اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMeasurement Technique for Elastic and Mechanical Properties of Polycrystalline Silicon-Germanium Films Using Surface Acoustic Waves and Projection Masks
370
0
0.0
(
0
)
نشر من قبل
EDA Publishing Association
تاريخ النشر
2007
مجال البحث
الهندسة المعلوماتية
والبحث باللغة
English
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Using Rayleigh surface acoustic waves (SAW), the Youngs modulus, the density and the thickness of polycrystalline Silicon-Germanium (SiGe) films deposited on silicon and SiO2 were measured, in excellent agreement with theory. The dispersion curve of the propagating SAW is calculated with a Boundary Element Method (BEM)-Model based on Greens functions. The propagating SAW is generated with a nanosecond laser in a narrowband scheme projecting stripes from a mask on the surface of the sample. For this purpose a glass mask and a liquid crystal display (LCD) mask are used. The slope of the SAW is then measured using a probe beam setup. From the wavelength of the mask and the frequency of the measured SAW, the dispersion curve is determined point by point. Fitting the BEM-Model to the measured nonlinear dispersion curve provides several physical parameters simultaneously. In the present work this is demonstrated for the Youngs modulus, the density and the thickness of SiGe films. The results from the narrowband scheme measurement are in excellent agreement with separated measurements of the thickness (profilometer), the density (balance) and the Youngs modulus (nanoindenter).
قيم البحث
اقرأ أيضاً
Core-shell nanowires made of Si and Ge can be grown experimentally with excellent control for different sizes of both core and shell. We have studied the structural properties of Si/Ge and Ge/Si core-shell nanowires aligned along the $[110]$ directio
n, with diameters up to 10.2~nm and varying core to shell ratios, using linear scaling Density Functional Theory (DFT). We show that Vegards law, which is often used to predict the axial lattice constant, can lead to an error of up to 1%, underlining the need for a detailed emph{ab initio} atomistic treatment of the nanowire structure. We analyse the character of the intrinsic strain distribution and show that, regardless of the composition or bond direction, the Si core or shell always expands. In contrast, the strain patterns in the Ge shell or core are highly sensitive to the location, composition and bond direction. The highest strains are found at heterojunction interfaces and the surfaces of the nanowires. This detailed understanding of the atomistic structure and strain paves the way for studies of the electronic properties of core-shell nanowires and investigations of doping and structure defects.
A novel fabrication process, which uses wafer transfer and micro-electroplating technique, has been proposed and tested. In this paper, the effects of the diaphragm thickness and stress, the air-gap thickness, and the area ratio of acoustic holes to
backplate on the sensitivity of the condenser microphone have been demonstrated since the performance of the microphone depends on these parameters. The microphone diaphragm has been designed with a diameter and thickness of 1.9 mm and 0.6 $mu$m, respectively, an air-gap thickness of 10 $mu$m, and a 24% area ratio of acoustic holes to backplate. To obtain a lower initial stress, the material used for the diaphragm is polyimide. The measured sensitivities of the microphone at the bias voltages of 24 V and 12 V are -45.3 and -50.2 dB/Pa (at 1 kHz), respectively. The fabricated microphone shows a flat frequency response extending to 20 kHz.
We show that long-range and robust acoustic pulling can be achieved by using a pair of one-way chiral surface waves supported on the interface between two phononic crystals composed of spinning cylinders with equal but opposite spinning velocities em
bedded in water. When the chiral surface mode with a relative small Bloch wave vector is excited, the particle located in the interface waveguide will scatter the excited surface mode to another chiral surface mode with a greater Bloch wave vector, resulting in an acoustic pulling force, irrespective of the size and material of the particle. Thanks to the backscattering immunity of the chiral surface waves against local disorders, the particle can be pulled following a flexible trajectory as determined by the shape of the interface. As such, this new acoustic pulling scheme overcomes some of the limitations of the traditional acoustic pulling using structured beams, such as short pulling distances, straight-line type pulling and strong dependence on the scattering properties of the particle. Our work may also inspire the application of topological acoustics to acoustic manipulations.
Ultrafast two-color pump-probe measurements, involving coherent acoustic phonon (CAP) waves, have provided information simultaneously on the mechanical properties and on the electronic structure of ferromagnetic GaMnAs. The elastic constant C11 of Ga
1-xMnxAs (0.03<x<0.07) are observed to be systematically smaller than those of GaAs. Both C11 and Vs of GaMnAs are found to increase with temperature (78 K<T<295 K), again in contrast to the opposite behavior in GaAs. In addition, the fundamental bandgap (at E0 critical point) of Ga1-xMnxAs is found to shift slightly to higher energies with Mn concentration.
We theoretically investigate the use of Rayleigh surface acoustic waves (SAWs) for refractive index modulation in optical waveguides consisting of amorphous dielectrics. Considering low-loss Si$_3$N$_4$ waveguides with a standard core cross section o
f 4.4$times$0.03 $mu$m$^2$ size, buried 8 $mu$m deep in a SiO$_2$ cladding we compare surface acoustic wave generation in various different geometries via a piezo-active, lead zirconate titanate film placed on top of the surface and driven via an interdigitized transducer (IDT). Using numerical solutions of the acoustic and optical wave equations, we determine the strain distribution of the SAW under resonant excitation. From the overlap of the acoustic strain field with the optical mode field we calculate and maximize the attainable amplitude of index modulation in the waveguide. For the example of a near-infrared wavelength of 840 nm, a maximum shift in relative effective refractive index of 0.7x10$^{-3}$ was obtained for TE polarized light, using an IDT period of 30 - 35 $mu$m, a film thickness of 2.5 - 3.5 $mu$m, and an IDT voltage of 10 V. For these parameters, the resonant frequency is in the range 70 - 85 MHz. The maximum shift increases to 1.2x10$^{-3}$, with a corresponding resonant frequency of 87 MHz, when the height of the cladding above the core is reduced to 3 $mu$m. The relative index change is about 300-times higher than in previous work based on non-resonant proximity piezo-actuation, and the modulation frequency is about 200-times higher. Exploiting the maximum relative index change of 1.2$times$10$^{-3}$ in a low-loss balanced Mach-Zehnder modulator should allow full-contrast modulation in devices as short as 120 $mu$m (half-wave voltage length product = 0.24 Vcm).
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
