Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userComplex shock structure in the western hot-spot of Pictor A
100
0
0.0
(
0
)
Authors
Curtis J. Saxton
Ask ChatGPT about the research
No Arabic abstract
We have carried out simulations of supersonic light jets in order to model the features observed in optical and radio images of the western hot-spot in the radio galaxy Pictor A. We have considered jets with density ratios eta=1e-2 - 1e-4, and Mach numbers ranging between 5 and 50. From each simulation, we have generated ray-traced maps of radio surface brightness at a variety of jet inclinations, in order to study the appearance of time-dependent luminous structures in the vicinity of the western hot-spot. We compare these rendered images with observed features of Pictor A. A remarkable feature of Pictor A observations is a bar-shaped filament inclined almost at right angles to the inferred jet direction and extending 24 (10.8 /h kpc) along its longest axis. The constraints of reproducing the appearance of this structure in simulations indicate that the jet of Pictor A lies nearly in the plane of the sky. The results of the simulation are also consistent with other features found in the radio image of Pictor A. This filament arises from the surging behaviour of the jet near the hot-spot; the surging is provoked by alternate compression and decompression of the jet by the turbulent backflow in the cocoon. We also examine the arguments for the jet in Pictor A being at a more acute angle to the line of sight and find that our preferred orientation is just consistent with the limits on the brightness ratio of the X-ray jet and counter-jet. We determine from our simulations, the structure function of hot-spot brightness and also the cumulative distribution of the ratio of intrinsic hot-spot brightnesses. The latter may be used to quantify the use of hot-spot ratios for the estimation of relativistic effects.
rate research
Read More
Images made with the VLBA have resolved the region in a nearby radio galaxy, Pictor A, where the relativistic jet that originates at the nucleus terminates in an interaction with the intergalactic medium, a so-called radio galaxy hot spot. This image provides the highest spatial resolution view of such an object to date (16 pc), more than three times better than previous VLBI observations of similar objects. The north-west Pictor A hot spot is resolved into a complex set of compact components, seen to coincide with the bright part of the hot spot imaged at arcsecond-scale resolution with the VLA. In addition to a comparison with VLA data, we compare our VLBA results with data from the HST and Chandra telescopes, as well as new Spitzer data. The presence of pc-scale components in the hot spot, identifying regions containing strong shocks in the fluid flow, leads us to explore the suggestion that they represent sites of synchrotron X-ray production, contributing to the integrated X-ray flux of the hot spot, along with X-rays from synchrotron self-Compton scattering. This scenario provides a natural explanation for the radio morphology of the hot spot and its integrated X-ray emission, leading to very different predictions for the higher energy X-ray spectrum compared to previous studies. From the sizes of the individual pc-scale components and their angular spread, we estimate that the jet width at the hot spot is in the range 70 - 700 pc, which is comparable to similar estimates in PKS 2153-69, 3C 205, and 4C 41.17. The lower limit in this range arises from the suggestion that the jet may dither in its direction as it passes through hot spot backflow material close to the jet termination point, creating a dentist drill effect on the inside of a cavity 700 pc in diameter.
Mid-infrared properties are reported of the west hot spot of the radio galaxy Pictor A with the Wide-field Infrared Survey Explorer (WISE). The mid-infrared counterpart to the hot spot, WISE J051926.26-454554.1, is listed in the AllWISE source catalog. The source was detected in all the four WISE photometric bands. A comparison between the WISE and radio images reinforces the physical association of the wise source to the hot spot. The WISE flux density of the source was carefully evaluated. A close investigation of the multi-wavelength synchrotron spectral energy distribution from the object reveals a mid-infrared excess at the wavelength of $lambda=22$ $mu$m with a statistical significance of $4.8 sigma$ over the simple power-law extrapolation from the synchrotron radio spectrum. The excess is reinforced by single and double cutoff power-law modeling of the radio-to-optical spectral energy distribution. The synchrotron cutoff frequency of the main and excess components was evaluated as $7.1 times 10^{14}$ Hz and $5.5 times 10^{13}$ Hz, respectively. From the cutoff frequency, the magnetic field of the emission region was constrained as a function of the region size. In order to interpret the excess component, an electron population different from the main one dominating the observed radio spectrum is necessary. The excess emission is proposed to originate in a sub structure within the hot spot, in which the magnetic field is by a factor of a few stronger than that in the minimum energy condition. The relation of the mid-infrared excess to the X-ray emission is briefly discussed.
A far-infrared counterpart to the west hot spot of the radio galaxy Pictor A is discovered with the Spectral and Photometric Imaging REceiver (SPIRE) onboard Herschel. The color-corrected flux density of the source is measured as $70.0 pm 9.9$ mJy at the wavelength of 350 $mu$m. A close investigation into its radio-to-optical spectrum indicates that the mid-infrared excess over the radio synchrotron component, detected with WISE and Spitzer, significantly contributes to the far-infrared band. Thanks to the SPIRE data, it is revealed that the spectrum of the excess is described by a broken power-law model subjected to a high-energy cutoff. By applying the radiative cooling break under continuous energy injection ($Delta alpha = 0.5$), the broken power-law model supports an idea that the excess originates in 10-pc scale substructures within the hot spot. From the break frequency, $ u_{rm b} = 1.6_{-1.0}^{+3.0} times 10^{12}$ Hz, the magnetic field was estimated as $Bsimeq1$-$4$ mG. This is higher than the minimum-energy magnetic field of the substructures by a factor of $3$--$10$. Even if the origin of the excess is larger than $sim 100$ pc, the magnetic field stronger than the minimum-energy field is confirmed. It is proposed that regions with a magnetic field locally boosted via plasma turbulence are observed as the substructures. The derived energy index below the break, $alpha sim 0.22$ (conservatively $<0.42$), is difficult to be attributed to the strong-shock acceleration ($alpha = 0.5$). Stochastic acceleration and magnetic reconnection are considered as a plausible alternative mechanism.
Magnetospheric accretion models predict that matter from protoplanetary disks accretes onto the star via funnel flows which follow the stellar field lines and shock on the stellar surface leaving a hot spot with a density gradient. Previous work has inferred different densities in the hot spot, but has not been sensitive to the radial density distribution. Attempts have been made to measure this with X-ray observations, but X-ray emission only traces a fraction of the hot spot and also coronal emission. Here we report periodic ultraviolet and optical light curves of the accreting star GM Aur that display a time lag of about 1 day between their peaks. The periodicity arises as the source of the ultraviolet and optical emission moves into and out of view as it rotates along with the star. The time-lag indicates a difference in the spatial distribution of ultraviolet and optical brightness over the stellar surface. Within the framework of the magnetospheric accretion model, this indicates a radial density gradient in a hot spot on the stellar surface since different density parts of the hot spot are expected to emit radiation at different wavelengths. These results are the first observational confirmation of the magnetospheric accretion models prediction of a density gradient in the hot spot and demonstrate the insights gained from focusing on the wavelengths where the bulk of the accretion energy can be observed.
Here we present detailed analysis of the distinct X-ray emission features present within the Eastern radio lobe of the Pictor A galaxy, around the jet termination region, utilising the data obtained from the Chandra X-ray Observatory. Various emission features have been selected for the study based on their enhanced X-ray surface brightness, including five sources that appear point-like, as well as three extended regions, one characterised by a filamentary morphology. For those, we perform a basic spectral analysis within the 0.5-7keV range. We also investigate various correlations between the X-ray emission features and the non-thermal radio emission, utilising the high-resolution radio maps from the Very Large Array at GHz frequencies. The main novel findings following from our analysis, regard the newly recognized bright X-ray filament located upstream of the jet termination region, extending for at least thirty kiloparsec (projected), and inclined with respect to the jet axis. For this feature, we observe a clear anti-correlation between the X-ray surface brightness and the polarized radio intensity, as well as a decrease in the radio rotation measure with respect to the surroundings. We speculate on the nature of the filament, in particular addressing a possibility that it is related to the presence of a hot X-ray emitting thermal gas, only partly mixed with the non-thermal radio/X-ray emitting electrons within the lobe, combined with the reversals in the lobes net magnetic field.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
