Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userCover slip external cavity diode laser
331
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
The design of a 671 nm diode laser with a mode-hop-free tuning range of 40 GHz is described. This long tuning range is achieved by simultaneously ramping the external cavity length with the laser injection current. The external cavity consists of a microscope cover slip mounted on piezoelectric actuators. In such a configuration the laser output pointing remains fixed, independent of its frequency. Using a diode with an output power of 5-7 mW, the laser linewidth was found to be smaller than 30 MHz. This cover slip cavity and feedforward laser current control system is simple, economical, robust, and easy to use for spectroscopy, as we demonstrate with lithium vapor and lithium atom beam experiments.
rate research
Read More
We describe passive phase-locking architectures based on external-cavity setups to improve the brightness of diode laser bars. Volume Bragg gratings are used to stabilize the lase line. Numerical modelling and experimental results will be presented.
Two extended cavity laser diodes are phase-locked, thanks to an intra-cavity electro-optical modulator. The phase-locked loop bandwidth is on the order of 10 MHz, which is about twice larger than when the feedback correction is applied on the laser current. The phase noise reaches -120 dBrad$^2$/Hz at 10 kHz. This new scheme reduces the residual laser phase noise, which constitutes one of the dominant contributions in the sensitivity limit of atom interferometers using two-photon transitions.
We report on converting the multimode hopping oscillation (MHO) in long-wavelength semiconductor laser into single-mode oscillation (SMO) by applying external optical feedback (OFB). We characterize and compare the noise performance of the laser when supporting SMO and multimode oscillations. The study is based on a modified time-delay multimode rate-equation model of the laser that includes mechanisms of spectral gain suppression along with OFB induced due to multiple reflections by an external reflector. The study is applied to 1.55um-InGaAsP laser that exhibits multimode hopping in its solitary version and supports wide bandwidth. The noise is evaluated in terms of the relative intensity noise (RIN). We show that when OFB synchronizes with the asymmetric gain suppression (AGS), it enhances the gain of one longer wavelength mode and supports SMO. In this case OFB improves the noise performance of the laser. On the other hand, when OFB works against AGS, it sustains hopping multimode oscillation (HMMO) and deteriorates the side-mode suppression ratio (SMSR) and the noise performance.
We demonstrate an external cavity laser formed by combining a silicon nitride photonic integrated circuit with a reflective semiconductor optical amplifier. The laser uses an alignment tolerant edge coupler formed by a multi-mode waveguide splitter right at the edge of the silicon nitride chip that relaxes the required alignment to the III-V gain chip and equally splits the power among its two output waveguides. Both the ground and first order mode are excited in the coupler and reach the quadrature condition at the waveguide junction, ensuring equal power to be coupled to both. Two high-quality-factor ring resonators arranged in Vernier configuration close a Sagnac loop between the two waveguides. In addition to wideband frequency tuning, they result in a longer effective cavity length. The alignment tolerant coupler increases the alignment tolerance in the two directions parallel to the chip surface by a factor 3 relative to conventional edge couplers, making it ideal for gain chip integration via pick-and-place technology. Lasing is maintained in a misalignment range of $pm$6 $mu$m in the direction along the edge of the chip. A Lorentzian laser linewidth of 42 kHz is achieved.
Self-mode-locking has become an emerging path to the generation of ultrashort pulses with vertical-external-cavity surface-emitting lasers. In our work, a strong Kerr nonlinearity that is so far assumed to give rise to mode-locked operation is evidenced and a strong nonlinearity enhancement by the microcavity is revealed. We present wavelength-dependent measurements of the nonlinear absorption and nonlinear-refractive-index change in a gain chip using the Z-scan technique. We report negative nonlinear refraction up to 1.5E-11 cm2/W in magnitude in the (InGa)As/Ga(AsP) material system close to the laser design wavelength, which can lead to Kerr lensing. We show that by changing the angle of incidence of the probe beam with respect to the gain chip, the Kerr nonlinearity can be wavelength-tuned, shifting with the microcavity resonance. Such findings may ultimately lead to novel concepts with regard to tailored self-mode-locking behavior achievable by peculiar Kerr-lens chip designs for cost-effective, robust and compact fs-pulsed semiconductor lasers.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
