اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدDust depletion, chemical uniformity and environment of CaII H&K quasar absorbers
159
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
CaII 3934,3969 absorbers, which are likely to be a subset of damped Lyman alpha systems, are the most dusty quasar absorbers known, with an order of magnitude more extinction in E(B-V) than other absorption systems. There is also evidence that CaII absorbers trace galaxies with more ongoing star-formation than the average quasar absorber. Despite this, relatively little is known in detail about these unusual absorption systems. Here we present the first high resolution spectroscopic study of 19 CaII quasar absorbers, in the range 0.6<= z_abs<=1.2, with W3934>=0.2A. Their general depletion patterns are similar to measurements in the warm halo phase of the Milky Way and Magellanic Clouds ISM. Dust depletions and alpha-enrichments profiles of sub-samples of 7 and 3 absorbers, respectively, are measured using a combination of Voigt profile fitting and apparent optical depth techniques. Deviations in [Cr/Zn]~0.3+-0.1dex and in [Si/Fe]>~0.8+-0.1dex are detected across the profile of one absorber, which we attribute to differential dust depletion. The remaining absorbers have <0.3dex (3sigma limit) variation in [Cr/Zn], much like the general DLA population, though the dustiest CaII absorbers remain relatively unprobed in our sample. A limit on electron densities in CaII absorbers, n_e<0.1cm^-3, is derived using the ratio of neutral and singly ionised species, assuming a MW-like radiation field. These electron densities may imply hydrogen densities sufficient for the presence of molecular hydrogen in the absorbers. The CaII absorber sample comprises a wide range of velocity widths, v_90=50-470km/s, and velocity structures, thus a range of physical models for their origin, from simple discs to galactic outflows and mergers, would be required to explain the observations.
قيم البحث
اقرأ أيضاً
We present 13 new 2175 {AA} dust absorbers at z_abs = 1.0 - 2.2 towards background quasars from the Sloan Digital Sky Survey. These absorbers are examined in detail using data from the Echelle Spectrograph and Imager (ESI) on the Keck II telescope. M
any low-ionization lines including Fe II, Zn II, Mg II, Si II, Al II, Ni II, Mn II, Cr II, Ti II, and Ca II are present in the same absorber which gives rise to the 2175 {AA} bump. The relative metal abundances (with respect to Zn) demonstrate that the depletion patterns of our 2175 {AA} dust absorbers resemble that of the Milky Way clouds although some are disk-like and some are halo-like. The 2175 {AA} dust absorbers have significantly higher depletion levels compared to literature Damped Lyman-{alpha} absorbers (DLAs) and subDLAs. The dust depletion level indicator [Fe/Zn] tends to anti-correlate with bump strengths. The velocity profiles from the Keck/ESI spectra also provide kinematical information on the dust absorbers. The dust absorbers are found to have multiple velocity components with velocity widths extending from ~100 to ~ 600 km/s, which are larger than those of most DLAs and subDLAs. Assuming the velocity width is a reliable tracer of stellar mass, the host galaxies of 2175 {AA} dust absorbers are expected to be more massive than DLA/subDLA hosts. Not all of the 2175 {AA} dust absorbers are intervening systems towards background quasars. The absorbers towards quasars J1006+1538 and J1047+3423 are proximate systems that could be associated with the quasar itself or the host galaxy.
The diffuse interstellar bands (DIBs) probably arise from complex organic molecules whose strength in local galaxies correlates with neutral hydrogen column density, N(HI), and dust reddening, E(B-V). Since CaII absorbers in quasar (QSO) spectra are
posited to have high N(HI) and significant E(B-V), they represent promising sites for the detection of DIBs at cosmological distances. Here we present the results from the first search for DIBs in 9 CaII-selected absorbers at 0.07 < z_abs < 0.55. We detect the 5780Ang DIB in one line of sight at z_abs = 0.1556; this is only the second QSO absorber in which a DIB has been detected. Unlike the majority of local DIB sight-lines, both QSO absorbers with detected DIBs show weak 6284Ang absorption compared with the 5780Ang band. This may be indicative of different physical conditions in intermediate redshift QSO absorbers compared with local galaxies. Assuming that local relations between the 5780Ang DIB strength and N(HI) and E(B-V) apply in QSO absorbers, DIB detections and limits can be used to derive N(HI) and E(B-V). For the one absorber in this study with a detected DIB, we derive E(B-V) = 0.23mag and log[N(HI)] >= 20.9, consistent with previous conclusions that CaII systems have high HI column densities and significant reddening. For the remaining 8 CaII-selected absorbers with 5780Ang DIB non-detections, we derive E(B-V) upper limits of 0.1-0.3mag.
We present results of the MUSE-ALMA Halos, an ongoing study of the Circum-Galactic Medium (CGM) of low redshift galaxies (z < 1.4), currently comprising 14 strong HI absorbers in five quasar fields. We detect 43 galaxies associated with absorbers dow
n to star formation rate (SFR) limits of 0.01-0.1 solar masses/yr, found within impact parameters (b) of 250 kpc from the quasar sightline. Excluding the targeted absorbers, we report a high detection rate of 89 per cent and find that most absorption systems are associated with pairs or groups of galaxies (three to eleven members). We note that galaxies with the smallest impact parameters are not necessarily the closest to the absorbing gas in velocity space. Using a multi-wavelength dataset (UVES/HIRES, HST, MUSE), we combine metal and HI column densities, allowing for derivation of the lower limits of neutral gas metallicity as well as emission line diagnostics (SFR, metallicities) of the ionised gas in the galaxies. We find that groups of associated galaxies follow the canonical relations of N(HI) -- b and W_r(2796) -- b, defining a region in parameter space below which no absorbers are detected. The metallicity of the ISM of associated galaxies, when measured, is higher than the metallicity limits of the absorber. In summary, our findings suggest that the physical properties of the CGM of complex group environments would benefit from associating the kinematics of individual absorbing components with each galaxy member.
We present chromospheric activity index $Srm_{HK}$ measurements for over 13,000 F, G and K disk stars with high signal-to-noise ratio ($>$ 60) spectra in the Sloan Digital Sky Survey (SDSS) Data Release 7 (DR7) spectroscopic sample. A parameter $delt
a$S is defined as the difference between $Srm_{HK}$ and a `zero emission line fitted by several of the most inactive stars. The $Srm_{HK}$ indices of subgiant stars tend to be much lower than dwarfs, which provide a way to distinguish dwarfs and giants with relatively low resolution spectra. Cooler stars are generally more active and display a larger scatter than hotter stars. Stars associated with the thick disk are in general less active than those of the thin disk. The fraction of K dwarfs that are active drops with vertical distance from the Galactic plane. Metallicity affects $Srm_{HK}$ measurements differently among F, G and K dwarfs in this sample. Using the open clusters NGC 2420, M67 and NGC6791 as calibrations, ages of most field stars in this SDSS sample range from 3-8 Gyr.
We aim at assessing what are the most dominant dust species or types, including silicate and iron oxide grains present in the ISM, by using recent observations of dust depletion of galaxies at various evolutionary stages. We use the observed elementa
l abundances in dust of several metals (O, S, Si, Mg, and Fe) in different environments, considering systems with different metallicities and dust content, namely damped Lyman-{alpha} absorbers (DLAs) towards quasars and the Galaxy. We derive a possible dust composition by computationally finding the statistically expected elemental abundances in dust assuming a set of key dust species with the iron content as a free parameter. Carbonaceous dust is not considered in the present study. Metallic iron (likely in the form of inclusions in silicate grains) and iron oxides is an important component of the mass composition of carbon-free dust. Iron oxides make up a significant mass fraction (~1/4 in some cases) of the oxygen-bearing dust and there are good reasons to believe that metallic iron constitutes a similar mass fraction of dust. Wustite (FeO) could be a simple explanation for the depletion of iron and oxygen because it is easily formed. There appears to be no silicate species clearly dominating the silicate mass, but rather a mix of iron-poor as well as iron-rich olivine and pyroxene. To what extent sulphur depletion is due to sulfides remains unclear. In general, there seems to be little evolution of the dust composition (not considering carbonaceous dust) from low-metallicity systems to the Galaxy.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
