اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدThermal Stability of Thermoelectric Materials via In Situ Resistivity Measurements
110
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
An experimental setup for determining the electrical resistivity of several types of thermoelectric materials over the temperature range 20 < T < 550 C is described in detail. One resistivity measurement during temperature cycling is also explained for Cu0.01Bi2Te2.7Se0.3 while a second measurement is made on Yb0.35Co4Sb12 as a function of time at 400 C. Both measurements confirm that the materials are thermally stable for the temperature range and time period measured. Measurements made during temperature cycling show an irreversible decrease in the electrical resistivity of Cu0.01Bi2Te2.7Se0.3 when the measuring temperature exceeds the pressing temperature. Several other possible uses of such a system include but are not limited to studying the effects of annealing and/or oxidation as a function of both temperature and time.
قيم البحث
اقرأ أيضاً
Thermoelectric devices that utilize the Seebeck effect convert heat flow into electrical energy and are highly desirable for the development of portable, solid state, passively-powered electronic systems. The conversion efficiencies of such devices a
re quantified by the dimensionless thermoelectric figure of merit (ZT), which is proportional to the ratio of a devices electrical conductance to its thermal conductance. High ZT (>2) has been achieved in materials via all-scale hierarchical architecturing. This efficiency holds at high temperatures (700K~900K) but quickly diminishes at lower temperatures. In this paper, a recently-fabricated two-dimensional (2D) semiconductor called phosphorene (monolayer black phosphorus) is assessed for its thermoelectric capabilities. First-principles and model calculations reveal that phosphorene possesses spatially-anisotropic electrical and thermal conductances. The prominent electrical and thermal conducting directions are orthogonal to one another, enhancing the ratio of these conductances. As a result, ZT can reach 2.5 (the criterion for commercial deployment) along the armchair direction of phosphorene at T=500K and is greater than 1 even at room temperature given moderate doping (~2 x 10^16 m-2). Ultimately, phosphorene stands out as an environmentally sound thermoelectric material with unprecedented qualities: intrinsically, it is a mechanically flexible material that converts heat energy with high efficiency at low temperatures (~ 300K) - one whose performance does not require any sophisticated engineering techniques.
We report $^{59}$Co, $^{93}$Nb, and $^{121}$Sb nuclear magnetic resonance (NMR) measurements combined with density functional theory (DFT) calculations on a series of half-Heusler semiconductors, including NbCoSn, ZrCoSb, TaFeSb and NbFeSb, to better
understand their electronic properties and general composition-dependent trends. These materials are of interest as potentially high efficiency thermoelectric materials. Compared to the other materials, we find that ZrCoSb tends to have a relatively large amount of local disorder, apparently antisite defects. This contributes to a small excitation gap corresponding to an impurity band near the band edge. In NbCoSn and TaFeSb, Curie-Weiss-type behavior is revealed, which indicates a small density of interacting paramagnetic defects. Very large paramagnetic chemical shifts are observed associated with a Van Vleck mechanism due to closely spaced $d$ bands splitting between the conduction and valence bands. Meanwhile, DFT methods were generally successful in reproducing the chemical shift trend for these half-Heusler materials, and we identify an enhancement of the larger-magnitude shifts, which we connect to electron interaction effects. The general trend is connected to changes in $d$-electron hybridization across the series.
Whether porosity can effectively improve thermoelectric performance is still an open question. Herein we report that thermoelectric performance can be significantly enhanced by creating porosity in n-type Mg3.225Mn0.025Sb1.5Bi0.49Te0.01, with a ZT of
~0.9 at 323 K and ~1.6 at 723 K, making the average ZT much higher for better performance. The large improvement at room temperature is significant considering that such a ZT value is comparable to the best ZT at this temperature in n-type Bi2Te3. The enhancement was mainly from the improved electrical mobility and multi-scale phonon scattering, particularly from the well-dispersed bismuth nano-precipitates in the porous structure. We further extend this approach to other thermoelectric materials such as half-Heuslers Nb0.56V0.24Ti0.2FeSb and Hf0.25Zr0.75NiSn0.99Sb0.01 and Bi0.5Sb1.5Te3 showing similar improvements, further advancing thermoelectric materials for applications.
The transverse thermoelectric effect refers to the conversion of a temperature gradient into a transverse charge current, or vice versa, which appears in a conductor under a magnetic field or in a magnetic material with spontaneous magnetization. Amo
ng such phenomena, the anomalous Nernst effect in magnetic materials has been receiving increased attention from the viewpoints of fundamental physics and thermoelectric applications owing to the rapid development of spin caloritronics and topological materials science. In this research trend, a conceptually different transverse thermoelectric conversion phenomenon appearing in thermoelectric/magnetic hybrid materials has been demonstrated, enabling the generation of a large transverse thermopower. Here, we review the recent progress in fundamental and applied studies on the transverse thermoelectric generation using magnetic materials. We anticipate that this perspective will further stimulate research activities on the transverse thermoelectric generation and lead to the development of next-generation thermal energy harvesting and heat-flux sensing technologies.
In-situ NMR spin-lattice relaxation measurements were performed on several vapor deposited ices. The measurements, which span more than 6 orders of magnitude in relaxation times, show a complex spin-lattice relaxation pattern that is strongly depende
nt on the growth conditions of the sample. The relaxation patterns change from multi-timescale relaxation for samples grown at temperatures below the amorphous-crystalline transition temperature to single exponential recovery for samples grown above the transition temperature. The slow-relaxation contribution seen in cold-grown samples exhibits a temperature dependence, and becomes even slower after the sample is annealed at 200K. The fast-relaxation contribution seen in these samples, does not seem to change or disappear even when heating to temperatures where the sample is evaporated. The possibility that the fast relaxation component is linked to the microporous structures in amorphous ice samples is further examined using an environmental electron scanning microscope. The images reveal complex meso-scale microporous structures which maintain their morphology up to their desorption temperatures. These findings, support the possibility that water molecules at pore surfaces might be responsible for the fast-relaxation contribution. Furthermore, the results of this study indicate that the pore-collapse dynamics observed in the past in amorphous ices using other experimental techniques, might be effectively inhibited in samples which are grown by relatively fast vapor deposition.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
