Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userTemperature Dependence of the Dynamics of Portevin-Le Chatelier Effect in Al-2.5%Mg alloy
137
0
0.0
(
0
)
Added by
Arnomitra Chatterjee
Publication date
2010
fields
Physics
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Tensile tests were carried out by deforming polycrystalline samples of Al-2.5%Mg alloy at four different temperatures in an intermediate strain rate regime of 2x10-4s-1 to 2x10-3s-1. The Portevin-Le Chatelier (PLC) effect was observed throughout the strain rate and temperature region. The mean cumulative stress drop magnitude and the mean reloading time exhibit an increasing trend with temperature which is attributed to the enhanced solute diffusion at higher temperature. The observed stress-time series data were analyzed using the nonlinear dynamical methods. From the analyses, we could establish the presence of deterministic chaos in the PLC effect throughout the temperature regime. The dynamics goes to higher dimension at a sufficiently high temperature of 425K but the complexity of the dynamics is not affected by the temperature.
rate research
Read More
The scaling behavior of the Portevin-Le Chatelier (PLC) effect was studied by deforming Al-2.5%Mg alloy for a wide range of strain rates. To reveal the exact scaling nature, the time series data of true stress vs. time, obtained during deformation, were analyzed by two complementary methods: the finite variance scaling method and the diffusion entropy analysis. From these analyses we could establish that in the entire span of strain rates, PLC effect showed Levy walk property.
The complexity of the Portevin-Le Chatelier effect in Al-2.5%Mg polycrystalline samples subjected to uniaxial tensile tests is quantified. Multiscale entropy analysis is carried out on the stress time series data observed during jerky flow to quantify the complexity of the distinct spatiotemporal dynamical regimes. It is shown that for the static type C band, the entropy is very low for all the scales compared to the hopping type B and the propagating type A bands. The results are interpreted considering the time and length scales relevant to the effect.
The Portevin-Le Chatelier(PLC) effect has been investigated by deforming Al-2.5%Mg alloy in the strain rate regime where simultaneously two types (type B and type A) of serrations appear in the stress strain curve. Our analysis reveal that in this strain rate regime the entire PLC dynamics for a particular strain rate experiment is governed by a single band which changes its character during the deformation.
The scaling behavior of the Portevin-Le Chatelier (PLC) effect is studied by deforming a substitutional alloy, Al-2.5%Mg and an interstitial alloy, low carbon steel (0.15%C, 0.33%Mn, 0.04%P, 0.05%S, 0.15%Si and rest Iron) at room temperature for a wide range of strain rates. To reveal the exact scaling nature, the time series data of true stress vs. time, obtained during the tensile deformation (corrected for drift due to strain hardening by polynomial fitting method), are analyzed by two complementary methods: the standard deviation analysis and the diffusion entropy analysis. From these analyses we could establish that in the entire span of strain rates, PLC effect showed Levy walk type of scaling property.
Tensile tests have been carried out by deforming polycrystalline samples of substitutional Al-2.5%Mg alloy at room temperature at a range of strain rates. The Portevin - Le Chatelier (PLC) effect was observed. From an analysis of the experimental stress versus time series data we have inferred that the dynamics of the PLC effect in a local finite time is controlled by a finite number of degrees of freedom and this effective dimension becomes reduced with increasing strain.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
