اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMagnetically Tunable Organic Semiconductors with Superparamagnetic Nanoparticles
74
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Magnetic nanoparticles (MNPs) exhibiting superparamagnetic properties might generate large magnetic dipole-dipole interaction with electron spins in organic semiconductors (OSECs). This concept could be considered analogous to the effect of hyperfine interaction (HFI). In order to investigate this model, Fe3O4 MNPs are used as a dopant for generating random hyperfine-like magnetic fields in a HFI-dominant {pi}-conjugated polymer host, poly(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene) (MeH-PPV). The magnetoconductance (MC) response in organic light emitting diodes made by MeH-PPV/MNP blends is used to estimate the effective hyperfine field in the blends. Firstly, we find that the shape of the MC response essentially remains the same regardless of the MNP concentration, which is attributed to the similar functionality between the nuclear spins and the MNPs. Secondly, the width of MC increases with increasing MNP concentration. Magneto-optical Kerr effect experiments and micromagnetic simulation indicate that the additional increase of the MC width is associated with the strength of the magnetization of the blend. Finally, the MC broadening has the same temperature dependent trend as the magnetization of the MNPs where the unique effect of the MNPs in their superparamagnetic and ferromagnetic regimes on the MC response is observed. Magneto-photoinduced absorption (MPA) spectroscopy confirms that the MC broadening is not due to defects introduced by the MNPs, but is a result of unique superparamagnetic behavior. Our study yields a new pathway for tuning OSECs magnetic functionality, which is essential to organic optoelectronic devices and magnetic sensor applications.
قيم البحث
اقرأ أيضاً
A theoretical variation between the two distinct light-matter coupling regimes, namely weak and strong coupling, becomes uniquely feasible in open optical Fabry-Perot microcavities with low mode volume, as discussed here. In combination with monolaye
rs of transition-metal dichalcogenides (TMDCs) such as WS2, which exhibits a large exciton oscillator strength and binding energy, the room-temperature observation of hybrid bosonic quasiparticles, referred to as exciton-polaritons and characterized by a Rabi splitting, comes into reach. In this context, our simulations using the transfer-matrix method show how to tailor and alter the coupling strength actively by varying the relative field strength at the excitons position - exploiting a tunable cavity length, a transparent PMMA spacer layer and angle-dependencies of optical resonances. Continuously tunable coupling for future experiments is hereby proposed, capable of real-time adjustable Rabi splitting as well as switching between the two coupling regimes. Being nearly independent of the chosen material, the suggested structure could also be used in the context of light-matter-coupling experiments with quantum dots, molecules or quantum wells. While the adjustable polariton energy levels could be utilized for polariton-chemistry or optical sensing, cavities that allow working at the exceptional point promise the exploration of topological properties of that point.
Magnetic Particle Imaging (MPI) has been successfully used to visualize the distribution of superparamagnetic nanoparticles within 3D volumes with high sensitivity in real time. Since the magnetic field topology of MPI scanners is well suited for app
lying magnetic forces on particles and micron-sized ferromagnetic devices, MPI has been recently used to navigate micron-sized particles and micron-sized swimmers. In this work, we analyze the magnetophoretic mobility and the imaging performance of two different particle types for Magnetic Particle Imaging/Navigation (MPIN). MPIN constantly switches between imaging and magnetic modes, enabling quasi-simultaneous navigation and imaging of particles. We determine the limiting flow velocity to be 8.18 mL/s using a flow bifurcation experiment, that allows all particles to flow only through one branch of the bifurcation. Furthermore, we have succeeded in navigating the particles through the branch of a bifurcation phantom narrowed by either 60% or 100% stenosis, while imaging their accumulation on the stenosis. The particles in combination with therapeutic substances have a high potential for targeted drug delivery and could help to reduce the dose and improve the efficacy of the drug, e.g. for specific tumor therapy and ischemic stroke therapy.
Engineering a low singlet-triplet energy gap ({Delta}EST) is necessary for efficient reverse intersystem crossing (rISC) in delayed fluorescence (DF) organic semiconductors, but results in a small radiative rate that limits performance in LEDs. Here,
we study a model DF material, BF2, that exhibits a strong optical absorption (absorption coefficient =3.8x10^5 cm^-1) and a relatively large {Delta}EST of 0.2 eV. In isolated BF2 molecules, intramolecular rISC is slow (260 {mu}s), but in aggregated films, BF2 generates intermolecular CT (inter-CT) states on picosecond timescales. In contrast to the microsecond intramolecular rISC that is promoted by spin-orbit interactions in most isolated DF molecules, photoluminescence-detected magnetic resonance shows that these inter-CT states undergo rISC mediated by hyperfine interactions on a ~24 ns timescale and have an average electron-hole separation of >1.5 nm. Transfer back to the emissive singlet exciton then enables efficient DF and LED operation. Thus, access to these inter-CT states resolves the conflicting requirements of fast radiative emission and low {Delta}EST.
Selective hysteretic heating of multiple collocated sets of single domain magnetic nanoparticles (SDMNPs) by alternating magnetic fields (AMFs) may offer a useful tool for biomedical applications. The possibility of magnetothermal multiplexing has no
t yet been realized, in part due to prevalent use of linear response theory to model SDMNP heating in AMFs. Predictive successes of dynamic hysteresis (DH), a more generalized model for heat dissipation by SDMNPs, are observed experimentally with detailed calorimetry measurements performed at varied AMF amplitudes and frequencies. The DH model suggests that specific driving conditions play an underappreciated role in determining optimal material selection strategies for high heat dissipation. Motivated by this observation, magnetothermal multiplexing is theoretically predicted and empirically demonstrated for the first time by selecting SDMNPs with properties that suggest optimal hysteretic heat dissipation at dissimilar AMF driving conditions. This form of multiplexing could effectively create multiple channels for minimally invasive biological signaling applications.
We present X-ray diffraction (XRD), Mossbauer spectroscopy (MS) and d.c. magnetization measurements performed on ball-milled CuFe2O4 samples. The average particle size <d> was found to decrease to the nanometer range after t=15 min of milling. Room t
emperature Mossbauer data showed that the fraction of particles above the blocking temperature TB increases with milling time, and almost complete superparamagnetic samples are obtained for <d> = 7(2) nm. Magnetization measurements below TB suggest spin canting in milled samples. The values of saturation moment mu_S reveal that site populations are slightly affected by milling. Mossbauer resonant intensities are accounted for on the basis of local disorder of Fe3+ environments, and the development of sample inhomogeneities of CuxFe3-xO4 composition.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
