اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMt. Graham: Optical turbulence vertical distribution at standard and high vertical resolution
110
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
A characterization of the optical turbulence vertical distribution and all the main integrated astroclimatic parameters derived from the CN2 and the wind speed profiles above Mt. Graham is presented. The statistic includes measurements related to 43 nights done with a Generalized Scidar (GS) used in standard configuration with a vertical resolution of ~1 km on the whole 20-22 km and with the new technique (HVR-GS) in the first kilometer. The latter achieves a resolution of ~ 20-30 m in this region of the atmosphere. Measurements done in different periods of the year permit us to provide a seasonal variation analysis of the CN2. A discretized distribution of the typical CN2 profiles useful for the Ground Layer Adaptive Optics (GLAO) simulations is provided and a specific analysis for the LBT Laser Guide Star system ARGOS case is done including the calculation of the gray zones for J, H and K bands. Mt. Graham confirms to be an excellent site with median values of the seeing without dome contribution equal to 0.72, the isoplanatic angle equal to 2.5 and the wavefront coherence time equal to 4.8 msec. We provide a cumulative distribution of the percentage of turbulence developed below H* where H* is included in the (0,1 km) range. We find that 50% of the whole turbulence develops in the first 80 m from the ground. The turbulence decreasing rate is very similar to what has been observed above Mauna Kea.
قيم البحث
اقرأ أيضاً
We present the overview of the MOSE project (MOdeling ESO Sites) aiming at proving the feasibility of the forecast of the classical atmospherical parameters (wind speed intensity and direction, temperature, relative humidity) and the optical turbulen
ce OT (CN2 profiles and the most relevant integrated astro-climatic parameters derived from the CN2: the seeing, the isoplanatic angle, the wavefront coherence time) above the two ESO ground-based sites of Cerro Paranal and Cerro Armazones. The final outcome of the study is to investigate the opportunity to implement an automatic system for the forecast of these parameters at these sites. In this paper we present results related to the Meso-Nh model ability in reconstructing the vertical stratification of the atmospherical parameters along the 20 km above the ground. The very satisfactory performances shown by the model in reconstructing most of these parameters (and in particular the wind speed) put this tool of investigation as the most suitable to be used in astronomical observatories to support AO facilities and to calculate the temporal evolution of the wind speed and the wavefront coherence time at whatever temporal sampling. The further great advantage of this solution is that such estimates can be available in advance (order of some hours) with respect to the time of interest
As telescopes become larger, into the era of ~40 m Extremely Large Telescopes, the high- resolution vertical profile of the optical turbulence strength is critical for the validation, optimization and operation of optical systems. The velocity of atm
ospheric optical turbulence is an important parameter for several applications including astronomical adaptive optics systems. Here, we compare the vertical profile of the velocity of the atmospheric wind above La Palma by means of a comparison of Stereo-SCIntillation Detection And Ranging (Stereo- SCIDAR) with the Global Forecast System models and nearby balloon-borne radiosondes. We use these data to validate the automated optical turbulence velocity identification from the Stereo-SCIDAR instrument mounted on the 2.5 m Isaac Newton Telescope, La Palma. By comparing these data we infer that the turbulence velocity and the wind velocity are consistent and that the automated turbulence velocity identification of the Stereo-SCIDAR is precise. The turbulence velocities can be used to increase the sensitivity of the turbulence strength profiles, as weaker turbulence that may be misinterpreted as noise can be detected with a velocity vector. The turbulence velocities can also be used to increase the altitude resolution of a detected layer, as the altitude of the velocity vectors can be identified to a greater precision than the native resolution of the system. We also show examples of complex velocity structure within a turbulent layer caused by wind shear at the interface of atmospheric zones.
In a recent paper the authors presented an extended study aiming at simulating the classical meteorological parameters and the optical turbulence at Dome C during the winter with the atmospherical mesoscale model Meso-NH. A statistical analysis has b
een presented and the conclusions of that paper have been very promising. Wind speed and temperature fields revealed to be very well reconstructed by the Meso-NH model with better performances than what has been achieved with the European Centre for Medium-Range Weather Forecast (ECMWF) global model, especially near the surface. All results revealed to be resolution-dependent and it has been proved that a grid-nesting configuration (3 domains) with a high horizontal resolution (1km) for the innermost domain is necessary to reconstruct all the optical turbulence features with a good correlation to measurements. High resolution simulations provided an averaged surface layer thickness just ~14 m higher than what is estimated by measurements, the seeing in the free atmosphere showed a dispersion from the observed one of just a few hundredths of an arcsecond (~0.05). The unique limitation of the previous study was that the optical turbulence in the surface layer appeared overestimated by the model in both low and high resolution modes. In this study we present the results obtained with an improved numerical configuration. The same 15 nights have been simulated, and we show that the model results now match almost perfectly the observations in all their features: the surface thickness, the seeing in the free atmosphere as well as in the surface layer. This result permits us to investigate now other antarctic sites using a robust numerical model well adapted to the extreme polar conditions (Meso-NH).
Theoretical models of protoplanetary disks have shown the Vertical Shear Instability (VSI) to be a prime candidate to explain turbulence in the dead zone of the disk. However, simulations of the VSI have yet to show consistent levels of key disk turb
ulence parameters like the stress-to-pressure ratio $alpha$. We aim to reconcile these different values by performing a parameter study on the VSI with focus on the disk density gradient $p$ and aspect ratio $h := H/R$. We use full 2$pi$ 3D simulations of the disk for chosen set of both parameters. All simulations are evolved for 1000 reference orbits, at a resolution of 18 cells per h. We find that the saturated stress-to-pressure ratio in our simulations is dependent on the disk aspect ratio with a review{strong} scaling of $alphapropto h^{2.6}$, in contrast to the traditional $alpha$ model, where viscosity scales as $ u propto alpha h^2$ with a constant $alpha$. We also observe consistent formation of large scale vortices across all investigated parameters. The vortices show uniformly aspect ratios of $chi approx 10$ and radial widths of approximately 1.5 $H$. With our findings we can reconcile the different values reported for the stress-to-pressure ratio from both isothermal and radiation hydrodynamics models, and show long-term evolution effects of the VSI that could aide in the formation of planetesimals.
In this contribution I present results achieved recently in the field of the OT forecast that push further the limit of the accuracy of the OT forecasts and open to new perspectives in this field.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
