Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userScaler Mode Technique for the ARGO-YBJ Detector
103
0
0.0
(
0
)
Added by
Giuseppe Di Sciascio
Publication date
2008
fields
Physics
and research's language is
English
Authors
G. Aielli et al.
Ask ChatGPT about the research
No Arabic abstract
The ARGO-YBJ experiment has been designed to study the Extensive Air Showers with an energy threshold lower than that of the existing arrays by exploiting the high altitude location(4300 m a.s.l. in Tibet, P.R. China) and the full ground plane coverage. The lower energy limit of the detector (E $sim$ 1 GeV) is reached by the scaler mode technique, i.e. recording the counting rate at fixed time intervals. At these energies, transient signals due to local (e.g. Forbush Decreases) and cosmological (e.g. Gamma Ray Bursts) phenomena are expected as a significant variation of the counting rate compared to the background. In this paper the performance of the ARGO-YBJ detector operating in scaler mode is described and discussed.
rate research
Read More
We report on the search for Gamma Ray Bursts (GRBs) in the energy range 1-100 GeV in coincidence with the prompt emission detected by satellites using the Astrophysical Radiation with Ground-based Observatory at YangBaJing (ARGO-YBJ) air shower detector. Thanks to its mountain location (Yangbajing, Tibet, P.R. China, 4300 m a.s.l.), active surface (about 6700 m**2 of Resistive Plate Chambers), and large field of view (about 2 sr, limited only by the atmospheric absorption), the ARGO-YBJ air shower detector is particularly suitable for the detection of unpredictable and short duration events such as GRBs. The search is carried out using the single particle technique, i.e. counting all the particles hitting the detector without measurement of the energy and arrival direction of the primary gamma rays. Between 2004 December 17 and 2009 April 7, 81 GRBs detected by satellites occurred within the field of view of ARGO-YBJ (zenith angle < 45 deg). It was possible to examine 62 of these for >1 GeV counterpart in the ARGO-YBJ data finding no statistically significant emission. With a lack of detected spectra in this energy range fluence upper limits are profitable, especially when the redshift is known and the correction for the extragalactic absorption can be considered. The obtained fluence upper limits reach values as low as 10**{-5} erg cm**{-2} in the 1-100 GeV energy region. Besides this individual search for a higher energy counterpart, a statistical study of the stack of all the GRBs both in time and in phase was made, looking for a common feature in the GRB high energy emission. No significant signal has been detected.
The ARGO-YBJ detector, located at the Yangbajing Cosmic Ray Laboratory (4300 m a. s. l., Tibet, China), was a full coverage air shower array dedicated to gamma ray astronomy and cosmic ray studies. The wide field of view (~ 2 sr) and high duty cycle (> 86%), made ARGO-YBJ suitable to search for short and unexpected gamma ray emissions like gamma ray bursts (GRBs). Between 2007 November 6 and 2013 February 7, 156 satellite-triggered GRBs (24 of them with known redshift) occurred within the ARGO-YBJ field of view. A search for possible emission associated to these GRBs has been made in the two energy ranges 10-100 GeV and 10-1000 GeV. No significant excess has been found in time coincidence with the satellite detections nor in a time window of one hour after the bursts. Taking into account the EBL absorption, upper limits to the energy fluence at 99% of confidence level have been evaluated,with values ranging from ~ 10-5 erg cm-2 to ~10-1 erg cm-2.
The ARGO-YBJ experiment has been designed to detect air shower events over a large size scale and with an energy threshold of a few hundreds GeV. The building blocks of the ARGO-YBJ detector are single-gap Resistive Plate Counters (RPCs). The trigger logic selects the events on the basis of their hit multiplicity. Inclusive triggers as well as dedicated triggers for specific physics channels or calibration purposes have been developed. This paper describes the architecture and the main features of the trigger system.
The ARGO-YBJ experiment is a full coverage EAS-array installed at the YangBaJing Cosmic Ray Laboratory (4300 m a.s.l., Tibet, P.R. China). We present the results on the angular resolution measured with different methods with the full central carpet. The comparison of experimental results with MC simulations is discussed.
In any EAS array, the rejection of events with shower cores outside the detector boundaries is of great importance. A large difference between the true and the reconstructed shower core positions may lead to a systematic miscalculation of some shower characteristics. Moreover, an accurate determination of the shower core position for selected internal events is important to reconstruct the primary direction using conical fits to the shower front, improving the detector angular resolution, or to performe an efficient gamma/hadron discrimination. In this paper we present a procedure able to identify and reject showers with cores outside the ARGO-YBJ carpet boundaries. A comparison of the results for gamma and proton induced showers is reported.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
