Subscribe to the gold package and get unlimited access to Shamra Academy
Register a new userExploration of lane-changing duration for heavy vehicles and passenger cars: a survival analysis approach
75
0
0.0
(
0
)
Added by
Yang Li
Publication date
2021
fields
Informatics Engineering
and research's language is
English
Ask ChatGPT about the research
No Arabic abstract
Lane-changing (LC) behavior describes the lateral movement of the vehicle from the current-lane to the target-lane while proceeding forward. Among the many research directions, LC duration (LCD) measures the total time it takes for a vehicle to travel from the current lane to the target lane, which is an indispensable indicator to characterize the LC behavior. Although existing research has made some achievements, less attention has been paid to the research of heavy vehicles LCD. Therefore, this paper aims to further explore the LCD between heavy vehicles and passenger cars. LC trajectories are extracted from the newly-released HighD dataset, which contains of 16.5 hours of measurement and over 11,000 vehicles. The survival function of LCD has been estimated, and the characteristic has been analyzed. Thereafter, the Accelerated Failure Time model is introduced to explore the influencing factors. Results demonstrate that the MST value of passenger cars and heavy vehicles is about 5.51s and 6.08s. The heavy vehicles would maintain a longer time-headway and distance-headway with preceding vehicle when performing LC. Nevertheless, these two factors do not significantly affect the LCD of heavy vehicles. Finally, the results and the modeling implications have been discussed. We hope this paper could contribute to our further understanding of the LC behaviors for heavy vehicles and passenger cars.
rate research
Read More
Emergency vehicle (EMV) service is a key function of cities and is exceedingly challenging due to urban traffic congestion. A main reason behind EMV service delay is the lack of communication and cooperation between vehicles blocking EMVs. In this paper, we study the improvement of EMV service under V2I connectivity. We consider the establishment of dynamic queue jump lanes (DQJLs) based on real-time coordination of connected vehicles. We develop a novel Markov decision process formulation for the DQJL problem, which explicitly accounts for the uncertainty of drivers reaction to approaching EMVs. We propose a deep neural network-based reinforcement learning algorithm that efficiently computes the optimal coordination instructions. We also validate our approach on a micro-simulation testbed using Simulation of Urban Mobility (SUMO). Validation results show that with our proposed methodology, the centralized control system saves approximately 15% EMV passing time than the benchmark system.
Autonomous vehicles bring the promise of enhancing the consumer experience in terms of comfort and convenience and, in particular, the safety of the autonomous vehicle. Safety functions in autonomous vehicles such as Automatic Emergency Braking and Lane Centering Assist rely on computation, information sharing, and the timely actuation of the safety functions. One opportunity to achieve robust autonomous vehicle safety is by enhancing the robustness of in-vehicle networking architectures that support built-in resiliency mechanisms. Software Defined Networking (SDN) is an advanced networking paradigm that allows fine-grained manipulation of routing tables and routing engines and the implementation of complex features such as failover, which is a mechanism of protecting in-vehicle networks from failure, and in which a standby link automatically takes over once the main link fails. In this paper, we leverage SDN network programmability features to enable resiliency in the autonomous vehicle realm. We demonstrate that a Software Defined In-Vehicle Networking (SDIVN) does not add overhead compared to Legacy In-Vehicle Networks (LIVNs) under non-failure conditions and we highlight its superiority in the case of a link failure and its timely delivery of messages. We verify the proposed architectures benefits using a simulation environment that we have developed and we validate our design choices through testing and simulations
Lane change is a very demanding driving task and number of traffic accidents are induced by mistaken maneuvers. An automated lane change system has the potential to reduce driver workload and to improve driving safety. One challenge is how to improve driver acceptance on the automated system. From the viewpoint of human factors, an automated system with different styles would improve user acceptance as the drivers can adapt the style to different driving situations. This paper proposes a method to design different lane change styles in automated driving by analysis and modeling of truck driver behavior. A truck driving simulator experiment with 12 participants was conducted to identify the driver model parameters and three lane change styles were classified as the aggressive, medium, and conservative ones. The proposed automated lane change system was evaluated by another truck driving simulator experiment with the same 12 participants. Moreover, the effect of different driving styles on driver experience and acceptance was evaluated. The evaluation results demonstrate that the different lane change styles could be distinguished by the drivers; meanwhile, the three styles were overall evaluated as acceptable on safety issues and reliable by the human drivers. This study provides insight into designing the automated driving system with different driving styles and the findings can be applied to commercial automated trucks.
In order to minimize the impact of LC (lane-changing) maneuver, this research proposes a novel LC algorithm in mixed traffic. The LC maneuver is parsed into two stages: one is from the decision point to the execution point (finding a suitable gap), and the other is from the execution point to the end point (performing the LC maneuver). Thereafter, a multiobjective optimization problem integrating these two stages is constructed, in which the comfort, efficiency and safety of the LC vehicle and the surrounding vehicles are simultaneously considered. Through introducing the NSGA-II (Non-dominated Sorting Genetic Algorithm), the pareto-optimal frontier and pareto-optimal solution of this problem is obtained. The nearest point of the frontier to the origin is used as the final solution. Through the micro-level analysis of the operating status of each vehicle, macro-level analysis of the traffic flow state within the LC area, and the sensitivity analysis of pareto-optimal frontier, we verify the performance of our proposed algorithm. Results demonstrate that compared with the existing algorithm, our algorithm could provide the optimal execution point and trajectory with the least impact on surroundings. The operation status of the traffic flow within the LC area has been significantly improved. We anticipate that this research could provide valuable insights into autonomous driving technology.
Non-signalized intersection is a typical and common scenario for connected and automated vehicles (CAVs). How to balance safety and efficiency remains difficult for researchers. To improve the original Responsibility Sensitive Safety (RSS) driving strategy on the non-signalized intersection, we propose a new strategy in this paper, based on right-of-way assignment (RWA). The performances of RSS strategy, cooperative driving strategy, and RWA based strategy are tested and compared. Testing results indicate that our strategy yields better traffic efficiency than RSS strategy, but not satisfying as the cooperative driving strategy due to the limited range of communication and the lack of long-term planning. However, our new strategy requires much fewer communication costs among vehicles.
Log in to be able to interact and post comments
comments
Fetching comments
Sign in to be able to follow your search criteria
