اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدTip streaming from drops flowing in a spiral microchannel
155
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
This fluid dynamics video shows drops of water being transported by a mean flow of oil, in a microchannel shaped as a logarithmic spiral. The channel shape means that the drops are submitted to an increasing shear and elongation as they flow nearer to the center of the spiral. A critical point is reached at which a long singular tail is observed behind the drops, indicating that the drops are accelerating. This is called Tip streaming.
قيم البحث
اقرأ أيضاً
Mixing in numerous medical and chemical applications, involving overly long microchannels, can be enhanced by inducing flow instabilities. The channel length, is thus shortened in the inertial microfluidics regime due to the enhanced mixing, thereby
rendering the device compact and portable. Motivated by the emerging applications of lab-on-a-CD based compact microfluidic devices, we analyze the linear stability of rotationally actuated microchannel flows commonly deployed for biochemical and biomedical applications. The solution of the coupled system of Orr-Sommerfeld (OS) and Squire (SQ) equations yields the growth rate and the neutral curve of the two types of instabilities: (i) the Tollmien-Schlichting (TS) wave and (ii) the Coriolis force-driven instability. We report the existence of four distinct unstable modes (Modes I-IV) at low Reynolds numbers of which only the existence of Mode I is previously known for the present flow configuration. Furthermore, Modes I and II exhibit competing characteristics. We infer that Modes III and IV might cause strong mixing locally by virtue of strong velocity perturbation in proximity to the interface. We quantify the potential of all the modes to induce such localized mixing near the interface using the notion of penetration depth. Further, insight into the mechanism of energy transfer, drawn from the evaluation of kinetic-energy budget, reveals that the Reynolds stress first transfers energy from the mean flow to the streamwise velocity fluctuations. The Coriolis force, thereafter, redistributes the axial momentum into spanwise and wall-normal directions, generating the frequently observed roll-cell structures. A qualitative comparison of our predictions with reported experiments on roll-cells indicates co-existence of Modes I and II.
A flowing pair of particles in inertial microfluidics gives important insights into understanding and controlling the collective dynamics of particles like cells or droplets in microfluidic devices. They are applied in medical cell analysis and engin
eering. We study the dynamics of a pair of solid particles flowing through a rectangular microchannel using lattice Boltzmann simulations. We determine the inertial lift force profiles as a function of the two particle positions, their axial distance, and the Reynolds number. Generally, the profiles strongly differ between particles leading and lagging in flow and the lift forces are enhanced due to the presence of a second particle. At small axial distances, they are determined by viscous forces, while inertial forces dominate at large separations. Depending on the initial conditions, the two-particle lift forces in combination with the Poiseuille flow give rise to three types of unbound particle trajectories, called moving-apart, passing, and swapping, and one type of bound trajectories, where the particles perform damped oscillations. The damping rate scales with Reynolds number squared, since inertial forces are responsible for driving the particles to their steady-state positions.
Liquid oxygen, which is paramagnetic, also undergoes Leidenfrost effect at room temperature. In this article, we first study the deformation of oxygen drops in a magnetic field and show that it can be described via an effective capillary length, whic
h includes the magnetic force. In a second part, we describe how these ultra-mobile drops passing above a magnet significantly slow down and can even be trapped. The critical velocity below which a drop is captured is determined from the deformation induced by the field.
Instability mechanism based on Coriolis force, on a rapidly rotating portable device handling shear thinning fluids such as blood, is of utmost importance for eventual detection of diseases by mixing with the suitable reagents. Motivated by this prop
osition, the present study renders a modal stability analysis of shear thinning fluids in a rotating microchannel modelled by the Carreau rheological law. When a microchannel is engraved a rotating compact disc (CD) based device, the centrifugal force acts as the driving force that actuates the flow and the Coriolis force enhances the mixing process in significantly short span by destabilizing the flow. An OrrSommerfeld-Squire analysis is performed to explore the role of these forces on the linear stability of rotating shear-thinning flow. Reported results on shear thinning flow with streamwise disturbances indicate that the critical Reynolds number for the flow transition with viscosity perturbation is nearly half of that of the critical value for the same without viscosity perturbation. In sharp contrast, the present analysis considering spanwise disturbances reveals that the critical Reynolds numbers with and without viscosity perturbation remain virtually unaltered under rotational effects. However, the viscosity variation has no significant influence on the Coriolis force-based instability. Numerical results confirm that a momentous destabilization is possible by aid of the Coriolis force via generating secondary flow inside the channel. Interestingly, the roll cells corresponding to the instabilities at lower time constants exhibit the existence of two distinct vortices, and the centre of the stronger one is essentially settled towards the unstable stratified region. Moreover, for a higher value of the time constant, only one vortex occupies the entire channel.
We report an experimental study of liquid drops moving against gravity, when placed on a vertically vibrating inclined plate, which is partially wetted by the drop. The frequency of vibrations ranges from 30 to 200 Hz, and, above a threshold in vibra
tion acceleration, drops experience an upward motion. We attribute this surprising motion to the deformations of the drop, as a consequence of an up or down symmetry breaking induced by the presence of the substrate. We relate the direction of motion to contact angle measurements. This phenomenon can be used to move a drop along an arbitrary path in a plane, without special surface treatments or localized forcing.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
