اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدGrowth control of the oxidation state in vanadium oxide thin films
526
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Precise control of the chemical valence or oxidation state of vanadium in vanadium oxide thin films is highly desirable for not only fundamental research, but also technological applications that utilize the subtle change in the physical properties originating from the metal- insulator transition (MIT) near room temperature. However, due to the multivalent nature of vanadium and the lack of a good understanding on growth control of the oxidation state, stabilization of phase pure vanadium oxides with a single oxidation state is extremely challenging. Here, we systematically varied the growth conditions to clearly map out the growth window for preparing phase pure epitaxial vanadium oxides by pulsed laser deposition for providing a guideline to grow high quality thin films with well-defined oxidation states of V2(+3)O3, V(+4)O2, and V2(+5)O5. A well pronounced MIT was only observed in VO2 films grown in a very narrow range of oxygen partial pressure P(O2). The films grown either in lower (< 10 mTorr) or higher P(O2) (> 25 mTorr) result in V2O3 and V2O5 phases, respectively, thereby suppressing the MIT for both cases. We have also found that the resistivity ratio before and after the MIT of VO2 thin films can be further enhanced by one order of magnitude when the films are further oxidized by post-annealing at a well-controlled oxidizing ambient. This result indicates that stabilizing vanadium into a single valence state has to compromise with insufficient oxidation of an as grown thin film and, thereby, a subsequent oxidation is required for an improved MIT behavior.
قيم البحث
اقرأ أيضاً
Antiferromagnetic thin films typically exhibit a multi-domain state, and control of the antiferromagnetic Neel vector is challenging as antiferromagnetic materials are robust to magnetic perturbations. By relying on anisotropic in-plane strain engine
ering of epitaxial thin films of the prototypical antiferromagnetic material LaFeO3, uniaxial Neel vector control is demonstrated. Orthorhombic (011)- and (101)-oriented DyScO3, GdScO3 and NdGaO3 substrates are used to engineer different anisotropic in-plane strain states. The anisotropic in-plane strain stabilises structurally monodomain monoclinic LaFeO3 thin films. The uniaxial Neel vector is found along the tensile strained b axis, contrary to bulk LaFeO3 having the Neel vector along the shorter a axis, and no magnetic domains are found. Hence, anisotropic strain engineering is a viable tool for designing unique functional responses, further enabling antiferromagnetic materials for mesoscopic device technology.
Vanadium dioxide is a complex oxide material, which shows large resistivity and optical reflectance change while transitioning from the insulator to metal phase at ~68 {deg}C. In this work, we use a modified atmospheric thermal oxidation method to ox
idize RF-sputtered Vanadium films. Structural, surface-morphology and phase-transition properties of the oxidized films as a function of oxidation duration are presented. Phase-pure VO2 films are obtained by oxidizing ~130 nm Vanadium films in short oxidation duration of ~30 seconds. Compared to previous reports on VO2 synthesis using atmospheric oxidation of Vanadium films of similar thickness, we obtain a reduction in oxidation duration by more than one order. Synthesized VO2 thin film shows resistance switching of ~3 orders of magnitude. We demonstrate optical reflectance switching in long-wave infrared wavelengths in VO2 films synthesized using atmospheric oxidation of Vanadium. The extracted refractive index of VO2 in the insulating and in the metallic phase is in good agreement with VO2 synthesized using other methods. The considerable reduction in oxidation time of VO2 synthesis while retaining good resistance and optical switching properties will help in integration of VO2 in limited thermal budget processes, enabling further applications of this phase-transition material.
Recent advances in high-throughput experimentation for combinatorial studies have accelerated the discovery and analysis of materials across a wide range of compositions and synthesis conditions. However, many of the more powerful characterization me
thods are limited by speed, cost, availability, and/or resolution. To make efficient use of these methods, there is value in developing approaches for identifying critical compositions and conditions to be used as a-priori knowledge for follow-up characterization with high-precision techniques, such as micron-scale synchrotron based X-ray diffraction (XRD). Here we demonstrate the use of optical microscopy and reflectance spectroscopy to identify likely phase-change boundaries in thin film libraries. These methods are used to delineate possible metastable phase boundaries following lateral-gradient Laser Spike Annealing (lg-LSA) of oxide materials. The set of boundaries are then compared with definitive determinations of structural transformations obtained using high-resolution XRD. We demonstrate that the optical methods detect more than 95% of the structural transformations in a composition-gradient La-Mn-O library and a Ga$_2$O$_3$ sample, both subject to an extensive set of lg-LSA anneals. Our results provide quantitative support for the value of optically-detected transformations as a priori data to guide subsequent structural characterization, ultimately accelerating and enhancing the efficient implementation of $mu$m-resolution XRD experiments.
Strong electronic correlations can produce remarkable phenomena such as metal-insulator transitions and greatly enhance superconductivity, thermoelectricity, or optical non-linearity. In correlated systems, spatially varying charge textures also ampl
ify magnetoelectric effects or electroresistance in mesostructures. However, how spatially varying spin textures may influence electron transport in the presence of correlations remains unclear. Here we demonstrate a very large topological Hall effect (THE) in thin films of a lightly electron-doped charge-transfer insulator, (Ca, Ce)MnO3. Magnetic force microscopy reveals the presence of magnetic bubbles, whose density vs. magnetic field peaks near the THE maximum, as is expected to occur in skyrmion systems. The THE critically depends on carrier concentration and diverges at low doping, near the metal-insulator transition. We discuss the strong amplification of the THE by correlation effects and give perspectives for its non-volatile control by electric fields.
Topological insulators are a class of materials with insulating bulk but protected conducting surfaces due to the combination of spin-orbit interactions and time-reversal symmetry. The surface states are topologically non-trivial and robust against n
on-magnetic backscattering, leading to interesting physics and potential quantum computing applications1, 2. Recently there has been a fast growing interest in samarium hexboride (SmB6), a Kondo insulator predicted to be the first example of a correlated topological insulator3, 4. Here we fabricated smooth thin films of nanocrystalline SmB6 films. Their transport behavior indeed shows that SmB6 is a bulk insulator with topological surface states. Upon decreasing the temperature, the resistivity r{ho} of Sm0.14B0.86 (SmB6) films display significant increase below 50 K due to hybridization gap formation, and it shows a saturation behavior below 10 K. The saturated resistance of our textured films is similar to that of the single crystals, suggesting that this conduction is from the surface and robust against grain boundary scatterings. Point contact spectroscopy (PCS) of the film using a superconducting tip displays both a Kondo Fano resonance and Andreev reflection, suggesting the existence of both an insulating Kondo lattice and metallic surface states.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
