Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userA temperature-controlled device for volumetric measurements of Helium adsorption in porous media
112
0
0.0
(
0
)
Added by
Pierre-Etienne Wolf
Publication date
2008
fields
Physics
and research's language is
English
Authors
Benjamin Cross
Ask ChatGPT about the research
No Arabic abstract
We describe a set-up for studying adsorption of helium in silica aerogels, where the adsorbed amount is easily and precisely controlled by varying the temperature of a gas reservoir between 80 K and 180 K. We present validation experiments and a first application to aerogels. This device is well adapted to study hysteresis, relaxation, and metastable states in the adsorption and desorption of fluids in porous media.
rate research
Read More
We present the architecture of the versatile NMR spectrometer with software-defined radio (SDR) technology and its application to the dynamically controlled pulsed magnetic fields. The pulse-field technology is the only solution to access magnetic fields greater than 50 T, but the NMR experiment in the pulsed magnetic field was difficult because of the continuously changing field strength. The dynamically controlled field pulse allows us to perform NMR experiment in a quasi-steady field condition by creating a constant magnetic field for a short time around the peak of the field pulse. We confirmed the reproducibility of the field pulses using the NMR spectroscopy as a high precision magnetometer. With the highly reproducible field strength we succeeded in measuring the nuclear spin-lattice relaxation rate $1/T_1$, which had never been measured by the pulse-field NMR experiment without dynamic field control. We also implement the NMR spectrum measurement with both the frequency-sweep and field-sweep modes and discuss the appropriate choice of these modes depending on the magnetic properties of sample to be measured. This development, with further improvement at a long-duration field pulse, will innovate the microscopic measurement in extremely high magnetic fields.
In situ observation of precipitation or phase separation induced by solvent addition is important in studying its dynamics. Combined with optical and fluorescence microscopy, microfluidic devices have been leveraged in studying the phase separation in various materials including biominerals, nanoparticles, and inorganic crystals. However, strong scattering from the subphases in the mixture is problematic for in situ study of phase separation with high temporal and spatial resolution. In this work, we present a quasi-2D microfluidic device combined with total internal reflection microscopy as an approach for in situ observation of phase separation. The quasi-2D microfluidic device comprises of a shallow main channel and a deep side channel. Mixing between a solution in the main channel (solution A) and another solution (solution B) in the side channel is predominantly driven by diffusion due to high fluid resistance from the shallow height of the main channel, which is confirmed using fluorescence microscopy. Moreover, relying on diffusive mixing, we can control the composition of the mixture in the main channel by tuning the composition of solution B. We demonstrate the application of our method for in situ observation of asphaltene precipitation and beta-alanine crystallization.
The motion of active polymers in a porous medium is shown to depend critically on flexibilty, activity and degree of polymerization. For given Peclet number, we observe a transition from localisation to diffusion as the stiffness of the chains is increased. Whereas stiff chains move almost unhindered through the porous medium, flexible ones spiral and get stuck. Their motion can be accounted for by the model of a continuous time random walk with a renewal process corresponding to unspiraling. The waiting time distribution is shown to develop heavy tails for decreasing stiffness, resulting in subdiffusive and ultimately caged behaviour.
Porous media with hierarchical structures are commonly encountered in both natural and synthetic materials, e.g., fractured rock formations, porous electrodes and fibrous materials, which generally consist of two or more distinguishable levels of pore structure with different characteristic lengths. The multiphase flow behaviours in hierarchical porous media have remained elusive. In this study, we investigate the influences of hierarchical structures in porous media on the dynamics of immiscible fingering during fluid-fluid displacement. By conducting a series of numerical simulations, we found that the immiscible fingering can be suppressed due to the existence of secondary porous structures. To characterise the fingering dynamics in hierarchical porous media, a phase diagram is constructed by introducing a scaling parameter, i.e., the ratio of time scales considering the combined effect of characteristic pore sizes and wettability. The findings present in this work provide a basis for further research on the application of hierarchical porous media for controlling immiscible fingerings.
The size- and fluorescence-based sorting of micro- and nano-scale particles suspended in fluid presents a significant and important challenge for both sample analysis and for manufacturing of nanoparticle-based products. Here we demonstrate a disposable microfluidic particle sorter that enables high-throughput, on-demand counting and binary sorting of sub-micron particles and cells, using either fluorescence or an electrically-based determination of particle size. Size-based sorting uses a resistive pulse sensor integrated on-chip, while fluorescence-based discrimination is achieved using on-the-fly optical image capture and analysis. Following detection and analysis, the individual particles are deflected using a pair of piezoelectric actuators, directing the particles into one of two desired output channels; the main flow goes into a third waste channel. The integrated system can achieve sorting fidelities of better than 98%, and the mechanism can successfully count and actuate, on demand, more than 60,000 particles/min.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
