Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userDense Molecular Gas: A Sensitive Probe of Stellar Feedback Models
184
0
0.0
(
0
)
Authors
Philip F. Hopkins
Ask ChatGPT about the research
No Arabic abstract
We show that the mass fraction of GMC gas (n>100 cm^-3) in dense (n>>10^4 cm^-3) star-forming clumps, observable in dense molecular tracers (L_HCN/L_CO(1-0)), is a sensitive probe of the strength and mechanism(s) of stellar feedback. Using high-resolution galaxy-scale simulations with pc-scale resolution and explicit models for feedback from radiation pressure, photoionization heating, stellar winds, and supernovae (SNe), we make predictions for the dense molecular gas tracers as a function of GMC and galaxy properties and the efficiency of stellar feedback. In models with weak/no feedback, much of the mass in GMCs collapses into dense sub-units, predicting L_HCN/L_CO(1-0) ratios order-of-magnitude larger than observed. By contrast, models with feedback properties taken directly from stellar evolution calculations predict dense gas tracers in good agreement with observations. Changing the strength or timing of SNe tends to move systems along, rather than off, the L_HCN-L_CO relation (because SNe heat lower-density material, not the high-density gas). Changing the strength of radiation pressure (which acts efficiently in the highest density gas), however, has a much stronger effect on L_HCN than on L_CO. We predict that the fraction of dense gas (L_HCN/L_CO(1-0)) increases with increasing GMC surface density; this drives a trend in L_HCN/L_CO(1-0) with SFR and luminosity which has tentatively been observed. Our results make specific predictions for enhancements in the dense gas tracers in unusually dense environments such as ULIRGs and galactic nuclei (including the galactic center).
rate research
Read More
We present results from multifrequency radiative hydrodynamical chemistry simulations addressing primordial star formation and related stellar feedback from various populations of stars, stellar energy distributions (SEDs) and initial mass functions. Spectra for massive stars, intermediate-mass stars and regular solar-like stars are adopted over a grid of 150 frequency bins and consistently coupled with hydrodynamics, heavy-element pollution and non-equilibrium species calculations. Powerful massive population III stars are found to be able to largely ionize H and, subsequently, He and He$^+$, causing an inversion of the equation of state and a boost of the Jeans masses in the early intergalactic medium. Radiative effects on star formation rates are between a factor of a few and 1 dex, depending on the SED. Radiative processes are responsible for gas heating and photoevaporation, although emission from soft SEDs has minor impacts. These findings have implications for cosmic gas preheating, primordial direct-collapse black holes, the build-up of cosmic fossils such as low-mass dwarf galaxies, the role of AGNi during reionization, the early formation of extended disks and angular-momentum catastrophe.
Recent surveys of the Galactic plane in the dust continuum and CO emission lines reveal that large ($gtrsim 50$~pc) and massive ($gtrsim 10^5$~$M_odot$) filaments, know as giant molecular filaments (GMFs), may be linked to galactic dynamics and trace the mid-plane of the gravitational potential in the Milky Way. We have imaged one entire GMF located at $lsim$52--54$^circ$ longitude, GMF54 ($sim$68~pc long), in the empirical dense gas tracers using the HCN(1--0), HNC(1--0), HCO$^+$(1--0) lines, and their $^{13}$C isotopologue transitions, as well as the N$_2$H$^+$(1--0) line. We study the dense gas distribution, the column density probability density functions (N-PDFs) and the line ratios within the GMF. The dense gas molecular transitions follow the extended structure of the filament with area filling factors between 0.06 and 0.28 with respect to $^{13}$CO(1--0). We constructed the N-PDFs of H$_2$ for each of the dense gas tracers based on their column densities and assumed uniform abundance. The N-PDFs of the dense gas tracers appear curved in log-log representation, and the HCO$^+$ N-PDF has the largest log-normal width and flattest power-law slope index. Studying the N-PDFs for sub-regions of GMF54, we found an evolutionary trend in the N-PDFs that high-mass star forming and Photon-Dominate Regions (PDRs) have flatter power-law indices. The integrated intensity ratios of the molecular lines in GMF54 are comparable to those in nearby galaxies. In particular, the N$_2$H$^+$/$^{13}$CO ratio, which traces the dense gas fraction, has similar values in GMF54 and all nearby galaxies except ULIRGs.
We present a numerical study of the evolution of molecular clouds, from their formation by converging flows in the warm ISM, to their destruction by the ionizing feedback of the massive stars they form. We improve with respect to our previous simulations by including a different stellar-particle formation algorithm, which allows them to have masses corresponding to single stars rather than to small clusters, and with a mass distribution following a near-Salpeter stellar IMF. We also employ a simplified radiative-transfer algorithm that allows the stellar particles to feed back on the medium at a rate that depends on their mass and the local density. Our results are as follows: a) Contrary to the results from our previous study, where all stellar particles injected energy at a rate corresponding to a star of ~ 10 Msun, the dense gas is now completely evacuated from 10-pc regions around the stars within 10-20 Myr, suggesting that this feat is accomplished essentially by the most massive stars. b) At the scale of the whole numerical simulations, the dense gas mass is reduced by up to an order of magnitude, although star formation (SF) never shuts off completely, indicating that the feedback terminates SF locally, but new SF events continue to occur elesewhere in the clouds. c) The SF efficiency (SFE) is maintained globally at the ~ 10% level, although locally, the cloud with largest degree of focusing of its accretion flow reaches SFE ~ 30%. d) The virial parameter of the clouds approaches unity before the stellar feedback begins to dominate the dynamics, becoming much larger once feedback dominates, suggesting that clouds become unbound as a consequence of the stellar feedback. e) The erosion of the filaments that feed the star-forming clumps produces chains of isolated dense blobs reminiscent of those observed in the vicinity of the dark globule B68.
We measure and quantify properties of galactic outflows and diffuse gas at $z geq 1$ in cosmological hydrodynamical simulations. Our novel sub-resolution model, MUPPI, implements supernova feedback using fully local gas properties, where the wind velocity and mass loading are not given as input. We find the following trends at $z = 2$ by analysing central galaxies having a stellar mass higher than $10^{9} M_{odot}$. The outflow velocity and mass outflow rate ($dot{M}_{rm out}$) exhibit positive correlations with galaxy mass and with the star formation rate (SFR). However, most of the relations present a large scatter. The outflow mass loading factor ($eta$) is between $0.2 - 10$. The comparison Effective model generates a constant outflow velocity, and a negative correlation of $eta$ with halo mass. The number fraction of galaxies where outflow is detected decreases at lower redshifts, but remains more than $80 %$ over $z = 1 - 5$. High SF activity at $z sim 2 - 4$ drives strong outflows, causing the positive and steep correlations of velocity and $dot{M}_{rm out}$ with SFR. The outflow velocity correlation with SFR becomes flatter at $z = 1$, and $eta$ displays a negative correlation with halo mass in massive galaxies. Our study demonstrates that both the MUPPI and Effective models produce significant outflows at $sim 1 / 10$ of the virial radius; at the same time shows that the properties of outflows generated can be different from the input speed and mass loading in the Effective model. Our MUPPI model, using local properties of gas in the sub-resolution recipe, is able to develop galactic outflows whose properties correlate with global galaxy properties, and consistent with observations.
We compile observations of the surface mass density profiles of dense stellar systems, including globular clusters in the Milky Way and nearby galaxies, massive star clusters in nearby starbursts, nuclear star clusters in dwarf spheroidals and late-type disks, ultra-compact dwarfs, and galaxy spheroids spanning the range from low-mass cusp bulges and ellipticals to massive core ellipticals. We show that in all cases the maximum stellar surface density attained in the central regions of these systems is similar, Sigma_max ~ 10^11 M_sun/kpc^2 (~20 g/cm^2), despite the fact that the systems span 7 orders of magnitude in total stellar mass M_star, 5 in effective radius R_e, and have a wide range in effective surface density M_star/R_e^2. The surface density limit is reached on a wide variety of physical scales in different systems and is thus not a limit on three-dimensional stellar density. Given the very different formation mechanisms involved in these different classes of objects, we argue that a single piece of physics likely determines Sigma_max. The radiation fields and winds produced by massive stars can have a significant influence on the formation of both star clusters and galaxies, while neither supernovae nor black hole accretion are important in star cluster formation. We thus conclude that feedback from massive stars likely accounts for the observed Sigma_max, plausibly because star formation reaches an Eddington-like flux that regulates the growth of these diverse systems. This suggests that current models of galaxy formation, which focus on feedback from supernovae and active galactic nuclei, are missing a crucial ingredient.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
