اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدPolarization Retarder with Cylindrical-Symmetry for Radially Polarized Light
320
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We demonstrate a cylindrically-symmetric polarization retarder for generating exact radially polarized light. It involves an uni-axial crystal whose crystallographic optics axis is aligned to its optical axis. This method offers high power-handling capability
قيم البحث
اقرأ أيضاً
We present a simple novel scheme that converts a Gaussian beam into an approximated radially polarized beam using coherent polarization manipulation together with Poynting walk-off in birefringent crystals. Our scheme alleviates the interferometric s
tability required by previous schemes that implemented this coherent mode summation using Mach-Zehnder-like interferometers. A symmetrical arrangement of two walk-off crystals with a half-wave plate, allows coherence control even when the laser has short temporal coherence length. We generated 14 watts of radially polarized beam from an Ytterbium fiber laser, only limited by the available fiber laser power.
A fast, switchable electro-optic radial polarization retarder (EO-RPR) fabricated using the electro-optic ceramic PMN-PT is presented. This EO-RPR is useful for fast, switchable generation of pure cylindrical vector beam. When used together with a pa
ir of half-wave plates, the EO-RPR can change circularly polarized light into any cylindrical vector beam of interest such as radially or azimuthally polarized light. Radially and azimuthally polarized light with purities greater than 95% are generated experimentally. The advantages of using EO-RPR include fast response times, low driving voltage and transparency in a wide spectral range (500 -7000 nm).
We have generated more than 100 watts of radial polarized beam from a Yb fiber laser using a photonics crystal segmented half-wave-plate. We demonstrated the high power handling capability of such a photonics crystal segmented half-wave-plate and sho
w that it is a promising external radial polarization converter for high power Yb fiber laser used in laser cutting industry.
The rich optical properties of transition metal dichalcogenide monolayers (TMD-MLs) render these materials promising candidates for the design of new optoelectronic devices. Despite the large number of excitonic complexes in TMD-MLs, the main focus h
as been put on optically bright neutral excitons. Spin-forbidden dark excitonic complexes have been addressed for basic science purposes, but not for applications. We report on spin-forbidden dark excitonic complexes in ML WSe$_2$ as an ideal system for the facile generation of radially polarized light beams. Furthermore, the spatially resolved polarization of photoluminescence beams can be exploited for basic research on excitons in two-dimensional materials.
We report the room-temperature electroluminescence (EL) with nearly pure circular polarization (CP) from GaAs-based spin-polarized light-emitting diodes (spin-LEDs). External magnetic fields are not used during device operation. There are two small s
chemes in the tested spin-LEDs: firstly, the stripe-laser-like structure that helps intensifying the EL light at the cleaved side walls below the spin injector Fe slab, and secondly, the crystalline AlOx spin tunnel barrier that ensures electrically stable device operation. The purity of CP is depressively low in the low current density (J) region, whereas it increases steeply and reaches close to the pure CP when J = 100 A/cm2. There, either right- or left-handed CP component is significantly suppressed depending on the direction of magnetization of the spin injector. Spin-dependent re-absorption, spin-induced birefringence and optical spin-axis conversion are suggested to account for the observed experimental results.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
