In this work, we report our multi-wavelength observations of the transverse oscillation of a large scale coronal loop with a length of 350 Mm. The oscillation was induced by a blowout coronal jet, which was related to a circular ribbon flare (CRF) in AR 12434 on 2015 October 16. We aim to determine the physical parameters in the coronal loop, including the Alfven speed and magnetic field strength. The jet induced kink oscillation was observed in extreme-ultraviolet (EUV) wavelengths by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO). Line of sight magnetograms were observed by the Helioseismic and Magnetic Imager (HMI) on board SDO. We took several slices along the loop to assemble time-distance diagrams, and used an exponentially decaying sine function to fit the decaying oscillation. The initial amplitude, period, and damping time of kink oscillation were obtained. Coronal seismology of the kink mode was applied to estimate the Alfven speed and magnetic field strength in the oscillating loop. In addition, we measured the magnetic field of the loop through non-linear force free field (NLFFF) modeling using the flux rope insertion method. The oscillation is most pronounced in AIA 171 and 131. The oscillation is almost in phase along the loop with a peak initial amplitude of 13.6 Mm, meaning that the oscillation belong to the fast standing kink mode. The oscillation lasts for 3.5 cycles with an average period of 462 s and average damping time of 976 s. The values of t/P lie in the range of 1.5-2.5. Based on coronal seismology, the Alfven speed in the oscillating loop is estimated to be 1210 km. Two independent methods are applied to calculate the magnetic field strength of the loop, resulting in 30043 G using the coronal seismology and 21123 G using the NLFFF modeling, respectively.
تحميل البحث