اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدThe Mysterious Lives Of Speckles. I. Residual atmospheric speckle lifetimes in ground-based coronagraphs
84
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
High-contrast imaging observations are fundamentally limited by the spatially and temporally correlated noise source called speckles. Suppression of speckle noise is the key goal of wavefront control and adaptive optics (AO), coronagraphy, and a host of post-processing techniques. Speckles average at a rate set by the statistical speckle lifetime, and speckle-limited integration time in long exposures is directly proportional to this lifetime. As progress continues in post-coronagraph wavefront control, residual atmospheric speckles will become the limiting noise source in high-contrast imaging, so a complete understanding of their statistical behavior is crucial to optimizing high-contrast imaging instruments. Here we present a novel power spectral density (PSD) method for calculating the lifetime, and develop a semi-analytic method for predicting intensity PSDs behind a coronagraph. Considering a frozen-flow turbulence model, we analyze the residual atmosphere speckle lifetimes in a MagAO-X-like AO system as well as 25--39 m giant segmented mirror telescope (GSMT) scale systems. We find that standard AO control shortens atmospheric speckle lifetime from ~130 ms to ~50 ms, and predictive control will further shorten the lifetime to ~20 ms on 6.5 m MagAO-X. We find that speckle lifetimes vary with diameter, wind speed, seeing, and location within the AO control region. On bright stars lifetimes remain within a rough range of ~20 ms to ~100 ms. Due to control system dynamics there are no simple scaling laws which apply across a wide range of system characteristics. Finally, we use these results to argue that telemetry-based post-processing should enable ground-based telescopes to achieve the photon-noise limit in high-contrast imaging.
قيم البحث
اقرأ أيضاً
Current and future high contrast imaging instruments aim to detect exoplanets at closer orbital separations, lower masses, and/or older ages than their predecessors, with the eventual goal of directly detecting terrestrial-mass habitable-zone exoplan
ets. However, continually evolving speckles in the coronagraphic science image still limit state-of-the-art ground-based exoplanet imaging instruments to contrasts at least two orders of magnitude worse than what is needed to achieve this goal. For ground-based adaptive optics (AO) instruments it remains challenging for most speckle suppression techniques to attenuate both the dynamic atmospheric and quasi-static instrumental speckles. We have proposed a focal plane wavefront sensing and control algorithm to address this challenge, called the Fast Atmospheric Self-coherent camera (SCC) Technique (FAST), which enables the SCC to operate down to millisecond timescales even when only a few photons are detected per speckle. Here we present preliminary experimental results of FAST on the Santa Cruz Extreme AO Laboratory (SEAL) testbed. In particular, we illustrate the benefit second stage AO-based focal plane wavefront control, demonstrating FAST closed-loop compensation of evolving residual atmospheric turbulence on millisecond-timescales.
In high-contrast space-based coronagraphs, one of the main limiting factors for imaging the dimmest exoplanets is the time varying nature of the residual starlight (speckles). Modern methods try to differentiate between the intensities of starlight a
nd other sources, but none incorporate models of space-based systems which can take into account actuations of the deformable mirrors. Instead, we propose formulating the estimation problem in terms of the electric field while allowing for dithering of the deformable mirrors. Our reduced-order approach is similar to intensity-based PCA (e.g. KLIP) although, under certain assumptions, it requires a considerably lower number of modes of the electric field. We illustrate this by a FALCO simulation of the WFIRST hybrid Lyot coronagraph.
Following the tracks of Malbet, Yu, & Shao (1995} on dark hole algorithms, we present analytical methods to measure and correct the speckle noise behind an ideal coronagraph. We show that, in a low aberration regime, wavefront sensing can be accompli
shed with only three images, the next image being fully corrected (no iterative process needed). The only hardware required is the coronagraph deformable mirror and an imaging detector in the focal plane, thus there are no non-common path errors to correct. Our first method, speckle field nulling, is a fast FFT-based algorithm requiring the deformable mirror influence functions to have identical shapes. Our second method, speckle energy minimization is more general and based on matrix inversion. Numerical simulations show that these methods can improve the contrast by several orders of magnitude.
The Characterising Exoplanet Satellite (CHEOPS) is a space mission designed to perform photometric observations of bright stars to obtain precise radii measurements of transiting planets. The high-precision photometry of CHEOPS relies on careful on-g
round calibration of its payload. For that purpose, intensive pre-launch campaigns of measurements were carried out to calibrate the instrument and characterise its photometric performances. We report on main results of these campaigns, provide a complete analysis of data sets and estimate in-flight photometric performance by mean of end-to-end simulation. The on-ground photometric stability of the instrument is found to be of the order of 15 parts per million over 5 hours. Our end-to-end simulation shows that measurements of planet-to-star radii ratio with CHEOPS can be determined with a precision of 2% for a Neptune-size planet transiting a K-dwarf star and 5% for an Earth-size planet orbiting a Sun-like star. It corresponds to signal-to-noise ratios on the transit depths of 25 and 10 respectively, allowing the characterisation and detection of these planets. The pre-launch CHEOPS performances are shown to be compliant with the mission requirements.
Atmosphere is one of the most important noise sources for ground-based cosmic microwave background (CMB) experiments. By increasing optical loading on the detectors, it amplifies their effective noise, while its fluctuations introduce spatial and tem
poral correlations between detected signals. We present a physically motivated 3d-model of the atmosphere total intensity emission in the millimeter and sub-millimeter wavelengths. We derive a new analytical estimate for the correlation between detectors time-ordered data as a function of the instrument and survey design, as well as several atmospheric parameters such as wind, relative humidity, temperature and turbulence characteristics. Using an original numerical computation, we examine the effect of each physical parameter on the correlations in the time series of a given experiment. We then use a parametric-likelihood approach to validate the modeling and estimate atmosphere parameters from the POLARBEAR-I project first season data set. We derive a new 1.0% upper limit on the linear polarization fraction of atmospheric emission. We also compare our results to previous studies and weather station measurements. The proposed model can be used for realistic simulations of future ground-based CMB observations.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
