اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMaximizing Specific Loss Power for Magnetic Hyperthermia by Hard-Soft Mixed Ferrites
62
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We report maximized specific loss power and intrinsic loss power approaching theoretical limits for AC magnetic field heating of nanoparticles. This is achieved by engineering the effective magnetic anisotropy barrier of nanoparticles via alloying of hard and soft ferrites. 22 nm Co0.03Mn0.28Fe2.7O4/SiO2 NPs reached a specific loss power value of 3417 W/gmetal at a field of 33 kA/m and 380 kHz. Biocompatible Zn0.3Fe2.7O4/SiO2 nanoparticles achieved specific loss power of 500 W/gmetal and intrinsic loss power of 26.8 nHm2/kg at field parameters of 7 kA/m and 380 kHz, below the clinical safety limit. Magnetic bone cement achieved heating adequate for bone tumor hyperthermia, incorporating ultralow dosage of just 1 wt% of nanoparticles. In cellular hyperthermia experiments, these nanoparticles demonstrated high cell death rate at low field parameters. Zn0.3Fe2.7O4/SiO2 nanoparticles show cell viabilities above 97% at concentrations up to 0.5 mg/ml within 48 hrs, suggesting toxicity lower than that of magnetite.
قيم البحث
اقرأ أيضاً
We investigate the magnetic nanoparticles (fluid) hyperthermia in non-adiabatic conditions through the calorimetric method. Specifically, we propose a theoretical approach to magnetic hyperthermia from a thermodynamic point of view. To test the robus
tness of the approach, we perform hyperthermia experiments and analyze the thermal behavior of magnetite and magnesium ferrite magnetic nanoparticles dispersed in water submitted to an alternating magnetic field. From our findings, besides estimating the specific loss power value from a non-adiabatic process, thus enhancing the accuracy in the determination of this quantity, we provide physical meaning to parameters found in literature that still remained not fully understood, and bring to light how they can be obtained experimentally.
Magnetic nanoparticles are promising systems for biomedical applications and in particular for Magnetic Fluid Hyperthermia, a promising therapy that utilizes the heat released by such systems to damage tumor cells. We present an experimental study of
the physical properties that influences the capability of heat release, i.e. the Specific Loss Power, SLP, of three biocompatible ferrofluid samples having a magnetic core of maghemite with different core diameter d= 10.2, 14.6 and 19.7 nm. The SLP was measured as a function of frequency f and intensity of the applied alternating magnetic field H, and it turned out to depend on the core diameter, as expected. The results allowed us to highlight experimentally that the physical mechanism responsible for the heating is size-dependent and to establish, at applied constant frequency, the phenomenological functional relationship SLP=cH^x, with 2<x<3 for all samples. The x-value depends on sample size and field frequency/ intensity, here chosen in the typical range of operating magnetic hyperthermia devices. For the smallest sample, the effective relaxation time Teff=19.5 ns obtained from SLP data is in agreement with the value estimated from magnetization data, thus confirming the validity of the Linear Response Theory model for this system at properly chosen field intensity and frequency.
Magnetic nanoparticle hyperthermia is an attractive emerging cancer treatment, but the acting microscopic energy deposition mechanisms are not well understood and optimization suffers. We describe several approximate forms for the characteristic time
of N{e}el rotations with varying properties and external influences. We then present stochastic simulations that show agreement between the approximate expressions and the micromagnetic model. The simulations show nonlinear imaginary responses and associated relaxational hysteresis due to the field and frequency dependencies of the magnetization. This suggests efficient heating is possible by matching fields to particles instead of resorting to maximizing the power of the applied magnetic fields.
We report on the magnetic hyperthermia properties of chemically synthesized ferromagnetic 11 and 16 nm Fe(0) nanoparticles of cubic shape displaying the saturation magnetization of bulk iron. The specific absorption rate measured on 16 nm nanocubes i
s 1690+-160 W/g at 300 kHz and 66 mT. This corresponds to specific losses-per-cycle of 5.6 mJ/g, largely exceeding the ones reported in other systems. A way to quantify the degree of optimization of any system with respect to hyperthermia applications is proposed. Applied here, this method shows that our nanoparticles are not fully optimized, probably due to the strong influence of magnetic interactions on their magnetic response. Once protected from oxidation and further optimized, such nano-objects could constitute efficient magnetic cores for biomedical applications requiring very large heating power.
We investigate the spatial distribution of spin orientation in magnetic nanoparticles consisting of hard and soft magnetic layers. The nanoparticles are synthesized in a core / shell spherical morphology where the magnetically hard, high anisotropy l
ayer is CoFe$_2$O$_4$ (CFO) while the lower anisotropy material is Fe$_3$O$_4$ (FO). The nanoparticles have a mean diameter of $sim$9.2 - 9.6 nm and are synthesized as two variants: a conventional hard / soft core / shell structure with a CFO core / FO shell (CFO@FO) and the inverted structure FO core / CFO shell (FO@CFO). High resolution electron microscopy confirms the coherent spinel structure across the core / shell boundary in both variants while magnetometry indicates the nanoparticles are superparamagnetic at 300 K and develop a considerable anisotropy at reduced temperatures. Low temperature textit{M vs. H} loops suggest a multi-step reversal process. Temperature dependent small angle neutron scattering (SANS) with full polarization analysis reveals a strong perpendicular plane alignment of the spins near zero field, indicative of spin canting, but the perpendicular alignment quickly disappears upon application of a weak field and little spin ordering parallel to the field until the coercive field is reached. Above the coercive field of the sample, spins orient predominantly along the field direction. At both zero field and near saturation, the parallel magnetic SANS peak coincides with the structural peak, indicating the magnetization is uniform throughout the nanoparticle volume, while near the coercive field the parallel scattering peak shifts to higher momentum transfer (Q), suggesting that the coherent scattering volume is smaller and likely originates in the softer Fe$_3$O$_4$ portion of the nanoparticle.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
