اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدAn Atom-Probe Tomographic Study of the Compositional Trajectories During gamma(f.c.c.)/gamma-prime(L12) Phase-Separation in a Ni-Al-Cr-Re Superalloy
63
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The compositional diffusional-trajectories for a phase separation of gamma(f.c.c.)/gamma-prime(L12) phases are studied in a quaternary Ni-10Al-8.5Cr-2Re alloy, aged at 700 deg.C for 0 to 1024 h, utilizing atom-probe tomography (APT). As the gamma-prime(L12)-precipitates grow, the enrichments of Ni, Cr, and Re and depletion of Al on the gamma(f.c.c.) matrix-side develop as a result of diffusional fluxes crossing the gamma(f.c.c.)/gamma-prime(L12) interface.The experimental (APT) compositional trajectories of the two-phases, gamma(f.c.c.)/gamma-prime(L12), are displayed in a quaternary phase-diagram, employing a tetrahedron, and compared with the Philippe-Voorhees (P-V) coarsening model which includes the off-diagonal terms in the diffusion tensor for the multi-component system.
قيم البحث
اقرأ أيضاً
The temporal evolution of ordered gamma-prime(L12)-precipitates and the compositional trajectories during phase-separation of the gamma(face-centered-cubic(f.c.c.)) and gamma-prime(L12)-phases are studied in a Ni-0.10Al-0.085Cr-0.02Re(mole-fraction)
superalloy, utilizing atom-probe tomography, transmission electron microscopy, and the Philippe-Voorhees (PV) coarsening model. As the gamma-prime(L12)-precipitates grow, the excesses of Ni, Cr and Re, and depletion of Al in the gamma(f.c.c.)-matrix develop as a result of diffusional fluxes crossing gamma(f.c.c.)/gamma-prime(L12) heterophase interfaces. The coupling effects on diffusional fluxes was introduced (PV coarsening model) in terms of the diffusion tensor, D, and the second-derivative tensor of the molar Gibbs free energies, G, obtained employing Thermo-Calc and DICTRA calculations. The Gibbs interfacial free energies are (16.9 +- 3.4) mJ/m2 with all terms in D and G, which changes to (46.3 +- 5.1) mJ/m2, (92.3 +- 7.9) mJ/m2, and (-18.5 +- 2.6) mJ/m2 without including the off-diagonal terms in D, G, and both D and G, respectively. The experimental APT compositional trajectories are displayed and compared with the PV model in a partial quaternary phase-diagram, employing a tetrahedron. The compositional trajectories measured by APT exhibit curvilinear behavior in the nucleation and growth regimes, which become vectors, moving simultaneously toward the gamma(f.c.c.) and gamma-prime(L12) conjugate solvus-surfaces, for the quasi-stationary coarsening regime. The compositional trajectories are compared to the PV model with and without the off-diagonal terms in D and G. The directions including the off-diagonal terms in D and G tensors are consistent with the APT experimental data.
Contemporary powder-based polycrystalline nickel-base superalloys inherit microstructures and properties that are heavily determined by the thermo-mechanical treatments during processing. Here, the influence of a thermal exposure alone to an alloy po
wder is studied to elucidate the controlling formation mechanisms of the strengthening precipitates using a combination of atom probe tomography and in-situ neutron diffraction. The initial powder comprised a single-phase supersaturated gamma only; from this, the evolution of gamma-prime volume fraction and lattice misfit was assessed. The initial powder notably possessed elemental segregation of Cr and Co and elemental repulsion between Ni, Al and Ti with Cr; here proposed to be a precursor for subsequent gamma to gamma-prime phase transformations. Subsolvus heat treatments yielded a unimodal gamma-prime distribution, formed during heating, with evidence supporting its formation to be via spinodal decomposition. A supersolvus heat treatment led to the formation of this same gamma-prime population during heating, but dissolves as the temperature increases further. The gamma-prime then reprecipitates as a multimodal population during cooling, here forming by classical nucleation and growth. Atom probe characterisation provided intriguing precipitate characteristics, including clear differences in chemistry and microstructure, depending on whether the gamma-prime formed during heating or cooling.
Co-base superalloys are considered as promising high temperature materials besides the well-established Ni-base superalloys. However, Ni appears to be an indispensable alloying element also in Co-base superalloys. To address the influence of the base
elements on the deformation behavior, high-temperature compressive creep experiments were performed on a single crystal alloy series that was designed to exhibit a varying Co/Ni ratio and a constant Al, W and Cr content. Creep tests were performed at 900 {deg}C and 250 MPa and the resulting microstructures and defect configurations were characterized via electron microscopy. The minimum creep rates differ by more than one order of magnitude with changing Co/Ni ratio. An intermediate CoNi-base alloy exhibits the overall highest creep strength. Several strengthening contributions like solid solution strengthening of the $gamma$ phase, effective diffusion coefficients or stacking fault energies were quantified. Precipitate shearing mechanisms differ significantly when the base element content is varied. While the Ni-rich superalloys exhibit SISF and SESF shearing, the Co-rich alloys develop extended APBs when the $gamma^prime$ phase is cut. This is mainly attributed to a difference in planar fault energies, caused by a changing segregation behavior. As result, it is assumed that the shearing resistivity and the occurring deformation mechanisms in the $gamma^prime$ phase are crucial for the creep properties of the investigated alloy series.
Based on a set of machine learning predictions of glass formation in the Ni-Ti-Al system, we have undertaken a high-throughput experimental study of that system. We utilized rapid synthesis followed by high-throughput structural and electrochemical c
haracterization. Using this dual-modality approach, we are able to better classify the amorphous portion of the library, which we found to be the portion with a full-width-half-maximum (FWHM) of 0.42 A$^{-1}$ for the first sharp x-ray diffraction peak. We demonstrate that the FWHM and corrosion resistance are correlated but that, while chemistry still plays a role, a large FWHM is necessary for the best corrosion resistance.
We study the magnetization and the spin dynamics of the Cr$_7$Ni ring-shaped magnetic cluster. Measurements of the magnetization at high pulsed fields and low temperature are compared to calculations and show that the spin Hamiltonian approach provid
es a good description of Cr$_7$Ni magnetic molecule. In addition, the phonon-induced relaxation dynamics of molecular observables has been investigated. By assuming the spin-phonon coupling to take place through the modulation of the local crystal fields, it is possible to evaluate the decay of fluctuations of two generic molecular observables. The nuclear spin-lattice relaxation rate $1/T_1$ directly probes such fluctuations, and allows to determine the magnetoelastic coupling strength.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
