Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userDiffusion stop-layers for superconducting integrated circuits and qubits with Nb-based Josephson junctions
239
0
0.0
(
0
)
Authors
Sergey K. Tolpygo
Ask ChatGPT about the research
No Arabic abstract
New technology for superconductor integrated circuits has been developed and is presented. It employs diffusion stoplayers (DSLs) to protect Josephson junctions (JJs) from interlayer migration of impurities, improve JJ critical current (Ic) targeting and reproducibility, eliminate aging, and eliminate pattern-dependent effects in Ic and tunneling characteristics of Nb/Al/AlOx/Nb junctions in integrated circuits. The latter effects were recently found in Nb-based JJs integrated into multilayered digital circuits. E.g., it was found that Josephson critical current density (Jc) may depend on the JJs environment, on the type and size of metal layers making contact to niobium base (BE) and counter electrodes (CE) of the junction, and also change with time. Such Jc variations within a circuit reduce circuit performance and yield, and restrict integration scale. This variability of JJs is explained as caused by hydrogen contamination of Nb layers during wafer processing, which changes the height and structural properties of AlOx tunnel barrier. Redistribution of hydrogen impurities between JJ electrodes and other circuit layers by diffusion along Nb wires and through contacts between layers causes long-term drift of Jc. At least two DSLs are required to completely protect JJs from impurity diffusion effects - right below the junction BE and right above the junction CE. The simplest and the most technologically convenient DSLs we have found are thin (from 3 nm to 10 nm) layers of Al. They were deposited in-situ under the BE layer, thus forming an Al/Nb/Al/AlOx/Nb penta-layer, and under the first wiring layer to junctions CE, thus forming an Al/Nb wiring bi-layer. A significant improvement of Jc uniformity on 150-mm wafer has also been obtained along with large improvements in Jc targeting and run-to-run reproducibility.
rate research
Read More
Magnetic flux quantization in superconductors allows the implementation of fast and energy-efficient digital superconducting circuits. However, the information representation in magnetic flux severely limits their functional density presenting a long-standing problem. Here we introduce a concept of superconducting digital circuits that do not utilize magnetic flux and have no inductors. We argue that neither the use of geometrical nor kinetic inductance is promising for the deep scaling of superconducting circuits. The key idea of our approach is the utilization of bistable Josephson junctions allowing the representation of information in their Josephson energy. Since the proposed circuits are composed of Josephson junctions only, they can be called all-Josephson junction (all-JJ) circuits. We present a methodology for the design of the circuits consisting of conventional and bistable junctions. We analyze the principles of the circuit functioning, ranging from simple logic cells and ending with an 8-bit parallel adder. The utilization of bistable junctions in the all-JJ circuits is promising in the aspects of simplification of schematics and the decrease of the JJ count leading to space-efficiency.
We have studied low-frequency resistance fluctuations in shadow-evaporated Al/AlOx/Al tunnel junctions. Between 300 K and 5 K the spectral density follows a 1/f-law. Below 5 K, individual defects distort the 1/f-shape of the spectrum. The spectral density decreases linearly with temperature between 150 K and 1 K and saturates below 0.8 K. At 4.2 K, the spectral density is about two orders of magnitude lower than expected from a recent survey [D. J. Van Harlingen et al., Phys. Rev. B 70, 064510 (2004)]. Due to the saturation below 0.8 K the estimated qubit dephasing times at 100 mK are only about two times longer than calculated by Van Harlingen et al.
Electrical properties of Josephson junctions Nb/FeSi/Nb with superconductor/ferromagnet (S/F)interfaces are presented. Due to Andreev reflection the nearly exact quadruple enhancement of the tunnel junction differential conductance compared with that of the normal state was achieved. The transparency of the S/F interfaces in our junctions was estimated to be close to unity. This almost ideal value is obtained due to the use of a very smooth amorphous magnetic FeSi alloy for the barrier preparation. The real structure of the Nb/FeSi/Nb tunnel junction is described as a S/F/I/F/S junction. Also Nb/FeSi/Si/Nb Josephson junctions were investigated and the results found on these junctions confirm the effects observed in Nb/FeSi/Nb.
Highly transmissive ballistic junctions are demonstrated between Nb and the two-dimensional electron gas formed at an InAs/AlSb heterojunction. A reproducible fabrication protocol is presented yielding high critical supercurrent values. Current-voltage characteristics were measured down to 0.4 K and the observed supercurrent behavior was analyzed within a ballistic model in the clean limit. This investigation allows us to demonstrate an intrinsic interface transmissivity approaching 90%. The reproducibility of the fabrication protocol makes it of interest for the experimental study of InAs-based superconductor-semiconductor hybrid devices.
The physics of the $pi$ phase shift in ferromagnetic Josephson junctions may enable a range of applications for spin-electronic devices and quantum computing. We investigate transitions from ``0 to ``$pi$ states in Nb/Fe/Nb Josephson junctions by varying the Fe barrier thickness from 0.5 nm to 5.5 nm. From magnetic measurements we estimate for Fe a magnetic dead layer of about 1.1 nm. By fitting the characteristic voltage oscillations with existing theoretical models we extrapolate an exchange energy of 256 meV, a Fermi velocity of $1.98 times 10^5$ m/s and an electron mean free path of 6.2 nm, in agreement with other reported values. From the temperature dependence of the $I_CR_N$ product we show that its decay rate exhibits a nonmonotonic oscillatory behavior with the Fe barrier thickness.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
