اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدCapture the growth kinetics of CVD growth of two-dimensional MoS2
108
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Understanding the microscopic mechanism of chemical vapor deposition (CVD) growth of two-dimensional molybdenum disulfide (2D MoS2) is a fundamental issue towards the function-oriented controlled growth. In this work, we report results on revealing the growth kinetics of 2D MoS2 via capturing the nucleation seed, evolution morphology, edge structure and terminations at the atomic scale during CVD growth using the transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) studies. The direct growth of few- and mono-layer MoS2 onto graphene based TEM grids allow us to perform the subsequent TEM characterization without any solution-based transfer. Two forms of seeding centers are observed during characterizations: (i) Mo-oxysulfide (MoOxS2-y) nanoparticles either in multi-shelled fullerene-like structures or in compact nanocrystals for the growth of fewer-layer MoS2; (ii) Mo-S atomic clusters in case of monolayer MoS2. In particular, for the monolayer case, at the early stage growth, the morphology appears in irregular polygon shape comprised with two primary edge terminations: S-Mo Klein edge and Mo zigzag edge, approximately in equal numbers, while as the growth proceeds, the morphology further evolves into near-triangle shape in which Mo zigzag edge predominates. Results from density-functional theory calculations are also consistent with the inferred growth kinetics, and thus supportive to the growth mechanism we proposed. In general, the growth mechanisms found here should also be applicable in other 2D materials, such as MoSe2, WS2 and WSe2 etc.
قيم البحث
اقرأ أيضاً
Ultrathin semiconductors present various novel electronic properties. The first experimental realized two-dimensional (2D) material is graphene. Searching 2D materials with heavy elements bring the attention to Si, Ge and Sn. 2D buckled Si-based sili
cene was realized by molecular beam epitaxy (MBE) growth1,2. Ge-based germanene was realized by mechanical exfoliation3. Sn-based stanene has its unique properties. Stanene and its derivatives can be 2D topological insulators (TI) with a very large band gap as proposed by first-principles calculations4, or can support enhanced thermoelectric performance5, topological superconductivity6 and the near-room-temperature quantum anomalous Hall (QAH) effect7. For the first time, in this work, we report a successful fabrication of 2D stanene by MBE. The atomic and electronic structures were determined by scanning tunneling microscopy (STM) and angle-resolved photoemission spectroscopy (ARPES) in combination with first-principles calculations. This work will stimulate the experimental study and exploring the future application of stanene.
CONSPECTUS: Two-dimensional (2D) compound materials are promising materials for use in electronics, optoelectronics, flexible devices, etc. because they are ultrathin and cover a wide range of properties. Among all methods to prepare 2D materials, ch
emical vapor deposition (CVD) is promising because it produces materials with a high quality and reasonable cost. So far, much efforts have been made to produce 2D compound materials with large domain size, controllable number of layers, fast-growth rate, and high quality features, etc. However, due to the complicated growth mechanism like sublimation and diffusion processes of multiple precursors, maintaining the controllability, repeatability, and high quality of CVD grown 2D binary and ternary materials is still a big challenge, which prevents their widespread use. Here, taking 2D transition metal dichalcogenides (TMDCs) as examples, we review current progress and highlight some promising growth strategies for the growth of 2D compound materials. The key technology issues which affect the CVD process, including non-metal precursor, metal precursor, substrate engineering, temperature, and gas flow, are discussed. Also, methods in improving the quality of CVD-grown 2D materials and current understanding on their growth mechanism are highlighted. Finally, challenges and opportunities in this field are proposed. We believe this review will guide the future design of controllable CVD systems for the growth of 2D compound materials with good controllability and high quality, laying the foundations for their potential applications.
Growing large-area single-crystal monolayers is the holy grail of graphene synthesis. In this work, the efficiency of graphene growth and the quality of their continuous films are explored through the time evolution of individual domains and their su
rface coverage on the substrate. Our phase-field modeling results and experimental characterization clearly demonstrate the critical roles of the deposition flux, edge-reaction kinetics and the surface diffusion of active carbon sources in modulating the pattern evolution and rate of growth. The contrast in edge-kinetics-limited and surface-diffusion-limited regimes is remarkable, which can be characterized by the evolution of domain patterns and considered as an indicator of the growth regime. Common features exist in these two regimes, showing that the growth rate scales with time as t2 in the early stage of growth and is regime-independent, which is explained by the coarsen profiles of carbon concentration for both the compact and dendritic domains. The rate decays rapidly in the final stage of growth due to the competition between neighboring domains on the limited carbon sources diffusing on the substrate, which is highly regime-sensitive and extremely low in the surface-diffusion-limited regime with narrow gaps between the domains to be filled. Based on these findings, synthesis strategies to improve the growth efficiency and film quality are discussed.
Chemical vapor deposition (CVD) of two-dimensional (2D) materials such as monolayer MoS2 typically involves the conversion of vapor-phase precursors to a solid product in a process that may be described as a vapor-solid-solid (VSS) mode. Here, we rep
ort the first demonstration of vapor-liquid-solid (VLS) growth of monolayer MoS2 yielding highly crystalline ribbon-shaped structures with a width of a few tens of nanometers to a few micrometers. The VLS growth mode is triggered by the reaction between molybdenum oxide and sodium chloride, which results in the formation of molten Na-Mo-O droplets. These droplets mediate the growth of MoS2 ribbons in the crawling mode when saturated with sulfur on a crystalline substrate. Our growth yields straight and kinked ribbons with a locally well-defined orientation, reflecting the regular horizontal motion of the liquid droplets during growth. Using atomic-resolution scanning transmission electron microscopy (STEM) and second harmonic generation (SHG) microscopy, we show that the ribbons are homoepitaxially on monolayer MoS2 surface with predominantly 2H- or 3R-type stacking. These findings pave the way to novel devices with structures of mixed dimensionalities.
Recently, hexagonal boron nitride (h-BN) has been shown to act as an ideal substrate to graphene by greatly improving the material transport properties thanks to its atomically flat surface, low interlayer electronic coupling and almost perfect retic
ular matching. Chemical vapour deposition (CVD) is presently considered the most scalable approach to grow graphene directly on h-BN. However, for the catalyst-free approach, poor control over the shape and crystallinity of the graphene grains and low growth rates are typically reported. In this work we investigate the crystallinity of differently shaped grains and identify a path towards a real van der Waals epitaxy of graphene on h-BN by adopting a catalyst-free CVD process. We demonstrate the polycrystalline nature of circular-shaped pads and attribute the stemming of different oriented grains to airborne contamination of the h-BN flakes. We show that single-crystal grains with six-fold symmetry can be obtained by adopting high hydrogen partial pressures during growth. Notably, growth rates as high as 100 nm/min are obtained by optimizing growth temperature and pressure. The possibility of synthesizing single-crystal graphene on h-BN with appreciable growth rates by adopting a simple CVD approach is a step towards an increased accessibility of this promising van der Waals heterostructure.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
