اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدThe Need for Speed: Escape velocity and dynamical mass measurements of the Andromeda galaxy
299
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Our nearest large cosmological neighbour, the Andromeda galaxy (M31), is a dynamical system, and an accurate measurement of its total mass is central to our understanding of its assembly history, the life-cycles of its satellite galaxies, and its role in shaping the Local Group environment. Here, we apply a novel approach to determine the dynamical mass of M31 using high velocity Planetary Nebulae (PNe), establishing a hierarchical Bayesian model united with a scheme to capture potential outliers and marginalize over tracers unknown distances. With this, we derive the escape velocity run of M31 as a function of galacto-centric distance, with both parametric and non-parametric approaches. We determine the escape velocity of M31 to be $470pm{40}$ km s$^{-1}$ at a galacto-centric distance of 15 kpc, and also, derive the total potential of M31, estimating the virial mass and radius of the galaxy to be $0.8pm{0.1}times10^{12},M_odot$ and $240pm{10}$ kpc, respectively. Our M31 mass is on the low-side of the measured range, this supports the lower expected mass of the M31-Milky Way system from the timing and momentum arguments, satisfying the HI constraint on circular velocity between $10lesssim R/textrm{kpc}<35$, and agreeing with the stellar mass Tully-Fisher relation. To place these results in a broader context, we compare them to the key predictions of the $Lambda{rm CDM}$ cosmological paradigm, including the stellar-mass-halo-mass and the dark matter halo concentration-virial mass correlation, and finding it to be an outlier to this relation.
قيم البحث
اقرأ أيضاً
We construct new estimates on the Galactic escape speed at various Galactocentric radii using the latest data release of the Radial Velocity Experiment (RAVE DR4). Compared to previous studies we have a database larger by a factor of 10 as well as re
liable distance estimates for almost all stars. Our analysis is based on the statistical analysis of a rigorously selected sample of 90 high-velocity halo stars from RAVE and a previously published data set. We calibrate and extensively test our method using a suite of cosmological simulations of the formation of Milky Way-sized galaxies. Our best estimate of the local Galactic escape speed, which we define as the minimum speed required to reach three virial radii $R_{340}$, is $533^{+54}_{-41}$ km/s (90% confidence) with an additional 5% systematic uncertainty, where $R_{340}$ is the Galactocentric radius encompassing a mean over-density of 340 times the critical density for closure in the Universe. From the escape speed we further derive estimates of the mass of the Galaxy using a simple mass model with two options for the mass profile of the dark matter halo: an unaltered and an adiabatically contracted Navarro, Frenk & White (NFW) sphere. If we fix the local circular velocity the latter profile yields a significantly higher mass than the un-contracted halo, but if we instead use the statistics on halo concentration parameters in large cosmological simulations as a constraint we find very similar masses for both models. Our best estimate for $M_{340}$, the mass interior to $R_{340}$ (dark matter and baryons), is $1.3^{+0.4}_{-0.3} times 10^{12}$ M$_odot$ (corresponding to $M_{200} = 1.6^{+0.5}_{-0.4} times 10^{12}$ M$_odot$). This estimate is in good agreement with recently published independent mass estimates based on the kinematics of more distant halo stars and the satellite galaxy Leo I.
We model the fastest moving (v_tot > 300 km/s) local (D < 3 kpc) halo stars using cosmological simulations and 6-dimensional Gaia data. Our approach is to use our knowledge of the assembly history and phase-space distribution of halo stars to constra
in the form of the high velocity tail of the stellar halo. Using simple analytical models and cosmological simulations, we find that the shape of the high velocity tail is strongly dependent on the velocity anisotropy and number density profile of the halo stars --- highly eccentric orbits and/or shallow density profiles have more extended high velocity tails. The halo stars in the solar vicinity are known to have a strongly radial velocity anisotropy, and it has recently been shown the origin of these highly eccentric orbits is the early accretion of a massive (M_star ~ 10^9 M_Sun) dwarf satellite. We use this knowledge to construct a prior on the shape of the high velocity tail. Moreover, we use the simulations to define an appropriate outer boundary of 2r_200, beyond which stars can escape. After applying our methodology to the Gaia data, we find a local (r_0=8.3 kpc) escape speed of v_esc(r_0) = 528(+24,-25) km/s. We use our measurement of the escape velocity to estimate the total Milky Way mass, and dark halo concentration: M_200,tot = 1.00(+0.31,-0.24) x 10^12 M_Sun, c_200 = 10.9(+4.4,-3.3). Our estimated mass agrees with recent results in the literature that seem to be converging on a Milky Way mass of M_200,tot ~ 10^12 M_Sun.
We use velocity dispersion measurements of 21 individual cluster members in the core of Abell 383, obtained with MMT Hectospec, to separate the galaxy and the smooth dark halo (DH) lensing contributions. While lensing usually constrains the overall,
projected mass density, the innovative use of velocity dispersion measurements as a proxy for masses of individual cluster members breaks inherent degeneracies and allows us to (a) refine the constraints on single galaxy masses and on the galaxy mass-to-light scaling relation and, as a result, (b) refine the constraints on the DM-only map, a high-end goal of lens modelling. The knowledge of cluster member velocity dispersions improves the fit by 17% in terms of the image reproduction $chi^2$, or 20% in terms of the rms. The constraints on the mass parameters improve by ~10% for the DH, while for the galaxy component, they are refined correspondingly by ~50%, including the galaxy halo truncation radius. For an L$^*$ galaxy with M$^*_B$=-20.96, for example, we obtain best fitting truncation radius r$^*_{tr}=20.5^{+9.6}_{-6.7}$ kpc and velocity dispersion $sigma^*=324pm17 km/s$. Moreover, by performing the surface brightness reconstruction of the southern giant arc, we improve the constraints on r$_{tr}$ of two nearby cluster members, which have measured velocity dispersions, by more than ~30%. We estimate the stripped mass for these two galaxies, getting results that are consistent with numerical simulations. In the future, we plan to apply this analysis to other galaxy clusters for which velocity dispersions of member galaxies are available.
The ultra-diffuse galaxy in the NGC 5846 group (NGC 5846_UDG1) was shown to have a large number of globular cluster (GC) candidates from deep imaging as part of the VEGAS survey. Recently, Muller et al. published a velocity dispersion, based on a doz
en of its GCs. Within their quoted uncertainties, the resulting dynamical mass allowed for either a dark matter free or a dark matter dominated galaxy. Here we present spectra from KCWI which reconfirms membership of the NGC 5846 group and reveals a stellar velocity dispersion for UDG1 of $sigma_{GC}$ = 17 $pm$ 2 km/s. Our dynamical mass, with a reduced uncertainty, indicates a very high contribution of dark matter within the effective radius. We also derive an enclosed mass from the locations and motions of the GCs using the Tracer Mass Estimator, finding a similar mass inferred from our stellar velocity dispersion. We find no evidence that the galaxy is rotating and is thus likely pressure-supported. The number of confirmed GCs, and the total number inferred for the system ($sim$45), suggest a total halo mass of $sim2 times 10^{11}$ M$_{odot}$. A cored mass profile is favoured when compared to our dynamical mass. Given its stellar mass of 1.1$times$10$^{8}$ M$_{odot}$, NGC 5846_UDG1 appears to be an ultra-diffuse galaxy with a dwarf-like stellar mass and an overly massive halo.
Measuring the escape velocity of the Milky Way is critical in obtaining the mass of the Milky Way, understanding the dark matter velocity distribution, and building the dark matter density profile. In Necib $&$ Lin (2021), we introduced a strategy to
robustly measure the escape velocity. Our approach takes into account the presence of kinematic substructures by modeling the tail of the stellar distribution with multiple components, including the stellar halo and the debris flow called the Gaia Sausage (Enceladus). In doing so, we can test the robustness of the escape velocity measurement for different definitions of the tail of the velocity distribution, and the consistency of the data with different underlying models. In this paper, we apply this method to the second data release of Gaia and find that a model with at least two components is preferred. Based on a fit with three bound components to account for the disk, relaxed halo, and the Gaia Sausage, we find the escape velocity of the Milky Way at the solar position to be $v_{rm{esc}}= 484.6^{+17.8}_{-7.4}$ km/s. Assuming a Navarro-Frenck-White dark matter profile, and taken in conjunction with a recent measurement of the circular velocity at the solar position of $v_c = 230 pm 10$ km/s, we find a Milky Way concentration of $c_{200} = 13.8^{+6.0}_{-4.3}$ and a mass of $M_{200} = 7.0^{+1.9}_{-1.2} times 10^{11} M_{odot}$, which is considerably lighter than previous measurements.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
