اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدEvaluation of dynamic fracture toughness of a bonded bi-material interface subject to high-strain-rate shearing using digital image correlation
62
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
High-strain-rate shear tests were conducted on a three-layered bonded test piece comprising a central aluminum layer with PMMA resin layers bonded on both sides. Upon calculating the displacement field and the strain field using digital image correlation (DIC), the crack tip was located, and the fracture toughness was evaluated at the Aluminum/PMMA bonding interface. As a result of the DIC, it was possible to determine the process by which 1) the elastic stress wave propagated to the aluminum section, 2) the wave was transmitted to the PMMA section, and 3) the crack developed at the interface. The tip of the crack was identified using displacement distributions obtained using DIC. The fracture toughness of the interface was evaluated using the stress intensity factor. The true interfacial stress was calculated by correcting the strain value at the interface obtained using DIC. The distribution of the stress suggested that mode II fracture appears in the present test method when the crack is sufficiently shorter than the length of the bonding interface, and mode I and mode II fractures appear when the crack is longer in comparison. Although the value of the stress intensity factor was disturbed by the error of the DIC analysis, it was confirmed that the obtained values were similar regardless of the difference in the crack length, upon averaging the stress intensity factor values from the crack tips to the long-range with a ratio of 1 to the subset in DIC. As the obtained stress intensity factor value was similar to the values calculated in the related literature, it can be concluded that the method proposed in this study yields a reasonable stress intensity factor.
قيم البحث
اقرأ أيضاً
We examine the atomistic scale dependence of materials resistance-to-failure by numerical simulations and analytical analysis in electrical analogs of brittle crystals. We show that fracture toughness depends on the lattice geometry in a way incompat
ible with Griffiths relationship between fracture and free surface energy. Its value finds its origin in the matching between the continuum displacement field at the engineering scale, and the discrete nature of solids at the atomic scale. The generic asymptotic form taken by this field near the crack tip provides a solution for this matching, and subsequently a way to predict toughness from the atomistic parameters with application to graphene.
Tensile tests were conducted on dual-phase high-strength steel in a Split-Hopkinson Tension Bar at a strain-rate in the range of 150-600/s and in a servo-hydraulic testing machine at a strain-rate between 10-3 and 100/s. A novel specimen design was u
tilized for the Hopkinson bar tests of this sheet material. Digital image correlation was used together with high-speed photography to study strain localisation in the tensile specimens at high rates of strain. By using digital image correlation, it is possible to obtain in-plane displacement and strain fields during non-uniform deformation of the gauge section, and accordingly the strains associated with diffuse and localised necking may be determined. The full-field measurements in high strain-rate tests reveal that strain localisation started even before the maximum load was attained in the specimen. An elasto-viscoplastic constitutive model is used to predict the observed stress-strain behaviour and strain localisation for the dual-phase steel. Numerical simulations of dynamic tensile tests were performed using the non-linear explicit FE code LS-DYNA. Simulations were done with shell (plane stress) and brick elements. Good correlation between experiments and numerical predictions was achieved, in terms of engineering stress-strain behaviour, deformed geometry and strain fields. However, mesh density plays a role in the localisation of deformation in numerical simulations, particularly for the shell element analysis.
Among the interfacial transport modulations to the LaAlO3/SrTiO3 (LAO/STO) heterostructure, mechanical strain has been proven to be an effective approach by growing the LAO/STO films on different substrates with varying lattice mismatches to STO. How
ever, this lattice-mismatch-induced strain effect is static and biaxial, hindering the study of the strain effect in a dynamic way. In this work we realize dynamic and uniaxial strain to the LAO/STO oxide heterostructure at low temperature, through mechanical coupling from a magnetostrictive template. This anisotropic strain results in symmetry breaking at the interface and induces further splitting of the electronic band structure and therefore produces different conductivities along the x and y in-plane directions. In particular, we observe that along the strained direction the interface conductivity decreases by up to 70% under a tensile strain, while it increases by 6.8% under a compressive strain at 2 K. Also, it is revealed that the modulation on the interfacial transport property can be anisotropic, i.e., the resistance changes differently when an excitation current is parallel or perpendicular to the strain direction. This approach of strain engineering provides another degree of freedom for control of transport properties of oxide heterostructures and opens an additional way to investigate strain effects in materials science.
High-resolution TEM (HRTEM) is a powerful tool for structure characterization. However, methylammonium lead iodide (MAPbI3) perovskite is highly sensitive to electron beams and easily decompose into lead iodide (PbI2). Universal misidentifications th
at PbI2 is incorrectly labeled as perovskite are widely exist in HRTEM characterization, which would negatively affect the development of perovskite research field. Here misidentifications in MAPbI3 perovskite calibration are summarized, classified and corrected based on corresponding electron diffraction (ED) simulations. Corresponding crystallographic parameters of intrinsic tetragonal MAPbI3 and the confusable hexagonal PbI2 are also presented clearly. Finally, the method of proper phase identification and some ways to control the radiation damage in HRTEM are provided. This work paves the way to avoid misleadings in HRTEM characterization of perovskite and other electron beam-sensitive materials in the future.
The effect of substrate was studied using nanoindentation on thin films. Soft films on hard substrate showed more pile up than usual which was attributed to the dislocation pile up at the film substrate interface. The effect of tip blunting on the lo
ad depth and hardness plots of nanoindentation was shown. The experimental date of variation of Vickers hardness with film thickness and loads were fitted and new parameters were analyzed. The delaminated area was analyzed using geometrical shapes using optical view of the failure region along with the load displacement Indentation fracture using Nanoindentation using Berkovich indenter has been studied. Indentation fracture toughness (KR) was analyzed based on computational programs. The contact mechanics during nanoindentation was studied with parameters related to indenter shape and tip sharpness. Elastic, plastic and total energies were computationally determined. The energy difference was related to shear stress being generated with elastic to plastic transition. Change in the nature of residual stress was related to film thickness.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
