ترغب بنشر مسار تعليمي؟ اضغط هنا

Evidence for a receding dust sublimation region around a supermassive black hole

121   0   0.0 ( 0 )
 نشر من قبل Makoto Kishimoto
 تاريخ النشر 2013
  مجال البحث فيزياء
والبحث باللغة English
 تأليف Makoto Kishimoto




اسأل ChatGPT حول البحث

The near-IR emission in Type 1 AGNs is thought to be dominated by the thermal radiation from dust grains that are heated by the central engine in the UV/optical and are almost at the sublimation temperature. A brightening of the central source can thus further sublimate the innermost dust, leading to an increase in the radius of the near-IR emitting region. Such changes in radius have been indirectly probed by the measurements of the changes in the time lag between the near-IR and UV/optical light variation. Here we report direct evidence for such a receding sublimation region through the near-IR interferometry of the brightest Type 1 AGN in NGC4151. The increase in radius follows a significant brightening of the central engine with a delay of at least a few years, which is thus the implied destruction timescale of the innermost dust distribution. Compiling historic flux variations and radius measurements, we also infer the reformation timescale for the inner dust distribution to be several years in this galactic nucleus. More specifically and quantitatively, we find that the radius at a given time seems to be correlated with a long-term average of the flux over the previous several (~6) years, instead of the instantaneous flux. Finally, we also report measurements of three more Type 1 AGNs newly observed with the Keck interferometer, as well as the second epoch measurements for three other AGNs.



قيم البحث

اقرأ أيضاً

We study a model in which supermassive black holes (SMBHs) can grow by the combined action of gas accretion on heavy seeds and mergers of both heavy (m_s^h=10^5 Msol) and light (m_s^l = 10^2 Msol) seeds. The former result from the direct collapse of gas in T_s^h >1.5x10^4K, H_2-free halos; the latter are the endproduct of a standard H_2-based star formation process. The H_2-free condition is attained by exposing halos to a strong (J_21 > 10^3) Lyman-Werner UV background produced by both accreting BHs and stars, thus establishing a self-regulated growth regime. We find that this condition is met already at z close to 18 in the highly biased regions in which quasars are born. The key parameter allowing the formation of SMBHs by z=6-7 is the fraction of halos that can form heavy seeds: the minimum requirement is that f_heavy>0.001; SMBH as large as 2x10^10 Msol can be obtained when f_heavy approaches unity. Independently of f_heavy, the model produces a high-z stellar bulge-black hole mass relation which is steeper than the local one, implying that SMBHs formed before their bulge was in place. The formation of heavy seeds, allowed by the Lyman-Werner radiative feedback in the quasar-forming environment, is crucial to achieve a fast growth of the SMBH by merger events in the early phases of its evolution, i.e. z>7. The UV photon production is largely dominated by stars in galaxies, i.e. black hole accretion radiation is sub-dominant. Interestingly, we find that the final mass of light BHs and of the SMBH in the quasar is roughly equal by z=6; by the same time only 19% of the initial baryon content has been converted into stars. The SMBH growth is dominated at all epochs z > 7.2 by mergers (exceeding accretion by a factor 2-50); at later times accretion becomes by far the most important growth channel. We finally discuss possible shortcomings of the model.
111 - Kentaro Nagamine 2011
We study the gas accretion onto a supermassive black hole (SMBH) using the 3D SPH code GADGET-3 on scales of 0.1-200 pc. First we test our code with spherically symmetric, adiabatic Bondi accretion problem. We find that our simulation can reproduce t he expected Bondi accretion flow very well for a limited amount of time until the effect of outer boundary starts to be visible. We also find artificial heating of gas near the inner accretion boundary due to the artificial viscosity of SPH. Second, we implement radiative cooling and heating due to X-rays, and examine the impact of thermal feedback by the central X-ray source. The accretion flow roughly follows the Bondi solution for low central X-ray luminosities, however, the flow starts to exhibit non-spherical fragmentation due to thermal instability for a certain range of central L_X, and a strong overall outflow develops for greater L_X. The cold gas develops filamentary structures that fall into the central SMBH, whereas the hot gas tries to escape through the channels in-between the cold filaments. Such fragmentation of accreting gas can assist in the formation of clouds around AGN, induce star-formation, and contribute to the observed variability of narrow-line regions.
The search for extraterrestrial intelligence (SETI) has been conducted for nearly 60 years. A Dyson Sphere, a spherical structure that surrounds a star and transports its radiative energy outward as an energy source for an advanced civilisation, is o ne of the main targets of SETI. In this study, we discuss whether building a Dyson Sphere around a black hole is effective. We consider six energy sources: (i) the cosmic microwave background, (ii) the Hawking radiation, (iii) an accretion disk, (iv) Bondi accretion, (v) a corona, and (vi) relativistic jets. To develop future civilisations (for example, a Type II civilisation), $4times10^{26},{rm W}$($1,{rm L_{odot}}$) is expected to be needed. Among (iii) to (vi), the largest luminosity can be collected from an accretion disk, reaching $10^{5},{rm L_{odot}}$, enough to maintain a Type II civilisation. Moreover, if a Dyson Sphere collects not only the electromagnetic radiation but also other types of energy (e.g., kinetic energy) from the jets, the total collected energy would be approximately 5 times larger. Considering the emission from a Dyson Sphere, our results show that the Dyson Sphere around a stellar-mass black hole in the Milky Way ($10,rm kpc$ away from us) is detectable in the ultraviolet$(rm 10-400,{rm nm)}$, optical$(rm 400-760,{rm nm)}$, near-infrared($rm 760,{rm nm}-5,{rm mu m}$), and mid-infrared($rm 5-40,{rm mu m}$) wavelengths via the waste heat radiation using current telescopes such as Galaxy Evolution Explorer Ultraviolet Sky Surveys. Performing model fitting to observed spectral energy distributions and measuring the variability of radial velocity may help us to identify these possible artificial structures.
We show results from the radiation hydrodynamics (RHD) simulations of tidal disruption of a star on a parabolic orbit by a supermassive black hole (SMBH) based on a three-dimensional smoothed particle hydrodynamics code with radiative transfer. We fi nd that such a tidally disrupted star fragment and form clumps soon after its tidal disruption. The fragmentation results from the endothermic processes of ionization and dissociation that reduce the gas pressure, leading to local gravitational collapse. Radiative cooling is less effective because the stellar debris is still highly optically thick in such an early time. Our simulations reveal that a solar-type star with a stellar density profile of n=3 disrupted by a 10^6 solar mass black hole produces $sim20$ clumps of masses in the range of 0.1 to 12 Jupiter masses. The mass fallback rate decays with time, with pronounced spikes from early to late time. The spikes provide evidence for the clumps of the returning debris, while the clumps on the unbound debris can be potentially freely-floating planets and brown dwarfs. This ionization and dissociation induced fragmentation on a tidally disrupted star are a promising candidate mechanism to form low-mass stars to planets around an SMBH.
Isophotal analysis of M87, using data from the Advanced Camera for Surveys, reveals a projected displacement of 6.8 +/- 0.8 pc (~ 0.1 arcsec) between the nuclear point source (presumed to be the location of the supermassive black hole, SMBH) and the photo-center of the galaxy. The displacement is along a position angle of 307 +/- 17 degrees and is consistent with the jet axis. This suggests the active SMBH in M87 does not currently reside at the galaxy center of mass, but is displaced in the counter-jet direction. Possible explanations for the displacement include orbital motion of an SMBH binary, gravitational perturbations due to massive objects (e.g., globular clusters), acceleration by an asymmetric or intrinsically one-sided jet, and gravitational recoil resulting from the coalescence of an SMBH binary. The displacement direction favors the latter two mechanisms. However, jet asymmetry is only viable, at the observed accretion rate, for a jet age of >0.1 Gyr and if the galaxy restoring force is negligible. This could be the case in the low density core of M87. A moderate recoil ~1 Myr ago might explain the disturbed nature of the nuclear gas disk, could be aligned with the jet axis, and can produce the observed offset. Alternatively, the displacement could be due to residual oscillations resulting from a large recoil that occurred in the aftermath of a major merger any time in the last 1 Gyr.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا