اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدSuperconducting transition in Nb nanowires fabricated using focused ion beam
139
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Making use of focused Ga-ion beam (FIB) fabrication technology, the evolution with device dimension of the low-temperature electrical properties of Nb nanowires has been examined in a regime where crossover from Josephson-like to insulating behaviour is evident. Resistance-temperature data for devices with a physical width of order 100 nm demonstrate suppression of superconductivity, leading to dissipative behaviour that is shown to be consistent with the activation of phase-slip below Tc. This study suggests that by exploiting the Ga-impurity poisoning introduced by the FIB into the periphery of the nanowire, a central superconducting phase-slip nanowire with sub-10 nm dimensions may be engineered within the core of the nanowire.
قيم البحث
اقرأ أيضاً
In a recent paper Tettamanzi et al (2009 Nanotechnology bf{20} 465302) describe the fabrication of superconducting Nb nanowires using a focused ion beam. They interpret their conductivity data in the framework of thermal and quantum phase slips below
$T_c$. In the following we will argue that their analysis is inappropriate and incomplete, leading to contradictory results. Instead, we propose an interpretation of the data within a SN proximity model.
In this communication we present our response to the recent comment of A. Engel regarding our paper on FIB- fabricated Nb nanowires (see Vol. 20 (2009) Pag. 465302). After further analysis and additional experimental evidence, we conclude that our in
terpretation of the experimental results in light of QPS theory is still valid when compared with the alternative proximity-based model as proposed by A. Engel.
We have used a neon focused-ion-beam to fabricate both nanoscale Nb Dayem bridges and NbN phase-slip nanowires located at the short-circuited end of quarter-wavelength coplanar waveguide resonators. The Dayem bridge devices show flux-tunability and i
ntrinsic quality factor exceeding 10,000 at 300 mK up to local fields of at least 60 mT. The NbN nanowires show signatures of incoherent quantum tunnelling of flux at 300 mK.
Superconducting nanowires, with a critical temperature of 5.2 K, have been synthesized using an ion-beam-induced deposition, with a Gallium focused ion beam and Tungsten Carboxyl, W(CO)6, as precursor. The films are amorphous, with atomic concentrati
ons of about 40, 40, and 20 % for W, C, and Ga, respectively. Zero Kelvin values of the upper critical field and coherence length of 9.5 T and 5.9 nm, respectively, are deduced from the resistivity data at different applied magnetic fields. The critical current density is Jc= 1.5 10^5 A/cm2 at 3 K. This technique can be used as a template-free fabrication method for superconducting devices.
We report the fabrication of a directly coupled superconducting quantum interference device (SQUID) magnetometer in MgB2 using a focused ion beam (FIB) to create Josephson junctions in a 70 nm thick film of MgB2. The SQUID shows a voltage modulation
(deltaV) of 175 mV at a temperature of 10 K and operates over a temperature range from 10 K to 24 K. We find excellent agreement between the measured maximum transfer functions and those predicted by theory. We have measured the magnetic flux noise at 20 K to be as low as 14 micro Phi-0 per root Hz.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
