Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userLow temperature FIR and submm mass absorption coefficient of interstellar silicate dust analogues
249
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
Cold dust grains emission in the FIR/submm is usually expressed as a modified black body law in which the dust mass absorption coefficient (MAC), is described with a temperature- and wavelength-independent emissivity spectral index, beta. However, numerous data from space and balloon-born missions and recently from Herschel and Planck show that dust emission is not well understood, as revealed by the observed anti-correlation of beta with the grain temperature. In order to give astronomers the necessary data to interpret FIR/submm observations, we synthesised analogues of interstellar amorphous and crystalline silicate grains, rich in Mg and Ca, and having stiochiometry of olivine and pyroxene and measured their MAC, in the 100-1000/1500 mum range for grain temperatures varying from 300 to 10 K. We find that the grain MAC decreases when the grain temperature decreases and that the local spectral index, beta, defined as the slope of the MAC curve, is anti-correlated with the grain temperature. These variations, which are not observed in the crystallised samples, are related to the amorphous nature of the samples. In addition, the spectral shape of the MAC is complex: at short wavelengths (lambda < 500/700 mum), beta is in the range 1.6 - 2.1 for all grain temperature and grain composition whereas at longer wavelengths (lambda > 500/700 mum), beta < 2 for samples with a pyroxene stoichiometry and beta > 2 for samples with an olivine stoichiometry. Hence, the simplifying asymptotic expression based on a single temperature- and wavelength-independent spectral index used by astronomers is not appropriate to describe the dust MAC and thus the dust emission, and may induce significant errors on the derived parameters such as the dust mass and the dust physical and chemical properties. Instead, dust emission models should use the dust MAC as a function of wavelength and temperature.
rate research
Read More
A wealth of data from the Herschel and Planck satellites and now from ALMA, revealing cold dust thermal emission, is available for astronomical environments ranging from interstellar clouds, cold clumps, circumstellar envelops, and protoplanetary disks. The interpretation of these observations relies on the understanding and modeling of cold dust emission and on the knowledge of the dust optical properties. The aim of this work is to provide astronomers with a set of spectroscopic data of realistic interstellar dust analogues that can be used to interpret the observations. Glassy silicates of mean composition (1-x)MgO - xSiO2 with x = 0.35, 0.40 and 0.50 were synthesized. The mass absorption coefficient (MAC) of the samples was measured in the spectral domain 30 - 1000 $mu$m for grain temperature in the range 300 K - 10 K and at room temperature in the 5 - 40 $mu$m domain. We find that the MAC of all samples varies with the grains temperature. In the FIR/submm, and above 30K, the MAC value at a given wavelength increases with the temperature as thermally activated absorption processes appear. The studied materials exhibit different and complex behaviors at long wavelengths (lambda $geq$ 200 to 700 $mu$m depending on the samples) and the MAC cannot be approximated by a single power law in ${lambda}^{-beta}$. These behaviors are attributed to the amorphous nature of dust and to the amount and nature of the defects within this amorphous structure. Above 20 $mu$m, the measured MAC are much higher than the MAC calculated from interstellar silicate dust models indicating that the analogues measured in this study are more emissive than the silicates in cosmic dust models. This has important astrophysical implications because masses are overestimated by the models. Moreover, constraints on elemental abundance of heavy elements in cosmic dust models are relaxed
To model the cold dust emission observed in the diffuse interstellar medium, in dense molecular clouds or in cold clumps that could eventually form new stars, it is mandatory to know the physical and spectroscopic properties of this dust and to understand its emission. This work is a continuation of previous studies aiming at providing astronomers with spectroscopic data of realistic cosmic dust analogues for the interpretation of observations. Ferromagnesium amorphous silicate dust analogues were produced with a mean composition close to $mathrm{Mg_{1-x}Fe_{x}SiO_3}$ with x = 0.1, 0.2, 0.3, 0.4. Part of each sample was annealed at 500$^{circ}$C for two hours in a reducing atmosphere to modify the oxidation state of iron. We have measured the mass absorption coefficient (MAC) of these ferromagnesium amorphous silicate dust analogues in the spectral domain 30 - 1000 $mu$m for grain temperature in the range 10 - 300 K and at room temperature in the 5 - 40 $mu$m range. The MAC of ferromagnesium samples behaves in the same way as the MAC of pure Mg-rich amorphous silicate samples. In the 30 - 300 K range, the MAC increases with increasing grain temperature whereas in the range 10 - 30 K, we do not see any change of the MAC. The MAC cannot be described by a single power law in ${lambda}^{-beta}$. The MAC of all the samples is much higher than the MAC calculated by dust models. The complex behavior of the MAC of amorphous silicates with wavelength and temperature is observed whatever the exact silicate composition (Mg vs. Fe amount). It is a universal characteristic of amorphous materials, and therefore of amorphous cosmic silicates, that should be taken into account in astronomical modeling. The enhanced MAC of the measured samples compared to the MAC calculated for cosmic dust model implies that dust masses are overestimated by the models.
We report the detection of interstellar silicate dust in the z_abs=0.685 absorber along the sightline toward the gravitationally lensed blazar TXS 0218+357. Using Spitzer Space Telescope Infrared Spectrograph data we detect the 10 micron silicate absorption feature with a detection significance of 10.7-sigma. We fit laboratory-derived silicate dust profile templates obtained from literature to the observed 10 micron absorption feature, and find that the best single-mineral fit is obtained using an amorphous olivine template with a measured peak optical depth of tau_10=0.49+/-0.02, which rises to tau_10~0.67+/-0.04 if the covering factor is taken into account. We also detected the 18 micron silicate absorption feature in our data with a >3-sigma significance. Due to the proximity of the 18 micron absorption feature to the edge of our covered spectral range, and associated uncertainty about the shape of the quasar continuum normalization near 18 micron, we do not independently fit this feature. We find, however, that the shape and depth of the 18 micron silicate absorption are well-matched to the amorphous olivine template prediction, given the optical depth inferred for the 10 micron feature. The measured 10 micron peak optical depth in this absorber is significantly higher than those found in previously studied quasar absorption systems. The reddening, 21-cm absorption, and velocity spread of Mg II are not outliers relative to other studied absorption systems, however. This high optical depth may be evidence for variations in dust grain properties in the ISM between this and the previously studied high redshift galaxies.
We explore the origin of mid-infrared (mid-IR) dust extinction in all 20 nearby (z < 0.05) bona-fide Compton-thick (N_H > 1.5 x 10^24 cm^-2) AGN with hard energy (E > 10 keV) X-ray spectral measurements. We accurately measure the silicate absorption features at lambda~9.7um in archival low-resolution (R~57-127) Spitzer Infrared Spectrograph (IRS) spectroscopy, and show that only a minority (~45%) of nearby Compton-thick AGN have strong Si-absorption features (S_9.7 = ln(f_{int}/f_{obs}) > 0.5) which would indicate significant dust attenuation. The majority (~60%) are star-formation dominated (AGN:SB<0.5) at mid-IR wavelengths and lack the spectral signatures of AGN activity at optical wavelengths, most likely because the AGN emission-lines are optically-extinguished. Those Compton-thick AGN hosted in low-inclination angle galaxies exhibit a narrow-range in Si-absorption (S_9.7 ~ 0-0.3), which is consistent with that predicted by clumpy-torus models. However, on the basis of the IR spectra and additional lines of evidence, we conclude that the dominant contribution to the observed mid-IR dust extinction is dust located in the host galaxy (i.e., due to disturbed morphologies; dust-lanes; galaxy inclination angles) and not necessarily a compact obscuring torus surrounding the central engine.
The dust mass absorption coefficient, $kappa_{d}$, is the conversion function used to infer physical dust masses from observations of dust emission. However, it is notoriously poorly constrained, and it is highly uncertain how it varies, either between or within galaxies. Here we present the results of a proof-of concept study, using the DustPedia data for two nearby face-on spiral galaxies M74 (NGC 628) and M83 (NGC 5236), to create the first ever maps of $kappa_{d}$ in galaxies. We determine $kappa_{d}$ using an empirical method that exploits the fact that the dust-to-metals ratio of the interstellar medium is constrained by direct measurements of the depletion of gas-phase metals. We apply this method pixel-by-pixel within M74 and M83, to create maps of $kappa_{d}$. We also demonstrate a novel method of producing metallicity maps for galaxies with irregularly-sampled measurements, using the machine learning technique of Gaussian process regression. We find strong evidence for significant variation in $kappa_{d}$. We find values of $kappa_{d}$ at 500 $mu$m spanning the range 0.11-0.25 ${rm m^{2},kg^{-1}}$ in M74, and 0.15-0.80 ${rm m^{2},kg^{-1}}$ in M83. Surprisingly, we find that $kappa_{d}$ shows a distinct inverse correlation with the local density of the interstellar medium. This inverse correlation is the opposite of what is predicted by standard dust models. However, we find this relationship to be robust against a large range of changes to our method - only the adoption of unphysical or highly unusual assumptions would be able to suppress it.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
