اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدPorosity-mediated High-performance Thermoelectric Materials
92
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Whether porosity can effectively improve thermoelectric performance is still an open question. Herein we report that thermoelectric performance can be significantly enhanced by creating porosity in n-type Mg3.225Mn0.025Sb1.5Bi0.49Te0.01, with a ZT of ~0.9 at 323 K and ~1.6 at 723 K, making the average ZT much higher for better performance. The large improvement at room temperature is significant considering that such a ZT value is comparable to the best ZT at this temperature in n-type Bi2Te3. The enhancement was mainly from the improved electrical mobility and multi-scale phonon scattering, particularly from the well-dispersed bismuth nano-precipitates in the porous structure. We further extend this approach to other thermoelectric materials such as half-Heuslers Nb0.56V0.24Ti0.2FeSb and Hf0.25Zr0.75NiSn0.99Sb0.01 and Bi0.5Sb1.5Te3 showing similar improvements, further advancing thermoelectric materials for applications.
قيم البحث
اقرأ أيضاً
High-performance thermoelectric oxides could offer a great energy solution for integrated and embedded applications in sensing and electronics industries. Oxides, however, often suffer from low Seebeck coefficient when compared with other classes of
thermoelectric materials. In search of high-performance thermoelectric oxides, we present a comprehensive density functional investigation, based on GGA$+U$ formalism, surveying the 3d and 4d transition-metal-containing ferrites of the spinel structure. Consequently, we predict MnFe$_2$O$_4$ and RhFe$_2$O$_4$ have Seebeck coefficients of $sim pm 600$ $mu$V K$^{-1}$ at near room temperature, achieved by light hole and electron doping. Furthermore, CrFe$_2$O$_4$ and MoFe$_2$O$_4$ have even higher ambient Seebeck coefficients at $sim pm 700$ $mu$V K$^{-1}$. In the latter compounds, the Seebeck coefficient is approximately a flat function of temperature up to $sim 700$ K, offering a tremendous operational convenience. Additionally, MoFe$_2$O$_4$ doped with $10^{19}$ holes/cm$^3$ has a calculated thermoelectric power factor of $689.81$ $mu$W K$^{-2}$ m$^{-1}$ at $300$ K, and $455.67$ $mu$W K$^{-2}$ m$^{-1}$ at $600$ K. The thermoelectric properties predicted here can bring these thermoelectric oxides to applications at lower temperatures traditionally fulfilled by more toxic and otherwise burdensome materials.
The electronic and transport properties of the half-Heusler compound LaPtSb are investigated by performing first-principles calculations combined with semi-classical Boltzmann theory and deformation potential theory. Compared with many typical half-H
eusler compounds, the LaPtSb exhibits obviously larger power factor at room temperature, especially for the n-type system. Together with the very low lattice thermal conductivity, the thermoelectric figure of merit (ZT) of LaPtSb can be optimized to a record high value of 2.2 by fine tuning the carrier concentration.
It is well known that the efficiency of a good thermoelectric material should be optimized with respect to doping concentration. However, much less attention has been paid to the optimization of the dopants energy level. Thermoelectric materials dope
d with shallow levels may experience a dramatic reduction in their figures of merit at high temperatures due to the excitation of minority carriers that reduces the Seebeck coefficient and increases bipolar heat conduction. Doping with deep level impurities can delay the excitation of minority carriers as it requires a higher temperature to ionize all dopants. We find through modeling that, depending on the material type and temperature range of operation, different impurity levels (shallow or deep) will be desired to optimize the efficiency of a thermoelectric material. For different materials, we further clarify where the most preferable position of the impurity level within the band gap falls. Our research provides insights in choosing the most appropriate dopants for a thermoelectric material in order to maximize the device efficiency.
The high-throughput (HT) computational method is a useful tool to screen high performance functional materials. In this work, using the deformation potential method under the single band model, we evaluate the carrier relaxation time and establish an
electrical descriptor (c{hi}) characterized by the carrier effective masses based on the simple rigid band approximation. The descriptor (c{hi}) can be used to reasonably represent the maximum power factor without solving the electron Boltzmann transport equation. Additionally, the Gruneisen parameter ({gamma}), a descriptor of the lattice anharmonicity and lattice thermal conductivity, is efficiently evaluated using the elastic properties, omitting the costly phonon calculations. Applying two descriptors (c{hi} and {gamma}) to binary chalcogenides, we HT compute 243 semiconductors and screen 50 promising thermoelectric materials. For these theoretically determined compounds, we successfully predict some previously experimentally and theoretically investigated promising thermoelectric materials. Additionally, 9 p-type and 14 n-type previously unreported binary chalcogenides are also predicted as promising thermoelectric materials. Our work provides not only new thermoelectric candidates with perfect crystalline structure for the future investigations, but also reliable descriptors to HT screen high performance thermoelectric materials.
It was generally assumed that weak van der Waals interactions exist between neighboring layers in the two-dimensional group-IV chalcogenides. Using PbSe as a prototypal example, however, we find additional strong coupling between the Pb-Pb layers, as
evidenced by detailed analysis of the differential charge density. The coupling resembles covalent-like bond and exhibits strong harmonicity around the equilibrium distance, which can be fine tuned to obviously reduce the phonon thermal conductivity but slightly change the electronic transport of PbSe. As a consequence, a maximum ZT value of 2.5 can be realized at 900 K for the p-type system. Our work offers an effective and feasible design strategy to enhance the thermoelectric performance of similar layered structures.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
