اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدContinuous radio frequency electric-field detection through adjacent Rydberg resonance tuning
171
0
0.0
(
0
)
تأليف
Matthew T. Simons
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We demonstrate the use of multiple atomic-level Rydberg-atom schemes for continuous frequency detection of radio frequency (RF) fields. Resonant detection of RF fields by electromagnetically-induced transparency and Autler-Townes (AT) in Rydberg atoms is typically limited to frequencies within the narrow bandwidth of a Rydberg transition. By applying a second field resonant with an adjacent Rydberg transition, far-detuned fields can be detected through a two-photon resonance AT splitting. This two-photon AT splitting method is several orders of magnitude more sensitive than off-resonant detection using the Stark shift. We present the results of various experimental configurations and a theoretical analysis to illustrate the effectiveness of this multiple level scheme. These results show that this approach allows for the detection of frequencies in continuous band between resonances with adjacent Rydberg states.
قيم البحث
اقرأ أيضاً
We present a self-calibrating, SI-traceable broadband Rydberg-atom-based radio-frequency (RF) electric field probe (the Rydberg Field Probe or RFP) and measurement instrument (Rydberg Field Measurement System or RFMS). The RFMS comprises an atomic RF
field probe (RFP), connected by a ruggedized fiber-optic patch cord to a portable mainframe control unit with a software interface for RF measurement and analysis including real-time field readout and RF waveform visualization. The instrument employs electromagnetically induced transparency (EIT) readout of spectral signatures from RF-sensitive Rydberg states of an atomic vapor for continuous, pulsed, and modulated RF field measurement. The RFP exploits resonant and off-resonant Rydberg-field interactions to realize broadband RF measurements at frequencies ranging from ~10 MHz to sub-THz over a wide dynamic range. The RFMS incorporates an RF-field-free atomic reference and a laser-frequency tracker to ensure reliability and accuracy of the RF measurement. We characterize the RFP and measure polar field and polarization patterns of the RFP at 12.6 GHz RF in the far-field of a standard gain horn antenna. Measurements at 2.5 GHz are also performed. Measured patterns are in good agreement with simulations. A detailed calibration procedure and uncertainty analysis are presented that account for deviations from an isotropic response over a $4pi$ solid angle, arising from dielectric structures external to the atomic measurement volume. Contributions to the measurement uncertainty from the fundamental atomic measurement method and associated analysis as well as material, geometry, and hardware design choices are accounted for. A calibration (C) factor is used to establish absolute-standard SI-traceable calibration of the RFP. Pulsed and modulated RF field measurement, and time-domain RF-pulse waveform imaging are also demonstrated.
We demonstrate a new technique for detecting components of arbitrarily-shaped radio-frequency waveforms based on stroboscopic back-action evading measurements. We combine quantum non-demolition measurements and stroboscopic probing to detect waveform
components with magnetic sensitivity beyond the standard quantum limit. Using an ensemble of $1.5times 10^6$ cold rubidium atoms, we demonstrate entanglement-enhanced sensing of sinusoidal and linearly chirped waveforms, with 1.0(2)dB and 0.8(3)dB metrologically relevant noise reduction, respectively. We achieve volume-adjusted sensitivity of $deltarm{B}sqrt{V}approx 11.20~rm{fTsqrt{cm^3/Hz}}$, comparable to the best RF~magnetometers.
This work reports on the application of a novel electric field-ionization setup for high-resolution laser spectroscopy measurements on bunched fast atomic beams in a collinear geometry. In combination with multi-step resonant excitation to Rydberg st
ates using pulsed lasers, the field ionization technique demonstrates increased sensitivity for isotope separation and measurement of atomic parameters over non-resonant laser ionization methods. The setup was tested at the Collinear Resonance Ionization Spectroscopy experiment at ISOLDE-CERN to perform high-resolution measurements of transitions in the indium atom from the 5s$^2$5d~$^2$D$_{5/2}$ and 5s$^2$5d~$^2$D$_{3/2}$ states to 5s$^2$($n$)p~$^2$P and 5s$^2$($n$)f~$^2$F Rydberg states, up to a principal quantum number of $n$ = 72. The extracted Rydberg level energies were used to re-evaluate the ionization potential of the indium atom to be 46670.1055(21) cm$^{-1}$. The nuclear magnetic dipole and nuclear electric quadrupole hyperfine structure constants and level isotope shifts of the 5s$^2$5d~$^2$D$_{5/2}$ and 5s$^2$5d~$^2$D$_{3/2}$ states were determined for $^{113,115}$In. The results are compared to calculations using relativistic coupled-cluster theory. A good agreement is found with the ionization potential and isotope shifts, while disagreement of hyperfine structure constants indicates an increased importance of electron correlations in these excited atomic states. With the aim of further increasing the detection sensitivity for measurements on exotic isotopes, a systematic study of the field-ionization arrangement implemented in the work was performed and an improved design was simulated and is presented. The improved design offers increased background suppression independent of the distance from field ionization to ion detection.
In this article we describe the basic principles of Rydberg atom-based RF sensing and present the development of atomic pulsed RF detection and RF phase sensing establishing capabilities pertinent to applications in communications and sensing. To dat
e advances in Rydberg atom-based RF field sensors have been rooted in a method in which the fundamental physical quantity being detected and measured is the electric field amplitude, $E$, of the incident RF electromagnetic wave. The first part of this paper is focused on using atom-based $E$-field measurement for RF field-sensing and communications applications. With established phase-sensitive technologies, such as synthetic aperture radar (SAR) as well as emerging trends in phased-array antennas in 5G, a method is desired that allows robust, optical retrieval of the RF phase using an enhanced atom-based field sensor. In the second part of this paper we describe our fundamentally new atomic RF sensor and measurement method for the phase of the RF electromagnetic wave that affords all the performance advantages exhibited by the atomic sensor. The presented phase-sensitive RF field detection capability opens atomic RF sensor technology to a wide array of application areas including phase-modulated signal communication systems, radar, and field amplitude and phase mapping for near-field/far-field antenna characterizations.
We introduce a scheme to coherently suppress second-rank tensor frequency shifts in atomic clocks, relying on the continuous rotation of an external magnetic field during the free atomic state evolution in a Ramsey sequence. The method retrieves the
unperturbed frequency within a single interrogation cycle and is readily applicable to various atomic clock systems. For the frequency shift due to the electric quadrupole interaction, we experimentally demonstrate suppression by more than two orders of magnitude for the ${}^2S_{1/2} to {}^2D_{3/2}$ transition of a single trapped ${}^{171}text{Yb}^+$ ion. The scheme provides particular advantages in the case of the ${}^{171}text{Yb}^+$ ${}^2S_{1/2} to {}^2F_{7/2}$ electric octupole (E3) transition. For an improved estimate of the residual quadrupole shift for this transition, we measure the excited state electric quadrupole moments $Theta({}^2D_{3/2}) = 1.95(1)~ea_0^2$ and $Theta({}^2F_{7/2}) = -0.0297(5)~ea_0^2$ with $e$ the elementary charge and $a_0$ the Bohr radius, improving the measurement uncertainties by one order of magnitude.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
