double-negative acoustic metamaterials (AMMs) offer the promising ability of superlensing for applications in ultrasonography, biomedical sensing and nondestructive evaluation. Here, under the simultaneous increasing or non-increasing mechanisms, we develop a unified topology optimization framework considering the different microstructure symmetries, minimal structural feature sizes and dispersion extents of effective parameters. Then we apply the optimization framework to furnish the heuristic resonance-cavity-based and space-coiling metamaterials with broadband double negativity. Meanwhile, we demonstrate the essences of double negativity derived from the novel artificial multipolar LC and Mie resonances which can be induced by controlling mechanisms in optimization. Furthermore, abundant numerical simulations validate the double negativity, negative refraction, enhancements of evanescent waves and subwavelengh imaging for the optimized AMMs. Finally, we experimentally show the desired broadband subwavelengh imaging using the 3D-printed optimized space-coiling metamaterial. The present methodology and broadband metamaterials provide the ideal strategy of constructing AMMs for subwavelengh imaging technology.
Well-established textbook arguments suggest that static electric susceptibility must be positive in all bodies [1]. However, it has been pointed out that media that are not in thermodynamic equilibrium are not necessarily subject to this restriction; negative static electric susceptibility has been predicted theoretically in systems with inverted populations of atomic and molecular energy levels [2,3], though this has never been confirmed experimentally. Here we exploit the design freedom afforded by metamaterials to fabricate active structures that exhibit the first experimental evidence of negative static electric susceptibility. Unlike the systems envisioned previously---which were expected to require reduced temperature and pressure---negative values are readily achieved at room temperature and pressure. Further, values are readily tuneable throughout the negative range of stability -1<chi^{(0)}<0, resulting in magnitudes that are over one thousand times greater than predicted previously [4]. This opens the door to new technological capabilities such as stable electrostatic levitation.
Mechanical metamaterials are architected manmade materials that allow for unique behaviors not observed in nature, making them promising candidates for a wide range of applications. Existing metamaterials lack tunability as their properties can only be changed to a limited extent after the fabrication. In this paper, we present a new magneto-mechanical metamaterial that allows great tunability through a novel concept of deformation mode branching. The architecture of this new metamaterial employs an asymmetric joint design using hard-magnetic soft active materials that permits two distinct actuation modes (bending and folding) under opposite-direction magnetic fields. The subsequent application of mechanical forces leads to the deformation mode branching where the metamaterial architecture transforms into two distinctly different shapes, which exhibit very different deformations and enable great tunability in properties such as mechanical stiffness and acoustic bandgaps. Furthermore, this metamaterial design can be incorporated with magnetic shape memory polymers with global stiffness tunability, which further enables the global shift of the acoustic behaviors. The combination of magnetic and mechanical actuations, as well as shape memory effects, imbue unmatched tunable properties to a new paradigm of metamaterials.
Acoustic negative-index metamaterials show promise in achieving superlensing for diagnostic medical imaging. In spite of the recent progress made in this field, most metamaterials suffer from deficiencies such as low spatial symmetry, sophisticated labyrinth topologies and narrow-band features, which make them difficult to be utilized for symmetric subwavelength imaging applications. Here, we propose a category of robust multi-cavity metamaterials and reveal their common double-negative mechanism enabled by multi-polar (dipole, quadrupole and octupole) resonances in both two-dimensional (2D) and three-dimensional (3D) scenarios. In particular, we discover explicit relationships governing the double-negative frequency bounds from equivalent circuit analogy. Moreover, broadband single-source and double-source subwavelength imaging is realized and verified by 2D and 3D superlens. More importantly, the analogical 3D superlens can ensure the subwavelength imaging in all directions. The proposed multi-polar resonance-enabled robust metamaterials and design methodology open horizons for easier manipulation of subwavelength waves and realization of practical 3D metamaterial devices.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
