اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدHigh temperature thermoelectric response of double-doped SrTiO$_3$ epitaxial films
224
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
SrTiO$_3$ is a promising $n$-type oxide semiconductor for thermoelectric energy conversion. Epitaxial thin films of SrTiO$_3$ doped with both La and oxygen vacancies have been synthesized by pulsed laser deposition (PLD). The thermoelectric and galvanomagnetic properties of these films have been characterized at temperatures ranging from 300 K to 900 K and are typical of a doped semiconductor. Thermopower values of double-doped films are comparable to previous studies of La doped single crystals at similar carrier concentrations. The highest thermoelectric figure of merit ($ZT$) was measured to be 0.28 at 873 K at a carrier concentration of $2.5times10^{21}$ cm$^{-3}$.
قيم البحث
اقرأ أيضاً
We developed a theory of electric and thermoelectric conductivity of lightly doped SrTiO$_3$ in the non-degenerate region $k_B T geq E_F$, assuming that the major source of electron scattering is their interaction with soft transverse optical phonons
present due to proximity to ferroelectric transition. We have used kinetic equation approach within relaxation-time approximation and we have determined energy-dependent transport relaxation time $tau(E)$ by the iterative procedure. Using electron effective mass $m$ and electron-transverse phonon coupling constant $lambda$ as two fitting parameters, we are able to describe quantitatively a large set of the measured temperature dependences of resistivity $R(T)$ and Seebeck coefficient $mathcal{S}(T)$ for a broad range of electron densities studied experimentally in recent paper [1]. In addition, we calculated Nernst ratio $ u=N/B$ in the linear approximation over weak magnetic field in the same temperature range.
By inserting a SrZrO$_3$ buffer layer between the film and the substrate, we demonstrate a significant reduction of the threading dislocation density with an associated improvement of the electron mobility in La:BaSnO$_3$ films. A room temperature mo
bility of 140 cm$^2$ V$^{-1}text{s}^{-1}$ is achieved for 25-nm-thick films without any post-growth treatment. The density of threading dislocations is only $4.9times 10^{9}$ cm$^{-2}$ for buffered films prepared on (110) TbScO$_3$ substrates by pulsed laser deposition.
We synthesized strontium titanate SrTiO$_3$ (STO), Zr doped $text{Sr}_text{1-x}text{Zr}_text{x}text{Ti}text{O}_3$ and (Zr, Ni) co-doped $text{Sr}_text{1-x}text{Zr}_text{x}text{Ti}_text{1-y}text{Ni}_text{y}text{O}_3$ samples using solid state reaction
technique to report their structural, electrical and magnetic properties. The cubic $Pm$-$3m$ phase of the synthesized samples has been confirmed using Rietveld analysis of the powder X-ray diffraction pattern. The grain size of the synthesized materials was reduced significantly due to Zr doping as well as (Zr, Ni) co-doping in STO. The chemical species of the samples were identified using energy-dispersive X-ray spectroscopy. We observed forbidden first order Raman scattering at 148, 547 and 797 cm$^{-1}$ which may indicate nominal loss of inversion symmetry in cubic STO. The absence of absorption at 500 cm$^{-1}$ and within 600-700 cm$^{-1}$ band in Fourier Transform Infrared spectra corroborates Zr and Ni as substitutional dopants in our samples. Due to 4% Zr doping in $text{Sr}_text{0.96}text{Zr}_text{0.04}text{Ti}text{O}_3$ sample dielectric constant, remnant electric polarization, remnant magnetization and coercivity were increased. Notably, in the case of 4% Zr and 10% Ni co-doping we have observed clearly the existence of both FE and FM hysteresis loops in $text{Sr}_{0.96}text{Zr}_{0.04}text{Ti}_{0.90}text{Ni}_{0.10}text{O}_3$ sample. In this co-doped sample, the remnant magnetization and coercivity were increased by $sim$1 and $sim$2 orders of magnitude respectively as compared to those of undoped STO. The coexistence of FE and FM orders in (Zr, Ni) co-doped STO might have the potential for interesting multiferroic applications.
Properties of complex oxide thin films can be tuned over a range of values as a function of mismatch, composition, orientation, and structure. Here, we report a strategy for growing structured epitaxial thermoelectric thin films leading to improved S
eebeck coefficient. Instead of using single-crystal sapphire substrates to support epitaxial growth, Ca$_3$Co$_4$O$_9$ films are deposited, using the Pulsed Laser Deposition technique, onto Al$_2$O$_3$ polycrystalline substrates textured by Spark Plasma Sintering. The structural quality of the 2000 AA thin film was investigated by Transmission Electron Microscopy, while the crystallographic orientation of the grains and the epitaxial relationships were determined by Electron Back Scatter Diffraction. The use of a polycrystalline ceramic template leads to structured films that are in good local epitaxial registry. The Seebeck coefficient is about 170 $mu$V/K at 300 K, a typical value of misfit material with low carrier density. This high-throughput process, called combinatorial substrate epitaxy, appears to facilitate the rational tuning of functional oxide films, opening a route to the epitaxial synthesis of high quality complex oxides.
We report on the temperature and electric field driven evolution of the magnetoresistance lineshape at an interface between Ni/AlO$_x$ and Nb-doped SrTiO$_3$. This is manifested as a superposition of the Lorentzian lineshape due to spin accumulation
and a parabolic background related to tunneling anisotropic magnetoresistance (TAMR). The characteristic Lorentzian line shape of the spin voltage is retrieved only at low temperatures and large positive applied bias. This is caused by the reduction of electric field at large positive applied bias which results in a simultaneous reduction of the background TAMR and a sharp enhancement in spin injection. Such mechanisms to tune magnetoresistance are uncommon in conventional semiconductors.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
