اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدAn experimental investigation of the laminar horseshoe vortex around an emerging obstacle
93
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
An emerging long obstacle placed in a boundary layer developing under a free-surface generates a complex horseshoe vortex (HSV) system, which is composed of a set of vortices exhibiting a rich variety of dynamics. The present experimental study examines such flow structure and characterizes precisely, using PIV measurements, the evolution of the HSV geometrical and dynamical properties over a wide range of dimensionless parameters (Reynolds number $Re_h in [750, 8300]$, boundary layer development ratio $h/delta in [1.25, 4.25]$ and obstacle aspect ratio $W/h in [0.67, 2.33]$). The dynamical study of the HSV is based on the categorization of the HSV vortices motion into an enhanced specific bi-dimensional typology, separating a coherent (due to vortex-vortex interactions) and an irregular evolution (due to appearance of small-scale instabilities). This precise categorization is made possible thanks to the use of vortex tracking methods applied on PIV measurements, A semi-empirical model for the HSV vortices motion is then proposed to highlight some important mechanisms of the HSV dynamics, as (i) the influence of the surrounding vortices on a vortex motion and (ii) the presence of a phase shift between the motion of all vortices. The study of the HSV geometrical properties (vortex position and characteristic lengths and frequencies) evolution with the flow parameters shows that strong dependencies exist between the streamwise extension of the HSV and the obstacle width, and between the HSV vortex number and its elongation. Comparison of these data with prior studies for immersed obstacles reveals that emerging obstacles lead to greater adverse pressure gradients and down-flows in front of the obstacle.
قيم البحث
اقرأ أيضاً
In a cylindrical container filled with an eutectic GaInSn alloy, an electro-vortex flow (EVF) is generated by the interaction of a non-uniform current with its own magnetic field. In this paper, we investigate the EVF phenomenon numerically and exper
imentally. Ultrasound Doppler Velocimetry (UDV) is applied to measure the velocity field in a cylindrical vessel. Second, we enhance an old numerical solver by taking into account the effect of Joule heating, and employ it for the numerical simulation of the EVF experiment. Special focus is laid on the role of the magnetic field, which is the combination of the current induced magnetic field and the external geomagnetic field. For getting a higher computational efficiency, the so-called parent-child mesh technique is applied in OpenFOAM when computing the electric potential, the current density and the temperature in the coupled solid-liquid conductor system. The results of the experiment are in good agreement with those of the simulation. This study may help to identify the factors that are essential for the EVF phenomenon, and for quantifying its role in liquid metal batteries.
Unsteady laminar vortex shedding over a circular cylinder is predicted using a deep learning technique, a generative adversarial network (GAN), with a particular emphasis on elucidating the potential of learning the solution of the Navier-Stokes equa
tions. Numerical simulations at two different Reynolds numbers with different time-step sizes are conducted to produce training datasets of flow field variables. Unsteady flow fields in the future at a Reynolds number which is not in the training datasets are predicted using a GAN. Predicted flow fields are found to qualitatively and quantitatively agree well with flow fields calculated by numerical simulations. The present study suggests that a deep learning technique can be utilized for prediction of laminar wake flow in lieu of solving the Navier-Stokes equations.
We study the deformation and transport of elastic fibers in a viscous Hele-Shaw flow with curved streamlines. The variations of the global velocity and orientation of the fiber follow closely those of the local flow velocity. The ratios of the curvat
ures of the fibers by the corresponding curvatures of the streamlines reflect a balance between elastic and viscous forces: this ratio is shown experimentally to be determined by a dimensionless {it Sperm number} $Sp$ combining the characteristic parameters of the flow (transverse velocity gradient, viscosity, fiber diameter/cell gap ratio) and those of the fiber (diameter, effective length, Youngs modulus). For short fibers, the effective length is that of the fiber; for long ones, it is equal to the transverse characteristic length of the flow. For $S_p lesssim 250$, the ratio of the curvatures increases linearly with $Sp$; For $S_p gtrsim 250$, the fiber reaches the same curvature as the streamlines.
Efficiently predicting the flowfield and load in aerodynamic shape optimisation remains a highly challenging and relevant task. Deep learning methods have been of particular interest for such problems, due to their success for solving inverse problem
s in other fields. In the present study, U-net based deep neural network (DNN) models are trained with high-fidelity datasets to infer flow fields, and then employed as surrogate models to carry out the shape optimisation problem, i.e. to find a drag minimal profile with a fixed cross-section area subjected to a two-dimensional steady laminar flow. A level-set method as well as Bezier-curve method are used to parameterise the shape, while trained neural networks in conjunction with automatic differentiation are utilized to calculate the gradient flow in the optimisation framework. The optimised shapes and drag force values calculated from the flowfields predicted by DNN models agree well with reference data obtained via a Navier-Stokes solver and from the literature, which demonstrates that the DNN models are capable of predicting not only flowfield but also yield satisfactory aerodynamic forces. This is particularly promising as the DNNs were not specifically trained to infer aerodynamic forces. In conjunction with the fast runtime, the DNN-based optimisation framework shows promise for general aerodynamic design problems.
We report the experimental observation of dynamical behavior of flowing complex plasma past a spherical obstacle. The experiment has been carried out in a $Pi$-shaped DC glow discharge experimental device using kaolin particles as the dust component
in a background of Argon plasma. A stationary dust cloud is formed by maintaining the pumping speed and gas flow rate. A spherical obstacle vertically mounted on the cathode tray acts as an obstacle to the flow of dust particles. The controlled dust flow is generated by reducing the mass flow of the neutrals through a mass flow controller. The flowing dust particles are repelled by the electrostatic field of the negatively charged sphere and a microparticle free region (dust void) is formed surrounding the obstacle. The far particles are attracted towards the floating obstacle and reflected back when they have arrived at a minimum distance, causing a ring shaped structure around the obstacle. We characterize the shape of this structure over a range of dust flow speeds and obstacle biases. For a supersonic flow of dust fluid around a negatively biased obstacle, a bow shock is formed on the upstream side of the sphere, while the generation of wave structures is observed on the downstream side for a particular range of flow velocities. Reynolds numbers in this case is estimated as $R_e gtrsim 50$. This wave structure reminds of the beginning of the formation of a Von-Karman vortex street. A physical picture for the observed structure based on ion-drag, neutral streaming and electric forces is discussed.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
