Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userSpatial homogeneity of optically switched semiconductor photonic crystals and of bulk semiconductors
92
0
0.0
(
0
)
Ask ChatGPT about the research
No Arabic abstract
This paper discusses free carrier generation by pulsed laser fields as a mechanism to switch the optical properties of semiconductor photonic crystals and bulk semiconductors on an ultrafast time scale. Requirements are set for the switching magnitude, the time-scale, the induced absorption as well as the spatial homogeneity, in particular for silicon at lambda= 1550 nm. Using a nonlinear absorption model, we calculate carrier depth profiles and define a homogeneity length l_hom. Homogeneity length contours are visualized in a plane spanned by the linear and two-photon absorption coefficients. Such a generalized homogeneity plot allows us to find optimum switching conditions at pump frequencies near v/c= 5000 cm^{-1} (lambda= 2000 nm). We discuss the effect of scattering in photonic crystals on the homogeneity. We experimentally demonstrate a 10% refractive index switch in bulk silicon within 230 fs with a lateral homogeneity of more than 30 micrometers. Our results are relevant for switching of modulators in absence of photonic crystals.
rate research
Read More
We propose an efficient method for spatial filtering of light beams by propagating them through 2D (also 3D) longitudinally chirped photonic crystals, i.e. through the photonic structures with fixed transverse lattice period and with the longitudinal lattice period varying along the direction of the beam propagation. We prove the proposed idea by numerically solving the paraxial propagation equation in refraction index-modulated media, and we evaluate the efficiency of the process by plane-wave-expansion analysis. The technique can be applied to filter (to clean) the packages of atomic waves (Bose condensates), as well improve the directionality of acoustic and mechanical waves.
Dissipative Kerr solitons (DKSs) have been generated via injection locking of chipscale microresonators to continuous-wave (CW) III-V lasers. This advance has enabled fully integrated hybrid microcomb systems that operate in turnkey mode and can access microwave repetition rates. Yet, CW-driven DKS exhibits low energy conversion efficiency and high optical power threshold, especially when the repetition rate is within the microwave range that is convenient for direct detection with off-the-shelf electronics. Efficient DKS can be generated by spatiotemporally structured light (i.e., pulsed pumping), which to date however has required complex cascaded modulators for pulse synthesis. Here we demonstrate a photonic integrated approach to pulsed pumping. By actively switching the bias current of injection-locked III-V semiconductor lasers with switching frequencies in the X-band and K-band microwave ranges, we pump a crystalline and integrated microresonators with coherent picosecond laser pulses, achieving DKS generation with stable repetition rates and lowering the required average pumping power by one order of magnitude to a record-setting level of a few milliwatts. In addition, we unveil the critical role of the phase profile of the pumping pulses, and for the first time implement phase engineering on the pulsed pumping scheme by either accessing a multimode lasing regime in the gain-switching mode or applying external chirping to support robust single-soliton generation. Our work leverages the advantages of gain switching technique and pulse pumping technique, and establishes the merits of combining distinct compact frequency comb platforms that enhance the potential of energy-efficient chipscale microcombs.
Optoelectronic components with adjustable parameters, from variable-focal-length lenses to spectral filters that can change functionality upon stimulation, have enormous technological importance. Tuning of such components is conventionally achieved by either micro- or nano-mechanical actuation of their consitutive parts, stretching or application of thermal stimuli. Here we report a new dielectric metasurface platform for reconfigurable optical components that are created with light in a non-volatile and reversible fashion. Such components are written, erased and re-written as two-dimensional binary or grey-scale patterns into a nanoscale film of phase change material by inducing a refractive-index-changing phase-transition with tailored trains of femtosecond pulses. We combine germanium-antimony-tellurium-based films optimized for high-optical-contrast ovonic switching with a sub-wavelength-resolution optical writing process to demonstrate technologically relevant devices: visible-range reconfigurable bi-chromatic and multi-focus Fresnel zone-plates, a super-oscillatory lens with sub-wavelength focus, a grey-scale hologram and a dielectric metamaterial with on-demand reflcetion and transmission resonances.
Quadrupole topological phases, exhibiting protected boundary states that are themselves topological insulators of lower dimensions, have recently been of great interest. Extensions of these ideas from current tight binding models to continuum theories for realistic materials require the identification of quantized invariants describing the bulk quadrupole order. Here we identify the analog of quadrupole order in Maxwells equations for a photonic crystal (PhC) and identify quadrupole topological photonic crystals formed through a band inversion process. Unlike prior studies relying on threaded flux, our quadrupole moment is quantized purely by crystalline symmetries, which we confirm using three independent methods: analysis of symmetry eigenvalues, numerical calculations of the nested Wannier bands, and the expectation value of the quadrupole operator. Furthermore, through the bulk-edge correspondence of Wannier bands, we reveal the boundary manifestations of nontrivial quadrupole phases as quantized polarizations at edges and bound states at corners. Finally, we relate the nontrivial corner states to the emergent phenomena of quantized fractional corner charges and a filling anomaly as first predicted in electronic systems. Our work paves the way to further explore higher-order topological phases in nanophotonic systems and our method of inducing quadrupole phase transitions is also applicable to other wave systems, such as electrons, phonons and polaritons.
We report systematic studies of plasmonic and photonic guiding modes in large-area chemical-vapor-deposition-grown graphene on nanostructured silicon substrates. Light interaction in graphene with substrate photonic crystals can be classified into four distinct regimes depending on the photonic crystal lattice constant and the various modal wavelengths (i.e. plasmonic, photonic and free-space). By optimizing the design of the substrate, these resonant modes can magnify the graphene absorption in infrared wavelength, for efficient modulators, filters, sensors and photodetectors on silicon photonic platforms.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
